Rollaclub Rides

BOUGHT A GRANNY SPEC ROLLA KE70 FOR $1000 DAUGHTER WAS A BLONDE HOT HIPPY 6 WEEKS REGO IMBOLISER & CENTREL LOCKING RAIN GAURD HUBCAPS NEW RADIATOR ORIGINAL RADIO WORKING WITH ORIGINAL SPEAKERS ENGINE BAY VERY CLEAN INSIDE VERY CLEAN NO RIPS IN SEATS OR DAMAGE TO THE DASH ONE TINY BIT OF RUST AND ORIGINAL PAINT NO DINGS ORIGINAL MUD FLAPS STOCK SPRINGS STILL HAD THE STRIPES AND PROTECTOR STRIPS 1.3 4K RUNS PERFECT ONLY DONE 200,000 SO FAR CHOPPED SPRINGS BOUGHT XR8 SPRINGS FRONT BACK AND REAR SHOCKS FOR $1 CHROMIES ON THE FRONT BLACK STOCKIES ON THE BACK GETTING DEEP DISH WHEELS THIS WEEKEND AND HAVING THE CHROMIES ON THE BACK LOCKING D…

hey all i bought this ke20 a couple of years ago, a.k.a by the gold coast kids betsey. Anyway shes a 74 ke20 i have recently taken it off the the road due to a rusty chassie rail, when she was on the road i had put a 4k with 5 speed and 2" exaust aswell as a celica radiator not sure what type, it also had platnin plugs and a custom tail shaft ( stuffed to many uni joints on the old one) aswell as some 13*7's dragways i ended up taking them off they were scrubbing out a bit to much and also put the battery in the boot (in box) aswell as the other little stuff like a tacho vacume guage and autotechnica wheel heres some picks of betsey (green car)....................... …

Please delete.

gday just thought i show some pics of the very start of my track/drift car, the plans are for it to have a 20v 4age, ajustable suspension and full cage and more plans yet to come!! but at the moment my other rolla needs some attention so this has gotta wait for a while :lolcry:

Hi guys first of all thanks for the warm welcomed fronm the family of Rollaclub, I glad to be part of this group. I want to share se pics of my new addition, is my 1969 Corolla sprinter that I picked up few months ago definitely feeling very bless. I've own lots of old school corolla's but not a first gen because they hard to find up here in the States. This is a work in progress that may take me few years to finish but I'm glad that I get to save this car.

trying to do some body work on my 1989 AE92 hatch but am finding it hard to find cheap parts, if anyone knows anything can you get back to me. I'm looking for a front bar, side skirts and a wing (not a trolley bar but a nice wing:P lol) thanks Dagra87 ben

hey all just shipped the levin off to brisbane so it was time to pick up my new project i found a 82 flat front in beige, 1 owner, 100,000km with all books and service history up to date its a 4spd SE with aircon drive like new, with new tyres, smooth gear box and the lot. its got a few TINY rust spots on it but thats about a week away from being removed. the paint is pretty much immaculate all over, as i found tucked away in the books that this was done with paint protection back in its day. ... um not sure what plans i have for it as yet, but starting small and doing it properly. MODS 1. luisi deep dish with short boss 2. 15x8 challe…

i am putting a blacktop 20v into my girlfriends csi seca its got a 4afe and i was wondering if the 6speed c160 fits into it without having to do structural work plus how easy is it to do :jamie:

hey fella's now i no how to put pics on, here is a pic of my old girl. ill get some more soon mods= resprayed 3tg with twin solex carbs( playing up at the moment) t50 gear box white line front and rear sway bars i have got slotted rotors on front but now up grading to the corona strut,peugot disc and hilux caliper setup therfor ditching the jelly beans and getting some 16x7.0 superlites just got my radiator turned into a 3 core she's pretty fat now!!

i have a ae71 panal van i have been working on for ages a lot of people seem to like it does any one want to buy it

Hey everyone, i'm new to this forum so i'm sorry if this topic has been discussed before I was just recently given a 1976 Corolla that I believe may be a TE31 because of the VIN number, my guess is that it's the TE31? correct me if i'm wrong, because i'd really like to know. Anyways, there's absolutely nothing in the car, it's really just a rolling chassis. I was wondering where I may find parts to restore the car as well as upgrades to the suspension like coilovers, sway bars, etc I'm intending to put an N/A L28 engine from an 83 280zx which is about to get an engine swapped for itself, tell me what you guys think Here's some pictures of the car:

heres whats done so far 3.9 ratio locked diff. extreme heavy duty clutch. stock 4ac%nt with rebuilt head. straight out exhaust to homo spec cannon. resprayed acrillic white as of week end. beautiful black duct taped eyelids. corona control arms. custom double welded rear swaybar. black sprayed trx rims on front with apauling offset. chopped ea pedders falcon springs all round with monroe gas shocks bumpy as. custom strut brace cumstom bucket seat (stock seat with foam chopped out) works well. removed sound deadning. painted rocker cover WOW!! all electrical components replaced. at the moment car is export spec panda matt black and silver horrible paint …

hey hey rolla people's nice to be in the club, as you might know i currently own a AE82 88 corolla seca YAY!! lol, wen i got it it was horrible dirt dust and leaves everywhere, 3 weeks later it looks pearler, i just finished respraying the interior dash and stuff will post some pics of what it currently looks like wen i upload them onto the computer it looks mighty good, i decided on a black silver and red interior so far i have done the black and silver parts next job is the door trims to be fitted with lashes of red pig skin leather or leather lookalike, the car is bright red, any idea's on what sorta shade of red to do the door trims would be helpfull, thanks guys will…

hey guys, I bought this vehicle a while back, then went through 2 gearbox's and a diff and decided i didn't want anything to do with it, so sold it to a friend, he then repaired all the things i had fooked and i bought it back, haha strange i know, but anyway, this is it, all standard bar the stuff i did today, which was lower it and put a set of trx rims on.

1991 CS AE92 rolla engine: 4AF-C exterior: stock, with very little surface rust, and a slightly damaged bonnet interior: aftermarket tacho, clarion head unit with kenwood 6X9s and a clarion 200watt amp and 800watt sub future mods: fix damage and maybe put on some nice mags and exhaust system pics to come soon

Hi all, looking for a car I once owned. I believe it is still around in south east Qld. Anyone know its where abouts?

what ya think?

Hi Guys From KL here This is my ride..an AE101 4 doors 1.6 chassis originally come with 1587cc 4AFE 16V engine Its a 1992 production and i had it for the past 3 years My modding began when the gearbox synchro gave out when i owned it 1st 2 weeks So I decided to transplant a 4AGE 1.6 20 valves engine from 1998 JDM AE111 Levin BZG SS and had been upgrading it ever since This the looks the 1st time Iaid eyes on it

SOLD! Recently purchased a 1984 MK II Toyota Celica Supra. It has a little bit of damage, thanks to a friend reversing into it: Plans: Respray + Restore Engine Conversion Lower Re-trim interior Just pour 80-90% of my earnings into it while I live at home basically. Hahaha. If anyone has any ideas or input as to what else I could do to it feel free to say so. Project wont kick off for a few weeks though, have to save a little bit before I start out. picture of interior and yes. That is a coke bottle holding the handbrake on. the guy I bought the car off lost the button so it doesn't hold itself in place. Hahahaha.

Hey guys just thought i might stop by and show you guys my first 4AGE i have to tell you guys i am a holden owner but after hear my 4age rev out to 7,600 I'm sold i can't wait to sell my Vx and start my Corolla project, it's not this car i plan to fully rebuild a AE86 from the ground up inculding bear metal respray and a 4AGZE, anyway for now the AE82 will do so back to her i got the car off a mate for $900, it was a completly standard car expect for 276 degree cams, it wasn't idleing and was overheating when throttling harder than idle lol i replaced the radiator and took the horrible dayco themostat out and gave it a tune it was nocking badly (while bridged it w…

Name:abah from malaysia, hope to gain more knowledge about #e7# Car:corolla dx 1981 Motor & Driveline:rwd Suspension & Brakes:standard Wheels & Tyres:185/60/13 Interior:stock Body:stock(mustard yellow) Other:jdm muscle car project in progress :yes:

Well, I finally got the Corolla that I wanted! Picked it up last weekend. It's a 79, 4 door, 5 speed. Got some minor rust on the quarter panels but we'll be taking care of that part soon. Right now it's painted flat black cause the guy we got it from has a thing with painting all of his cars flat black. I guess it was a gold color orginally so I might go back to that or paint it blue to match my husband's 2 door 79. Husband's working on it as we speak. Nothing on it, pretty stock, just centerlines at the moment but who knows what else is going to happen to it. Wish me luck!! Any ideas are greatly appreciated!!

Hey, just thought id add up before and after shots of my new (old) bonnet before: after: opinions anyone?? i wanna 2-tone the sides too... (ignore the broken window) cheers, rob p.s. should the front apron be black too??

First rolla, 84 ke70 highroof wagon. picked it up for $500 when i was 15 on the side of the road 5 houses from mine. was stock as rock and in pretty poo condition, faded blue and patches of primer, but did have a webber carby. Plans were to make it a nice cruiser without spending too much dosh. since i have owned it i have taken off the rear bumper, got rid of rust and gave it a $100 paintjob, found some nice wheels CHEAP (wantanabes/superlites), front sway bar and 1.5' lowering blocks from pedders, cut commo springs on the front and thats it. cheap, reliable, pimp cruiser/daily. future plans are to get a 4age, 4k is just not doing it for me anymore... reset…

My girlfriend and I both have wagons. Hers is a gold automatic and I think mine is a sprinter carbi from Canada... Some creative body work. They salt the roads here. Is this a sprinter carbi?

Hi all, I finally got the hilux back on the road but on my first 4wd trip i KILLED two tyres so there goes the money for the 1G for the rolla, have to start saving again but anyways... below is my latest addition to my hilux... and a picture for good luck..

This is the KE25 i bought of Sharpie (Rob) about a week ago.

help can anyone tell me how to remove the panel where the windscreen wipers are so i can clean it out and do some rust repairs

hey everyone! my names Aiden i live in Mawson Lakes, Adelaide and am currently studying year 12 i am very new to the corolla scene, i have found heaps of usefull information on the site good work to all the people on here :hmm: i recently just got a KE70, which i intend on just using as a daily driver, but i am hoping to get another motor just to rebuild seems like a good motor to learn the basics on, i also hope to change the transmission to a manual in the corolla, i also have a Nissan N12 ET, this is semi worked with rebuild, full 2'5, garret t25 turbo and some other mods, here is a few pics i will get some of the ke70 and post up later

i just came across an'81-'82 toyota starlet. i will be buying this for the transmission, then maybe parting it out i will post it up on parts sales once i buy it

Well after months of searching for my first car, i have found it!!! It's a very rusty Corolla Liftback, but I love it with the rust included!!!. It's a great car even if the rust covers all the back part of the car :2thumbs:. You can check the proyect pictures in http://ke70liftback.bravehost.com the page is in spanish i know but soon it will be in english, so don't worry, also the pictures speak for themselves.

Hey guys, Well with my project car I'm at the stage of looking at getting a respray for my ae80 hatch as the stock one is shit! I'm just really after some qoutes really or some info on where to call to get some price's All positive help most welcome!! cheers tory!

This is my daily, its a 1983 ke70, Its got a rust & dent free body, & Has been resprayed in a metallic Green with flake, Its a home job, It isnt the best job but keeps it looking clean. My plans are to tidy it up, Change it from auto to manual, & Later work the 4k. but right now its just a Reliable daily. Although i do have a few plans for it.

sorry mods pleas delete

Hello! I am in a problem with my toyota corolla 1980 (4k Engine ,1290cc) that it consumes a lot of fuel about (9 to 10 km / Liter). Please tell me what is the original main jet size number of carburetor that company fits.? thanks!

hay guys I'm building up a ke70 (daily drifter) and am wondering what kind of suspension setup and brake convo i will need to keep it road legal I'm planing around 150kw at the wheels. from research i have found that RA60 struts bolt in and the brakes are much larger and vented. but with the ke70 lower control arm you end up with a positive camber. now apparently by using a Sigma lower control arm it changes produces a -4 degree camber (is this legal) which should be pretty good. just wanted to know if anyone has performed this conversion before and can confirm it fits well? i don't mind a bit of chopping here and there as I'm a sheety?? any help? cheers

Hey guys and girls i've owned my ke70 for 4 months now and have put some money aside. I want to get a 5k and 5speed cause my car is auto right now :y: how much do you think it would cost to get it converted and is it worth it because i'm a bit stuck right now with my crappy auto and my leak happy engine. Any help would be great and i'd like to get a basic respray while i'm at it so how much roughly do you think it would be worth? Any help would be great thanks. :lolcry:

here is my new ke55 i have put a deposit on and going to pick up this weekend, will get better pics on the weekend when i can take them!

sorry stuffed up

Picked up another rolla last week. 90.000kms, no oil leaks, reco head, new hoses, fairly good bodywork. Stock as, all ihave done is pull all the door moulds of cos it was missing a couple. Got it with rego for 500 bucks, tell me what you thimk and maybe what its worth. Also what i should do with it, i was thinking lower it and put some whitewalls on there. Cheers