Des

You should punch him then when he breaks throw him over the rail on the bridge.

Head gasket blew today so I'm back in the Ke70. 165/70/R13's tyre's on the rear are fun.

Nah that one was flogged out.

Most likely getting a newer car in the coming months so not much will happen with this other than all the motor bits being put away properly. I'm not going to sell it but store it. Might be pimpin the Beauy hoes from a bagged crown soon :D

Agreed.

Blacktop 20v quad throttle bodies are on the way.

Put something else in it. What do you want from a car ?

Welding the planatery gears in the diff together so it spins 2 wheels ALL the time at the same speed. An open center will get your reflex's going in the dry, Just takes more effort to get it side ways.

5K all way if you like K motors.

Whats ya location mate ?

I should be in for this one. Pending what car i take i may be able to offer 2 spare seats.

2 plugs. One on the bottom on the diff and one on the rear plate to fill it up. Hot is better but don't burn yourself and getting the diff oil hot or warm will take some driving.

Dump the diff oil and fill it up till a little bit comes out of the filler hole.

Yeah they still look good, I was expecting scuff marks on the skirts but its clean as. I need to go 20" over sized pistons but i don't know what brand to stick with ?

You can fit an older engine to a newer car BUT it has meet or better the cars emissions.

Got the engine back today. The bores are worn so i will need to go 20 thou over sized pistons. Crank looks good, No scouring at all on the journals just a little but on the rear crank seal surface. Oil pump is also worn but I'm not worried about that as I'm getting higher pressure pump with stronger gears. The pistons look new, Not a single wear mark on them just a few marks from them being chemically cleaned. Mum cracked the shits because i have the Crank, Rods, Pistons, Oil pump and a few other small bits stored in my bedroom and it now smells like CRC, Need to open a window me thinks. 7 rib block Pulleys, Flywheel etc. 42mm crank, Rods, Pistons etc. Bigport 3 rib rods vs smallport 7 rib rods. Pretty clean for used pistons. Just some marks from the chemical cleaner but they wipe off.

New Mustang if I'm not mistaken.

I pick up my engine from road and track tomorrow. I just got them to clean it and measure it up for me as i decided to build it myself seeing as ive got a worked 18RG to build now too :dance: Got a set of 20v factory headers today for my 16v, Will need to be re drilled but I'm cool with that as they should flow a bit more than the factory 16v cast manifold.

Sorry about my phone chucking it in, Next time I'm deffinatly coming rain, Hail or Tabby :dance: I still had a good night though with the girl friend, Yes the dude from Beaudesert has a girl friend and no I'm not related to them.

I was down the coast last night, No one called so i did other "stuff"

Oh he means 1 U Z - F Z E

Looks good with those wheels for some reason, The wheels look shitty on anything else but on that i like.

Stock coolers and sandwich plate = FAIL.

Play with adjustable sway bars and wheel alignment settings too, Makes a huge difference but be careful.