Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Chestikoph Sr20Det Ke55 Coupe

Featured Replies

Hey guys

Have been a member of this forum for a little while and thought i might start my own rides and project post.

Here's the run down.

Bought a ke55 coupe off the net all the way from our sunny capital Canberra, which is a fair way considering i live in Perth, i had been on the look

out for a couple of months over here but nothing was coming up, got impatient and grabbed this one.

post-4551-1229094059_thumb.jpg

post-4551-1229094111_thumb.jpg

It's pretty straight save for a few small dings in the front and back, of which one has been fixed, and little rust in the usual places.

(not as good as it looked in the photos when it arrived, the guy was a good photographer ) it's always a risk when you can't physically see the car.

Plans so far is decent brakes and suspension first (already sorted the front).

post-4551-1229095004_thumb.jpg

will post up specs if your keen

Then engine conversion, driveline and then take her all apart and give the body some treatment.

And as many bits and pieces in between.

Hope to keep it pretty streetable and still be able to do some track days at wanneroo, motorkhana and small tarmac events.

Will post up future mods and stuff i have already done in the coming weeks, let me kow what you think and any good advice is apreciated.

Thanks for reading.

Edited by chestikoph1

  • Replies 344
  • Views 355.8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • chestikoph1
    chestikoph1

    Pretty much finished. Turned out ok, I think? Doesn't give too much away when the plates are on. Only need to do the short hose from the block to the thermostat. Thermostat fully opens at 86 degre

  • chestikoph1
    chestikoph1

    I have had to butcher up the dash in order to fit back in around the cage, the Carlos bars have made it really  hard to get it back in. It has to wedge between that and the A pillar bar for to fi

  • chestikoph1
    chestikoph1

    Have made a start on the inside of the car, ripped out the old sound deadening off the inside of the firewall and stuck on some dynamat. I want the cabin to be nice and quiet. This stuff is great, e

Posted Images

Nice looking ride.

 

Looks like the ###### rx7 calipers and brackets, redrilled civic rotors and I'm guessing the coilovers are also ######. The rx7 calipers are great i run a set on my vl and it pulls up without trouble after i got some QFM pads in there.

 

edit: forgot thats a forbidden word around here.

Edited by furryfrog

  • Author

The front setup is as follows

shortened sprinter struts converted to coilover and hubs

sprinter power steering arms

bilstein short stroke motor sport inserts

ke55 adjustable tops ( not super happy with these, they work very well but they add about 40mm to the hieght of the front because they are so tall )

series 4 rx7 calipers, civic slotted rottors, ######. addapters ( a really nice piece of engineering ) and braided lines

rca's

upgraded swaybar only 20mm

and a whole lot of bushes.

I recomend the brake setup, pulls up realy well, have tried multiple setups in previous cars simmilar wieghts but not corolla's, and this combo works great.

Every thing pretty much bolts in only problem is clearance between rotors and the end of the lower control arm

nothing a few taps with medium persuader doesn't fix

seems to handle very well but can't comment conclusively, as the rear is still very sloppy still standard, hoping to sort it out after chrissy.

Edited by chestikoph1

looks good can't wait to see more :)

looking good, look forward to seeing the progress.

Where are all these clean hardtops coming from?.

I can never find them.

  • Author

Cheers for the comments

 

Thought i might post up some photos of some of the other stuff i have done since i have had it

redid the interior black.

Before

post-4551-1229206290_thumb.jpg

post-4551-1229206274_thumb.jpg

post-4551-1229206376_thumb.jpg

  • Author

And got rid of the steelies and put on a set of these

post-4551-1229206716_thumb.jpg

  • Author

I think i have shrink these photos down, can't seem to fit them into one post

post-4551-1229206903_thumb.jpg

lookin good! keeping the round lights??

  • Author

Yeah, keeping the round lights but thinking of changing the grill to the three bar instead of the five bar.

 

With the interior, I stripped all the trim, front and back, cleaned them really well, took the chrome strips off and then painted them with interior paint.

Then put them all back together, has been like that for about 6 months, seems to be holding up really well, no fading or peeling.

Hoping to ditch the standard seats soon and replace them with something a little more hugging. Not sure whether I will go down the path of a cage.

Last car I had was fully stripped, interior, cage, seats and harnesses, but was really uncomfortable day to day driving. The noise and the heat was almost imposible to deal with, so this one will remain relatively standard.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.