Trev

Problem is is that he is using the standard 4age rwd headers.

At Goodna? If you got the plates or diff off me then yes.

I used the AE82 slave cylinder on my rwd setup, I was using the AE82 starter as it has a different solenoid location but this was with TRD copies, if you want, you can borrow one of my starters to see if it fits.

:dance: :party:

Always wanted to get onto the HPV team at high school as they had 2 teams but I changed schools and the school I changed to didn't have any.

Went up and did a few things to it today like flush the radiator and check engine earths as once it is running for a few mins the temp gauge goes to hot and the fuel needle goes way past the full mark, the car does not seem to be getting hot so I will look over the dash earths. One thing I noticed though when I looked in the engine bay fuse box was this: It is a make shift headlight (not parkers) warning alarm that works when the lights are on and the ignition is in the off or acc position, this isn't a bad idea as I was going to buy a headlight warning system for it. From what I could see it only has 2 wires, 1 goes to the HEAD(RH)(headlight) fuse and the other to the ENGINE fuse, it isn't loud but you can hear it, I will place a similar buzzer in the dash and hook it up to both park and headlights.

Yeah trying for H/L & BB as it will be the club and whoever we invite as it is closed to the general public, I have to find out what is there still for facilities as I know it used to have dump toilets but that was 20 years ago and I will see if there is power, showers don't bother me as there is the dam. * BBQ Area * Disabled Access * Facilities for members with a disability * Launching Ramp - cement * Launching Ramp - sand * Member Parking * Rigging - lawn * Rigging - Sand

Needs moar low :P

I suggested moogerah at the weekend but there is no chance of finding a spot over the xmas break as it is a skiing hot spot.

East side of wivenhoe dam, Just gotta speak to the sailing club.

Not as many as there used to be with rodders grabbing them, this one was meant to be going into a rod but he lost interest.

Hiro stop trolling wiki and writing it to make out you know it, it is fvcking annoying. OP: There is a guy at road and track selling a rover v8 that needs to be assembled.

My bum, oh he raped me, he sodomised me. :lolcry:

"DANCE RUMMY" :dancetall: TABLE

Anodised nuts work a treat.

After all my humour, I have to say that the funniest quote came from Dougy talking about his table. (something like) "It's good but I wouldn't go dancing on it" :lolcry:

Well at least the problem was not a hard fix.

Good to meet you Trev, was a great night out, can't wait for the next and I am currently working on a spot where if I get it then we will be the only ones in there and we lock the gates. Music and shenanigans as much as we want.

A very good condition twincam gearknob for free that if I paired with my wheel (that is near perfect would fetch 400 odd dollars, well worth a pic to me. Starting to think about pulling the hachi ni from the title.

oooh purty

I has my stuff, bring it on.

Ok, well I forgot that the daughter doesn't finish dancing till 12 at Boronia heights so I will look at leaving around 1:30, if that is too late for other members then that is fine as I will head out without the group and just say hi at the meet point.

Sister is giving me an advance so I am coming. What are the plans for the servo meetup?

Tent and shit.

Not sure if I can come, have not been paid yet and was hoping to so I could get a tent, supplies and fuel, I am seeing if I can borrow some money and if I can then I am still in.