Des

Part number for the spigot bearing is 6001 i think and it cost me $6.

4age clutch is recommended.

Wasn't over heating in the 70 so maybe they have different temp senders ?

Thats right :P Dwindling quick, Good year gives me NEW tires cheap as so i can't complain.

Got my tail shaft made up, Drive line is the place that did it and they are the biggest bullshitters i have ever talked to, I ask for my original shaft to be shortened 20mm and the pajero flange welded on, They said yep $200 and its done. When i went to pick it up and they said they don't know if its been shorten 20mm WTF ? They wanted me to take the whole car in and well I'm not doing that but anyway it fits. Car drives great but the tires scrub out, flaring here i come. Does "other" things very well too.

Cut one corner off the supercharger mount not the whole thing. Custom bracket to make it sit higher otherwise it will hit the sway bar area. I had the spacer made up out of alloy for $70

Well i paid $200 for 1X AE71 pedal box 1X AE86 engine cross member 1X AE86 gearbox cross member 1X slave cylinder 1X steel clutch line 1X master cylinder For what you need, $150 tops for all of it.

This is what you need. Ae86/ae71 engine cross member Ae86/ae71 gearbox cross member. Ae71 manual pedal box with hydraulic clutch master cylinder. Ae71 metal clutch line that goes around the back of the motor. Ae86/ae71 metal engine mounts that bolt to the motor itself. ae86/ae71 rubber engine mounts. Ae86/ae71 gearbox stays (optional). Ae86/ae71 sandwich plate. All bolt in affair.

*Drools* Always good to hear that a Ke70 is taking down GTR's etc on the corner's Des :P

Yeah, The tires are way to small for the rims, 185's on a 8 inch rim :P I can't get dads rims on that are on his pajero, Tire's are too fat and the rims don't fit over my brakes. 205's will be on soon.

f@$k yeah

Ca18det will suck more fuel that a 4ac ever will so i would upgrade ALL the metal lines to larger items.

Looks clean, Any plans for it ?

Some one take some picture's for me.

Girlock crap. They look like the ones that fook had on that ke55 pinky ?

Maybe, I need to make up my mind on what i want to do with the front brakes. Rear disc's are 320mm and front are 270mm so i want to upgrade the front but i don't know what to go for.

Carport :) My "testing" grounds for my diff ?

I doubt it, Tail shaft needs some love. Didn't buy any tires today coz i got some freebies that I'm going to be "testing" the diff with. 185/65/R15 on a 8 inch rim = Dad going off his tit. Des :)

Purple ? Sexually deprived. :)

OMGWTFBBQ!!!!111ELEVEN 2 years.

*drools*

Just make a plate out aluminum or something, I made a mount for my coils in my ke70 ages so a little plate should be easy as and it just covers the hole in the block.

Blast down and stop in here on ya way up.

Rims arrived. Brad is a legend and so is Matt for the tires.