December 6, 201213 yr comment_638946 Not sure if it has been mentioned but what do the plates stand for? Report
December 7, 201213 yr comment_638961 went 9.92 yesturday Was that the corolla or the cresida, I'm sure the cressy was his daily Report
December 7, 201213 yr comment_638962 Not sure if it has been mentioned but what do the plates stand for? If you mean 0KE-020... it's a KE20. I haven't seen any plates on this one. Report
December 7, 201213 yr Author comment_638968 Hey guys, yep the 1uzfe-t KE20 ran 9.92 @ 137, unfortunately the car pushed through the foot brake on the line a bit tripping the beams a few tenths before i let it go. The car has no roll cage or harnesses etc so i was only ever going to get one pass. The resulting 60' was a 1.72 where as in reality it would of been closer to a 1.4, I did not realise i fumbled it and it felt strong so i made a pass out of it. Luckily it still went a 9 which is all i wanted to do with it, 1 tenth in the 60 is usually worth 2 at the end so i am thinking it would of went 9.50s fairly easy. Pretty happy with it, it runs a stock 1uzfe + arp rod bolts, commetic gaskets, arp head studs and upgraded valve springs. The turbo is a copy gt42 and the gearbox was an unknown $150 special with a few mods. The ODU400 plates are the original plates from the 2JZ ke20, some people think it means DO U in 400m, I usually run those plates on whatever my daily drive is. Jordan - this car runs stock leafs + caltracks on a shortened 1 tonner 10 bolt diff of all things, the 2jz car runs stock leafs, caltracks, 2 link and a large anti roll bar similiar to what they run in door slammers & a hilux diff. Some pics from wednesday night Edited December 7, 201213 yr by oke020 Report
September 2, 201313 yr comment_666076 have you tubbed the rear at all and were and cuts made to fit the diff. Report
September 2, 201313 yr comment_666079 have you tubbed the rear at all and were and cuts made to fit the diff. I would be inclined to say scotty has squared the outer guards Report
September 4, 201313 yr comment_666220 oke020 are the caltracs you run the actual caltrac brand bars or have you made up your own set? Cheers Report
September 4, 201313 yr comment_666221 Can I suggest you visit his website Google OKE 020, Scotty has alot of info on there, and him being in the game for a while and owning his own business knows how to make or where to source parts From the information I know, caltracs are from America and are around 5-600 bucks for a set, and most fab shops have access to them Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now