Trev
-
Posts
6398 -
Joined
-
Last visited
-
Days Won
29
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Trev
-
Typical K motor, needing to use A series bits to get somewhere :laff: I like it, very well done and would be cheaper then a 3kr.
-
I don't know the value but you need to go over and check them with feeler gauges and adjust accordingly, how did you set it up prior to this?
-
ok, what is his opinion on it then? Go over and recheck the valve clearances.
-
Ha, off to get new o-rings tomorrow so we can work on it saturday.
-
Did you bed in the cam?
-
oh shit, well I dunno what to try on it, maybe even unplug the tacho from the module.
-
Maybe try another ignition module.
-
Not that I am aware of, I used the standard 4age coil with mine.
-
If it is sucking air then block it off.
-
No I meant no point wasting money when you can get the standard on to work for around $20 and advance is only there for economy.
-
A mate and I trying out for LMFAO dancers:
-
Nah it's ok.
-
Ok mate, if not what about friday? Have you checked to see that the plugs are not fouled too much?
-
Ok, is it attempting to start yet?
-
As foo said, goes to the charcoal can.
-
On a 4age 3 goes to dizzy red and 7 goes to dizzy black, you have the polarity around the wrong way.
-
I shall ask Ivan next time he comes into work.
-
Fuel flows towards the arrow head so arrow head to the fuel rail.
-
I would rather put a BMI onto the standard dizzy and have no advance then have to buy an electronic dizzy from a K motor and get a few bits made up for it. Was the hyperpak $320?
-
What are we talking about with the advanced issue? A too far advance engine will struggle to start, is that what you are asking? Tom, when I come over I will bring the LED test light if you don't have one.
-
+1
-
ok, Z200 at supercheap was $16
-
If you look on the charts they state 'advertised' what they advertise and what you may get will be different.
-
Looks like a generic bosch ignition module.
-
Close to the specs of it.
