WA / Perth
Western Australia and Perth General Discussion
334 topics in this forum
-
http://www.dpi.wa.gov.au/licensing/myvehic...s/approval.html and http://www.dpi.wa.gov.au/licensing/myvehic...ions/minor.html
-
- 16 replies
- 54.6k views
-
-
Anyway, we've had a few new members lately, so a new roll call was in order. If your in the WA division of Rollaclub, stand up and be counted! Me first baby! Name: Dan Rides: KE20 ex-racer, KE55 coupe (new racer), KE55 sedan, '75 merc. Occupation: School MSN: [email protected] Stand up and be counted boys! Cheers, Dan.
-
- 150 replies
- 162.1k views
-
-
Okay, I have been searching non-stop to find someone to do rust repairs on my KE55. I have been looking at many different panel beaters/painters etc. only to be disappointed with them saying that they only do insurance work. Is there anyone here that can do rust repairs on it for decent money? I am expecting up to about $5k and I'm sure some panels will need to be replaced, I have a mate that is on standby to paint her up, I just need someone to get rid of the rust. NOR or SOR don't really care as long as they are good and decent priced. Any help would be appreciated. Cheers. -Andrew
-
- 7 replies
- 46.7k views
-
-
-
Went to the Como car show run by rotary on the weekend hoping to see a certain KE10, but unfortunately the only Jap cars there were a 280Z (which doesn't count), and a Mark II Corona with the bonnet down. Why take your car to a car show if you are going to leave the bonnet down? And who wants to look at a Tesla? Some nice Renault 4's with engine covers up, and some nice RT chargers, again bonnet down! And bull creek aircraft museum, what an absolute highlight!
-
- 0 replies
- 859 views
-
-
Looking for someone who knows their way around a ke55. Need to get it back on the road and over the pits and the 5K is running rough as guts atm! can anyone recommend someone who wont charge me an arm and a leg ? cheers guys
-
- 4 replies
- 86.6k views
- 1 follower
-
-
Hey Rollaclubers, The WA forum has been dead for a while now. Its time to get the club going again me thinks. I am looking for interest in a gathering of either. 1) Weekend cruise down to margaret river. This would be down through the bendy roadsin waroona, staying the night in margaret river for some nice food and beverages with good people. Plus some pretty sweet photo locations. Organising a camp site for the club to stay. 2) Single day cruise and bbq. Looking at a single day cruise with a bbq for lunch in the middle. Looking at running the event in the second half of April depending on people preferances. This would be a good opportunity for everyone t…
-
- 32 replies
- 180.1k views
-
-
-
The mid year Mcrae Rally Sprint is being held in conjunction with the Targa West test day on the 20th July. Location is Perth Motorplex, check out the Targa West or Mcrae Rally Sprint websites for details. The same course is being used for both events, there are heaps of things scheduled for the day, state Motorkhana round is on, as well as Polaris rides and heaps of other motorsport activities. Sounds like a great day of fuel powered fun. I will be running in my corolla, so come down and say g'day.
-
- 8 replies
- 234.6k views
-
-
Howdy fellow WA Rollaclubbers. I'm trying to get 67Rolla ready for the cruise this weekend and I need a KE10 parcel shelf to use as a template. I've been trying to mark it out with cardboard but struggling because it's hard to get to with windows and hood lining (mine goes all the way to the parcel shelf) fitted. message me on here, reply or text me if you are able to help. mob: zero four 24 517 735 Cheers, Ken
-
- 2 replies
- 152.3k views
-
-
Hey guys my daily ke55 has always has a noisy 4k since I purchased it, but is getyin progressively worse. Since I drive the car to work I don't have the time to rebuild my current motor. Does anyone have a good condition 4k I could purchase/ drop straight in? Cheers ben
-
- 2 replies
- 113.4k views
-
-
Hey people, Things have been dead here lately, if you want something to do tonight. The third round of the Mcrae rally sprint is on this evening at the Motorplex. Entry is free for spectators, starts at 5:30 pm, huge variety of cars, I will be running in my rolla. Come down and say g'day and get your fix of motorsport.
-
- 9 replies
- 57.5k views
-
-
Hi guys, Heading up to Barbagallo with the Triumph Sports Owners club, they have booked the track for tomorrow evening. (Sat 1st march) If any one wants to come and check it out, feel free to come say g'day. We start racing at 4:30/5:00 pm.
-
- 0 replies
- 48.5k views
-
-
Japanese Nostalgia's 4th Cruise/Meet Event https://www.facebook...64049053742280/ Whats Invited - All makes and models of Japanese cars/bikes welcome - Any style ( Vintage/Classic , Drift , Bozu , V.I.P, etc ) - 25+ Years Old. The model/chassis of your car must of been in production from factory before 1988 , Example : 1992 Toyota Supra Ga70 is accepted because it was in production from 1986-1993 All cars participating in this event must meet the above requirements. Will make some exceptions on certain models BUT DROP ME A MESSAGE TO DISCUSS. The Good -We recommend you get to the first meet point around 10am as the first meeting point will be the longest …
-
- 3 replies
- 43.6k views
-
-
Alright Perth RollaClub we need a better show up of Cars, Toyotas in the park was great yesterday, but I reckon we should get together more often and on the entry form for titp next year have that we represent RollaClub WA. How about we drag the cars out for a Car Cruise? http://www.gumtree.com.au/s-ad/scarborough/activities-hobbies/oldschool-jap-cruise-03-11-13/1028596635 Meet at Scarborough Beach Car Park at 10:30 on November 3rd. Hope to see you guys all there. Perhaps we could get some stickers or something made up so we actually look like a group aha
-
- 5 replies
- 64.9k views
-
-
Who's going to Toyotas in the park this year? http://www.teccwa.com/entry
-
- 6 replies
- 47k views
-
-
So i will be looking at getting my car registered ie over the pits. How picky are they about older cars? Anyone had a pre 80 go over lately? Basically its a new braking system, all mechanic parts under car etc etc. But the interior is pretty shabby. Do they care if things like the seats are all split? Nothing safety related is damaged eg seatbelts. Thanks!
-
- 1 reply
- 33.7k views
-
-
Hey guys, wondering if anyone here in Perth could recommend a workshop/themselves/mate who can lighten a standard 4k flywheel for me at a reasonable price, no one ever seems to get back to me with a quote...
-
- 6 replies
- 51.2k views
-
-
TECCWA is holding a dyno day this Sunday (22nd) at C-Red! 10am - 5pm, costs are $40 for members, $50 for non members, and you will get two dyno runs. Spots are only secured once payment is made. Any cars are welcome, Japanese or otherwise. For more information, or to register your interest head over to the TECCWA facebook page, or website. TECCWA website event information: http://www.teccwa.com/news/teccwadynoday-sept22nd Facebook event information: https://www.facebook.com/events/453753541390377/
-
- 0 replies
- 35.6k views
-
-
-
hey guys well i found someone with a kp61 starlet and had a look at it today, this thing is pretty cool only thing is abit of rust and no dash. he also had like a garage full of k seried parts such as diffs, centres, gboxes, struts and shocks and the rest, he also had a build 4k that ran 2 events and is in top condition and a whole lot of wheels. so the starlet i call dibbs but if you ned anything just shoot me a pm or for those who have my number give me a call and i can grab more pics or info on request. i also went to jandacot wreckers and found a clean ke20 73 model 3k,2spd bamboo and pretty clean they said $700 but i recon they would go to <400 ish. …
-
- 19 replies
- 48.1k views
- 1 follower
-
-
-
Last year saw over 110 quality Toyota's on show, this year we hope its bigger and better! BE THERE!! FREE ENTRY!! (no excuses) http://www.teccwa.com/entry.html
-
- 5 replies
- 27.4k views
-
-
-
-
it's that time of year again, Bikini car wash Time!!!!!! Where: Commercial Tavern Midland - 70 Railway Parade, Midland When: Sunday 14th October Time: 10am - 4pm Fundraising for Juvenile Diabetes. ALL proceeds go to JDRF (www.JDRF.org.au) ***HOT CHICKS IN BIKINIS!!!*** **Sausage Sizzle & Drinks** **Rowdy Promo Girls** **DJ** **Show N Shine** **Photographers** Come and Show your support for this Charity event!!! :) Link to FB Event: https://www.facebook.com/events/442700492435290/
-
- 1 reply
- 26.4k views
-
-
hey everyone (first post ever) driving around West Leederville this morning and noticed a yellow wagon with cherry blossom wheels abandoned with a big 'vehicle reported' sticker on it. it looked sweet except the rear tyre was hanging of it. I can't remember if there was license plates on it. I hope it wasn't stolen and the owner knows its there? thought I would post it up.
-
- 0 replies
- 25.9k views
-
-
i'm interested in having a motor rebuilt, anyone got any recomendations? there was a guy who used to advertise in the quokka 3/4k rebuilds for 500 bucks. does anyone have his details by any chance? any experiences, thoughts etc, post em up
-
- 7 replies
- 27.7k views
-
-
Hi does anyone have or know where i could get a igniter for my 4age project. It is for a Bluetop Big port with the green 4 pin plug harness as in the photo. Also can someone help me out in letting me know where the black 2 pin plug goes in the photo. Both pins have ignition power one yellow other red and black wire Cheers..
-
- 2 replies
- 28.9k views
-
-
Meeting at Cockburn Gateway shopping center 12pm this Sunday. See this link for more details :)
-
- 0 replies
- 25.1k views
-
-
Building A community where Japanese automotive nostalgia (Pre 87') of Western Australia can meet up for shows and cruises. - All makes and models of Japanese cars/bikes - Any style of cars/bikes - 25+ Years Old (Pre 1987) Organising A event in the next coming weeks. Spread the word please. http://www.facebook....ostalgiaWa/info
-
- 9 replies
- 24.3k views
-
-
Hey. My friends White jzz30 soarer, wald body kit, 19" wheels, 1DMB 423, stolen last night from morley/lockridge area. If anyone has any information please contact rowan 0404756446
-
- 2 replies
- 20.3k views
-
-
Here goes... About 3 weeks ago I got flashed by a fixed red light/speed camera. I was going through a green light at the time, and I estimate that I was doing about 40kph over the limit. As I haven t recieved a fine or anything yet, its been suggested that the reason its taking so long to get to me is that the police will be writing up a summons to court, recieve a $1500 fine, and have my licence suspended for 6 months. Can anybody shed some light on this? I'm struggling to find information about it anywhere, and I'm trying to be prepared in case the worst happens, so I can try to keep my job. Any helpful input is appreciated :) Cam.
-
- 8 replies
- 61.1k views
-
-
as above i need the drivers side window regulator and handle for an ae82 4age corolla I'm not sure which types are interchangable pm me if you have anything thanks Marti
-
- 1 reply
- 19k views
-
-
Hey guys Starting up a new workshop with my mate,offering -Sandblasting/Sodablasting, -Restoration work, -Spray painting, -Window tinting, -Mags & tyre combos, -Wheel alignments, -Exhaust work, -Spray chroming,that is paint quality but can spray over metals,wood,carpets,vinyls,plastic...you name it and we can chrome it,not as expensive as chrome dipping, both my mate and myself are trade cert in spray painting,his brother is trade cert in panel beating,all gst rego or can do cash deals,also have a car trailer to move cars between places,offering rollaclub members club discounts to start off with but we are getting really busy so get in while you can Ha…
-
- 3 replies
- 22.2k views
-
-
Howdy all. Someone I work with is chasing a guard roller, does anyone have one?? Cheers :)
-
- 0 replies
- 19.3k views
-
-
Hi guys, I'm about to get my new front fence and the front of my house rendered and was wondering if anyone on here works for a rendering mob or can recommend someone. I'm looking to get the fancy Acrylic texture stuff that has the colour mixed in the render as apposed to painting over render. Also, I'm not after cheap, I'm after the best... at a good price :)
-
- 0 replies
- 21.4k views
-
-
Does anyone have t18drifts number? I've got cash waiting for him, but he hasn't replied to his PMs. Can someone tell him for me? Cheers
-
- 2 replies
- 20.6k views
-
-
Hi All, If anybody is interested, there will be a rally in Jarrahdale on November 12, I will have my 2T powered ke20 out there, other cars such as a 2tg ke25, 2tg ke30, at least one sprinter and possibly a couple of other corollas (as well as datsuns, escorts, charades etc). Cars will be at the service park from about 930am, and racing starts at around 1200. There is no entry fee for the service park, and a free spectator point is available to the general public. More info available here: http://www.rallywa.com/index.php?option=com_content&view=article&catid=27&id=22
-
- 8 replies
- 23.9k views
-
-
Hi All, Time to go racing again, this one is held in Donnelly about 3.5 hrs south of Perth if anyone is interested. The racing starts from 1315 and will go into the night, this time there will be more cars including WRX's, Evos, and a whole range of other cars including the usual array of corollas ranging from my KE20 right through to a some nifty FWD rollas. More info here: http://www.rallywa.c...=103&Itemid=187 And a google map link: http://maps.google.c...&mra=ls&t=m&z=8 If anybody would like to get hands on, the club is always looking for officals, and if anyone would like to get their hands dirty, we are looking for service cre…
-
- 0 replies
- 21.7k views
-