PMP020 Posted January 22, 2009 Report Share Posted January 22, 2009 was this diff already cut down to suit an early mazda? now ur just changing mounts to suit ke20? would make sense. cheers, scott Quote Link to comment Share on other sites More sharing options...
13BT_KE20 Posted January 22, 2009 Author Report Share Posted January 22, 2009 was this diff already cut down to suit an early mazda? now ur just changing mounts to suit ke20? would make sense. cheers, scott your on the money scott, had been shortened to suit a S1/2 RX7. So ive just cut the mounts off and will be sending both diffs (hilux and stock) down to get the KE20 mounts welded on. Piss easy and means i can retain the same stud pattern and finally use those wheels i bought off you AGES ago :P Quote Link to comment Share on other sites More sharing options...
Murd 55 Posted January 22, 2009 Report Share Posted January 22, 2009 awesome, so a cruise will be in order shortly then i assume :P Quote Link to comment Share on other sites More sharing options...
13BT_KE20 Posted January 22, 2009 Author Report Share Posted January 22, 2009 awesome, so a cruise will be in order shortly then i assume :) asap, its almost been a months since ive driven it! probably another month off being ready tho, by time i do all the suspension, front brakes, gearbox xmember, exhaust, stereo and guages Quote Link to comment Share on other sites More sharing options...
MYSTIK[RL] Posted January 22, 2009 Report Share Posted January 22, 2009 (edited) so in other words march/april :no2: that sucks, i say a rollaclub working bee is needed then :) Edited January 22, 2009 by MYSTIK Quote Link to comment Share on other sites More sharing options...
13BT_KE20 Posted January 22, 2009 Author Report Share Posted January 22, 2009 so in other words march/april :no2: that sucks, i say a rollaclub working bee is needed then :) yeah mate, but id rather get it all done right and in one hit. Quote Link to comment Share on other sites More sharing options...
13BT_KE20 Posted January 24, 2009 Author Report Share Posted January 24, 2009 BEFORE: AFTER: Quote Link to comment Share on other sites More sharing options...
SLO-030 Posted January 24, 2009 Report Share Posted January 24, 2009 AFTER: You used VB to Bring a shine to your lights? Quote Link to comment Share on other sites More sharing options...
Browland Posted January 24, 2009 Report Share Posted January 24, 2009 Hi just wondering were the seats already done when you bought the car or did you get them re-uphulstered? If so do you remember the name of the place that did them. Most places i have asked said its to hard to put the lines in them but yours look as close to factory i have seen. Thanks Brett. Quote Link to comment Share on other sites More sharing options...
13BT_KE20 Posted January 25, 2009 Author Report Share Posted January 25, 2009 You used VB to Bring a shine to your lights? :) nah mate, couple of hours of my time and a few selected products makes them come up a treat. i mainly wanted to get rid of the brown/rust colour in one of the reverse lights. They came up better than i thought, pretty havppy with them. Hi just wondering were the seats already done when you bought the car or did you get them re-uphulstered? If so do you remember the name of the place that did them. Most places i have asked said its to hard to put the lines in them but yours look as close to factory i have seen. Thanks Brett. hey brett, I bougth the car with the interior retrimmed, the previous got it done. Hes a member on here, username is KE20ME maybe shoot him a PM :no2: Quote Link to comment Share on other sites More sharing options...
Murd 55 Posted January 25, 2009 Report Share Posted January 25, 2009 BEFORE: AFTER: please do share the secret! shoot me a PM if you don't want to tell anyone but my tail lights are horrid and i am searching for any way to make them better! Quote Link to comment Share on other sites More sharing options...
Browland Posted January 25, 2009 Report Share Posted January 25, 2009 hey brett, I bougth the car with the interior retrimmed, the previous got it done. Hes a member on here, username is KE20ME maybe shoot him a PM Thanks, Yeah, I bought some parts off Henry a while a go. Ill give him a try. Quote Link to comment Share on other sites More sharing options...
13BT_KE20 Posted January 28, 2009 Author Report Share Posted January 28, 2009 both diffs got dropped off at the workshop today to get the new mounts welded on, new U-bolts made, bottom plate holes welded and new ones redrilled. Also picked up my drums, i had the over edge machined down to give me a little more clearance inside the wheel, as there large drums and I'm only going to be running a 14 inch rim on the rear. They did fit but i wasnt comfortable with how close thay came to fouling on the inside of the wheel. Diff is expected to be done by early next week, in the mean time i will be getting a new brake line made up for the diff to body brake line. I also need to get a hilux rear yoke so the tailshaft can be made as soon as the hilux is bolted into the car. Both easily done, will more than likely get both done tomorow. Quote Link to comment Share on other sites More sharing options...
StasIII Posted January 28, 2009 Report Share Posted January 28, 2009 Let me know if your hilux housing hits the floor and did you need to modifiy the bumpstop Quote Link to comment Share on other sites More sharing options...
13BT_KE20 Posted January 28, 2009 Author Report Share Posted January 28, 2009 Let me know if your hilux housing hits the floor and did you need to modifiy the bumpstop F#%K i hope not i don't want to cut/bash the floor, i do think i will need to cut the bump stop in half though to allow for a bit more suspension travel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.