ke36 wagon Posted May 11, 2008 Report Share Posted May 11, 2008 Hey guys I'm new to this website, i own a ke36 wagon, its basically stock at the moment other than an exhaust system, anyways I'm after a bit more power than the stock 3k engine has to offer at the moment, I'm a second year boilermaker so i don't have thousands to spend although i have a reasonable budget, I'm just curious on what engine anyone would recommend to drop into the wagon??? ive looked at a few engines already but am still unsure. I preferablly don't want to go injected id prefer to stay carby. Any help and advice would be greatly appreciated, cheers :D Quote Link to comment Share on other sites More sharing options...
Medicine_Man Posted May 11, 2008 Report Share Posted May 11, 2008 4K or 5K upgrade depending on your budget.. Quote Link to comment Share on other sites More sharing options...
[email protected] Posted May 11, 2008 Report Share Posted May 11, 2008 id go for a 4k with little things like extractors, exhaust just for the extra flow and a webber if you can find a cheap 1. a 5k can be a little triky to find some parts and a little more expensive too. 4k will last a a lifetime and will run till your old and grey... cheap as shit too even free. just give it an overhoul... Quote Link to comment Share on other sites More sharing options...
Toy-Yoda[RL] Posted May 11, 2008 Report Share Posted May 11, 2008 7K and 5 speed, They're epic to drive......... (even with noisy wheel bearings) :D So much torque, it'll blow your mind........ Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted May 12, 2008 Report Share Posted May 12, 2008 ^^^^^What he said!!! :) :D Quote Link to comment Share on other sites More sharing options...
ke rollin 20 Posted May 23, 2008 Report Share Posted May 23, 2008 7K and 5 speed, They're epic to drive......... (even with noisy wheel bearings) :( So much torque, it'll blow your mind........ hey mate whats the go with a 7k into a 36, 38? will it just slot straight in or????? cheers haydo Quote Link to comment Share on other sites More sharing options...
leigh Posted May 23, 2008 Report Share Posted May 23, 2008 hey mate whats the go with a 7k into a 36, 38? will it just slot straight in or????? cheers haydo U will need to mod the sump, other wise it hits the crossmember! Quote Link to comment Share on other sites More sharing options...
Toy-Yoda[RL] Posted May 23, 2008 Report Share Posted May 23, 2008 (edited) ^^^^^^^^^^^ What he said. :( I can't remember precicely, but I think you need the 7K engine mounts too........ Edited May 23, 2008 by Toy-Yoda Quote Link to comment Share on other sites More sharing options...
Jono Posted May 23, 2008 Report Share Posted May 23, 2008 thought about a carby rotary? Quote Link to comment Share on other sites More sharing options...
doityourself Posted June 9, 2008 Report Share Posted June 9, 2008 Have you thought about a 3T-c set up with a TA22 5 speed, the 3T motor can then be bored to 2000cc capacity. Quote Link to comment Share on other sites More sharing options...
calaissix Posted June 9, 2008 Report Share Posted June 9, 2008 check what you can legally increase the engine size by before you decide on anything,if its illegal you are liable,if someone gets hurt it could cost you big time Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.