Jump to content

Taz_Rx

Global Moderator
  • Posts

    6796
  • Joined

  • Days Won

    54

Everything posted by Taz_Rx

  1. Yeah relly good mate. I'm now a MSCT member (obviously) and got an 12 month S2 licence aswell, so wasn't a cheap day...but the next one will be!!! And I can now do club days for the daily entry fee! :yes: Which Tar will be seeing very soon. Had heaps of fun, as did everybody there I think - 22 entries all up. Wasn't all the bumpy at all, but got pretty boggy by the end of the day, which didn't help being the last to go every time! :hmm: I was # 22. Pretty sure the next one is in 4 weeks time at Archer's Manor again, so will be much more suitable for you. I'll have Tar at that one too. :yes:
  2. email them to me and I'll host them, send me a PM for email address. OR do you know you can upload pics here? Just use the attachments box at the bottom when making a reply. :yes:
  3. Taz_Rx

    Dirt

    Yeah I know mate! :yes: that car is built from left overs. 4k block in it has seen over 20psi, rings and valve stem seals need replacing. Just planning in doing a cheap re-build on here soon.
  4. Taz_Rx

    Dirt

    Took the old girl out for a thrash at the Symoonds plains grass motorkhana.. More pics and vids here, will slowly upload more tonight. http://s23.photobucket.com/albums/b396/taz...rkhana/28-9-08/ Rained last night so was a bit slippery, and turn a bit boggy by the end of the day, and ofcourse I was last in order! :yes:
  5. Took a few pics and vids of my car... well Katie did. And I took a vid of Josh's little bro's t18. I slowly upload them all hear tonight.... http://s23.photobucket.com/albums/b396/taz...rkhana/28-9-08/ Good day...and yeah she was a bit smokey as usual :yes:
  6. yes the tappet covers with swap over. I myself would use the 5k one as it has a screw in 710 cap, not push in. :yes:
  7. Whoa been diggin buddy! :yes: Well looks like you serached anyway, so good for you! :yes: Put up a wanted add in the right section with a location and you might be able to find a cheap 5k head. You could buy a new one still from toyota as they're still putting them in forklifts, but it would cost a bit. :hmm:
  8. I'm just about to head out. Hope to see lots of you there!! :hmm: :yes:
  9. Hi David, Yeah You're correct, the tabs under 1 & 4 indicate dishies on either a 5k or 4ku. So you can use either a normal 4kc or maybe a 3k big port head if you can find one to drop your CR.
  10. haha sweet, sorta makes our gathering a bit ordinary! :yes: See if ya's can yell something out like i dunno "up the rolla" so we can try and hear out for you! :hmm:
  11. How do you go against the Aussie race cars/future races?? Your car must be light, but not that light!!
  12. Just like painting, its all in the prep work getting it smooth. You can polish pitted alloy, but it looks like 'polished pitted alloy'. 1200 wet FTW!!
  13. You want to drive dirt too Josh? Grass means I don't have to re-fit the weldy! :hmm: Could turn out more like a "Come play in dirt day"! :yes:
  14. Its a dirty Datsun dude!!! :yes:
  15. Funny randomness..... http://au.youtube.com/watch?v=mhhhh1QiT-U
  16. You obviously did a whole lot of searching first hey. No you can't turbo a K motor because they have pushrods...... :yes:
  17. Box around the whole carby means you don't need to make sure its perfectly sealed. If you carb is in good nick you can just put a hat on it. However I would be more inclined to just make one from scratch rather than trying to weld a thin metal airfilter housing! :yes:
  18. Yeah I might have to bring a couple of different sized screens home. 8'x6' for inside, 10'x7.5' for outside!! :dance:
  19. Don't tell me Nickz is!! :dance:
  20. Depend on how free flowing your exhaust is as to weather it'll blow flames. Best done down hills..... Throttle flat to the floor > and turn the key to off > wait a few seonds > turn key back to on > BANG Because the coil is no longer firing, the plus don't burn the fuel in the engine and pump it into the exhaust (remeber your foot is flat). when you tuen back to on it spark through the exhaust ignite the fuel and make a bang. Fink must have had a muffler full of fuel and blow it open when it ignited. :dance:
  21. Yeah and your pushy doesn't have a rego plate, so put your foot through his drivers side window!!! :dance: extra points if you collect his head too!! :yes: He deserves it after what he's done to you!
  22. Call/SMS me Saturday arvo/night and see where I'm at with Tar. If I take dirt you're welcome to drive it too! :dance:
  23. Do the motor first and then 'get around' to the body. :yes: If it looks like shit on the outside, then you get a better wow factor when you blow the doors off something!! hehe .......not that a 4age can blow doors off anyway! :dance:
  24. Did you get his rego mate? Hit and run or "Leaving the scene of an accident" is a pretty serious offence!!! No matter what vehicles are involved.
  25. Just saw you said something about pulling the motor out in OT. So are you going to put the turbo 3t into Lloyds Coupe? And who's buying your car/sheel?
×
×
  • Create New...