Jump to content

Millaz88

Regular Member
 View Profile  See their activity

  • Posts

    232

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Millaz88

  1. Millaz88
    They were el springs I just took them put but vl ones work good There diameter is smaller then fords
  2. Millaz88
    How do you run coons spring in the front I tried they just kept popping out cos they were like 5mm bigger diameter then stock
  3. Millaz88
    I have modded ke70 lca's +21mm and corona power steering arms all works well together and gives around about -2 degrees camber and lowered to top of the tyre level with the guard With a good wheel aligment I have next to no bump steer and it's quiet tame on bumpy roads Cheers Miller
  4. Millaz88
    Not bad for 40mm extra track on the front end :) Handles so much better not the front toe was out by +6.5mm
  5. Millaz88
    Got a wheel aligment today Don't know what all the things realy mean but drives way beret Wound the caster right out now about +6 Camber is -1*55'? don't know what that means lol
  6. Millaz88
    I need a 5k for my ksev so do a low comp setup and sell it to me cheap lol Also were do we get $60 regrinds? I want this alalalalaah
  7. Millaz88
    Haha slowly die love it hahahahaha Lucky he is an engine slut and has 3738563 other engines laying round lol
  8. Millaz88
    So it was the cap!! I shoulda bought mine over the other night to test it out lol Get rid of that noise??
  9. Millaz88
    You need a ae71 x-member dude Ae92 are fwd it won't work
  10. Millaz88
    I had the same idea man I would be like hey look at this guys bam oopppps I rolled it now time for the ER
  11. Millaz88
    Holly dam just looked at some ways Some people are very innovative I never would have thought of the hair spray trick but it's a smart idea although dangerous but still very macgyver I liked it :) Cheers Miller
  12. Millaz88

    Ratola

    Millaz88 replied to Jordain's topic in Rollaclub Rides

    Love the sicker bombing man Where did you find all the stickers that's a good collection Will be a sweet ride once she is all together mate Miller
  13. Millaz88
    Nah I got all 4 in getting done 14x8 o ofset should come out alright I went woth gas so I didnt have to setup efi so hopefully it all works out as planned ;)
  14. Millaz88
    i sure am just sucks I'm starting a job at esso over at the long island gas plant so i need it to get there and back for a couple weeks and can't leave the mrs without a car cos the new baby so makes the e7 my daily and puts things out off limits for now :( don't know what cfm the b2 is but will flow upto 296 bhp so my lil rolla should be sweet
  15. Millaz88
    got a few goodies this week apa gas tank b2 converter moddified for boost gas research throttle body garrett t25 turbo small intercooler turbo smart boost tee also got some new wheels sorted out 14x8 still want to sand blast the lot and repaint the lot black bring on the stretch 185/60 wooooooo now to fit it all lol let the fun begin cheers for now miller
  16. Millaz88
    Most cars have the oxy sensor on the dump pipe if it was right on the j pipe or manifold if might get to much heat and wouldnt last to long Just my thoughts anyways Cheers Miller
  17. Millaz88
    Best thing for that would be soda blasting and lucky I know a guy who does onside sofa blasting pm me if you want his contact details Cheers Miller
  18. Millaz88
    So the mrs tells me you had a status on f/b saying possible blown h/g? What's the go dude musta not been driving it hard enough haha
  19. Millaz88
    I like those tail lights dude I was cruising behind you checking out your rear ;) Need to clean up the middle piece were it used to say corolla tho needs more smoothness Looks good over all tho you have done a good job Cheers Miller
  20. Millaz88
    There's that stuff they sell at bursons it's glue amd powder amd you mix it and welds like steel looks strong maybe have a look?
  21. Millaz88
    Thanks man Always nice to get a complement :)
  22. Millaz88
    Laser cut exhaust Laser cut carby plate 10mm thick $55 delivered Seams like a good deal to me
  23. Millaz88
    Perfect lol thanks mate
  24. Millaz88
    That's what I was thinking might be to thin... Also I'm not fussed with shinny it will all be wrapped so mild steel is fine it's only a steam pipe welb up job so yeh anyone? Or even a reasonable place around Melb I don't have any issues paying I just am not paying out the nose
  25. Millaz88
    Same here mate What do we do if we see him? Let the tyres down so he can't leave and call the popo or just note where we see him to you?
×
×
  • Create New...