Jump to content

Des

Senior Member
  • Posts

    3158
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Des

  1. Merry Christmas to everybody and have a exciting SAFE new year :ninja:.
  2. Starter is on the exhaust side and it works fine on mine, bites in and spins the flywheel up. 4AGZE - 4AC manuel sandwich plate - 20v flywheel with pilot bearing installed in crank - Exedy clutch - T-50 input shaft. Best to get a 2nd hand flywheel machined/surfaced before use.
  3. Mine is a AE92 4AGZE (same as aw11 just dli) and the flywheel would not fit in the bellhousing so i got a silver top 20v flywheel and it fits nice. If you get a 20v flywheel or a 100kw smallport 4age flywheel you will need a clutch from a AE92 SX (100kw smallport) corolla. If you get a flywheel off a bigport (AE82 twinky) you will need a clutch from a AE82 twinky. You also need a spigot/pilot bearing for the crank if its going on a T-50. The main reason why the 4AGZE flywheel doesnt fit is due to the sheer hieght of it. Des :ninja:
  4. Thats a good price :ninja: :hmm: .
  5. hahaha suckers mine is still too quick bahahahahaha :ninja:
  6. Des

    The Kesev!

    Yep I'm going to get it cut up so instead of it point up and over the top of the SC it point straight out the front. But Xmas is sucking up the funds so it needs to wait till after the new most likely.
  7. Des

    The Kesev!

    When i turn the intake pipe around to face the front it hits the supercharger outlet any idea's to make it fit ?
  8. Nay, Mikeys case is an exception but for australia people if you can't be bothered looking on ebay then you don't deserve to find cheap parts or cars.
  9. Has to be a short somewhere.
  10. Option B looks awesome to me.
  11. Would it save fuel on long trips or just be a pain in the arse like most emissions control from that era ?
  12. Isnt the speedo driven by a cable ?
  13. Manuals can start in any gear.
  14. Does the speed sensor actually control anything ?
  15. Des

    The Kesev!

    I have some photo's of the progress so far. i didnt post them earlier due to the computer not liking my phone for a while.
  16. Driving on Ripley rd at night out here with my mate we spotted a "lizard" on the road so i drove on the opposite side of the road and the "lizard" ran across the road and went under my right hand side tires, So i stopped got out and went to have a look at the "lizard" and it flew away. I got back in the car and thought WTF was that and because we were in the middle of nowhere and not a house for 15km i locked my door and left. The next day i was thinking about it for a while and ive come to the conclusion that the so called lizard must have been a weird lookin bird. :ninja:
  17. Ive herd of sc12's (4agze model sc) holding 13 psi for a few years. SC14's (1ggze model sc)pump more air and turn slower than the SC12 so inturn are better. correct me if I'm wrong.
  18. Des

    The Kesev!

    Problem solvered. I'm using one of the stock top mounts and making 2 bars for the big bottom mount and bolting it up where the AC use to be so it still lines up with the pulleys plus it clears the sway bar and the exhaust to be.
  19. Des

    The Kesev!

    I got the motor in yesterday arvo. I need to relocate the alternator as it hits the sway bay and i found out that the gearbox crossmember thread on the car has been floged out and i need to rethread it hopefully on Saturday. Since the gearbox crossmember can't be put on yet the gearbox is being held up with tie wire and a wheel brace.
  20. At least your getting back on track sort of :'(
  21. We are all a happy bunch here well most of the time and it gets a bit hard and anoying to read threads when people don't use proper english. u - You n - And hunge - hundred ? stez - stereo If you try to punctuate properly and still mess it up who cares just aslong as you tried. Des :'( PS: Need ae71 wagon parts give me a buzz.
  22. don't EB's have mulit point injection. :'(
  23. Des

    The Kesev!

    Ive got the exhaust side mount on properly as jason said I'm going to be cutting the super charger mount off and grinding down that stud tomorrow and then put the f@$ker in. If panel van bumpers come round cheap id grab them quick smart but meh it doesnt worry me to much now.
  24. Des

    The Kesev!

    Gearbox is on and all good. I don't need to get the broken bolt out now because its not going to be used. The engine mount for the inlet side has a alignment stud in the way and it needs to go where one of the sc mount are but it wont fit, i would post pics but my camara is licked at the moment
×
×
  • Create New...