-
Posts
5784 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Teddy
-
Shot from under the barch, new seal in place. Note the lack of oil. Close up My cars clean.. Yup, back up on stands, Again. Close up of the hell pipes and things going on near the steering shaft. Spot 3 things about this pic that are.. not quite right :dance: Re-alignment of twinheadligh frames is required. Hey Nick - its my inner guard, is it big enough for you? Also, i do believe you want a hairy nipple technology? oh yeah baby, i feel happy now :POSTPICS!:
-
Cory The Party Boy Is In The Big B House
Teddy replied to towe001's topic in Rollaclub Social (Off-Topic)
they have a 17 yr old kid in there, only because of his past. Sure thats a good way to attract people to the show to make them money, but what sort of image is it portraying? -
In Red - Done In Orange - Doing Today In Black - Left To Do. 1° - Modify and install the remanding inner guard clips, for the front wheels 2° - Tighten the fuel breather line for the filler neck on the tank end (need Smalllllll screwdriver or 1/4 inch tool(s)) 3° - Install the rear inner guard plastics 4° - Re-seal rear talights, lense glue has dried up and cracked as its been there so long 5° - Finish installing boot wiring solder joints and affixing it to roof of boot 6° - Find road worthy tyre / rim setup, find tyre brace & wheel jack. Install 7° - dillevery of overrated grandma door trims to trimmer to finish of my door trims! (doing tomorrow arvo) 8° - Rust proof inside front doors 9° - install door trims & relating on doors 10° - Fiberglass top steering wheel cover and install security light 11° - Replace gearstick bushes (on end of gearstick & in housing) 12° - Install lower steering wheel cover, dash face panel on right, Boss kit and Steering wheel. 13° - Install instrument cluster (stock for now) and surround. 14° - Replace Tailshaft output seal on gearbox, fill up with oil 15° - Finish attaching breather line under car for carbon canister 16° - Install radiator fan & get shroud made, install fan temp on control unit. Put Foam on - Fabricate mounts for foam to sit on. 17° - Put new tyres on rims and install 18° - install parker & indicator lenses again :cool: 19° - purchase and install new oil cap for rocKET covers. ;) 20° - Install under tray under sump 21° - Cut carpet underlay from clutch pedal area and adjust free-play, again as required 22° - Re-install timing belt cover and fan belt. Get tony to listen to motor rattle 23° - Find and install blower controle bulb, install cover over that. 24° - lower vehicle to ground, and with some load, tighten rear diff bushes 25° - Lights Test & install numberplates 26° - Final vehicle Check over, I'm sure theres something small ive missed. 27° - D O N E - F O R - R O A D W O R T H Y - A N D - M O D P L A T E ! ! ! ! ! ! !
-
I Play the piano. I stopped the exams at grade 5, when i was in grade 5. lol. I compose music, and love the odd tinkle on the keys now n again.
-
3KR would give it a run :rocknroll: Hahha mate that is off-tap hey..
-
Lovin the mirrors :lolcry: Looks like its full of little surprises, like most cars this age. Never the less, I'm liking the progress !
-
Ok, Will add pics later on, camera is currently out of my reach, and my romp aint movin untill dinner time :wink: 6 of the items on that list were completed, So not that big a weekend, but still made some good ground. Next weekend will be alot larger.. No family events to tend to. Saturday arrival will be early, and departure quite late. :lolcry:
-
The 1 piece in my opinion shites over a 2 piece. Less moving parts, less chance of vibrations, less joints to flog out, less moving parts, Easier to work on :lolcry: Ask Tony (TRD) on here about his experiences using the 'single' shaft :wink:
-
Raven's Ke25 Corolla Memorial Rebuild - Now Parting Out
Teddy replied to Raven's topic in Rollaclub Rides
Mmm quite Nice my mexican friend :lolcry: ! -
^^ barch, i was in the mood to write something of that depth for once :yes: Good Reply, Its smack bang on the money.
-
Yeah, I'm not 21. I feel about 1/2 that age at the best of times, hahah. Should be quite a good weekend :y: John should have my dori-dori trims ready next week, if all goes well. The Order of what i will be doing on the weekend. I am hoping to get through atleast 3/4 of that list. Pictures will be proof of work :yes: 5° - Finish installing boot wiring solder joints and affixing it to roof of boot 6° - Find road worthy tyre / rim setup, find tyre brace & wheel jack. Install 21° - Cut carpet underlay from clutch pedal area and adjust free-play, again as required 10° - Fiberglass top steering wheel cover and install security light 23° - Find and install blower controle bulb, install its cover over 12° - Install lower steering wheel cover, dash face panel on right, Boss kit and Steering wheel. 13° - Install instrument cluster (stock for now) and surround. 11° - Replace gearstick bushes (on end of gearstick & in housing) 15° - Finish attaching breather line under car for carbon canister 20° - Install under tray under sump 18° - install indicator lenses again 19° - purchase and install new oil cap for rocKET covers. 2° - Tighten the fuel breather line for the filler neck on the tank end (need Smalllllll screwdriver or 1/4 inch tool(s)) 3° - Install the rear inner guard plastics 8° - Rust proof inside front doors 14° - Replace Tailshaft output seal on gearbox, fill up with oil If i can get through most of this, thats 1/2 the list completed :) Ted
-
Hell Yeah Jar, some nniiiiiiiice pics there ! How is your beast commin along these days? Still got the glow'n'slow exhaust manifold ? :dance:
-
Des, your sister can still be a relation to you BEFORE you marry her :dance: hahah thats cool :jamie:
-
lol, ill never look at my self the same :dance: I need a haircut Soooo desperately. its on the to do list this week ! Today, i finalized a few rough edges and listed down the final 28 things that blue car needs before rego. in no order. 1° - Modify and install the remanding inner guard clips, for the front wheels 2° - Tighten the fuel breather line for the filler neck on the tank end (need Smalllllll screwdriver or 1/4 inch tool(s)) 3° - Install the rear inner guard plastics 4° - Re-seal rear talights, lense glue has dried up and cracked as its been there so long 5° - Finish installing boot wiring solder joints and affixing it to roof of boot 6° - Find road worthy tyre / rim setup, find tyre brace & wheel jack. Install 7° - dillevery of overrated grandma door trims to trimmer to finish of my door trims! (doing tomorrow arvo) 8° - Rust proof inside front doors 9° - install door trims & relating on doors 10° - Fiberglass top steering wheel cover and install security light 11° - Replace gearstick bushes (on end of gearstick & in housing) 12° - Install lower steering wheel cover, dash face panel on right, Boss kit and Steering wheel. 13° - Install instrument cluster (stock for now) and surround. 14° - Replace Tailshaft output seal on gearbox, fill up with oil 15° - Finish attaching breather line under car for carbon canister 16° - Install radiator fan & get shroud made, install fan temp on control unit. Put Foam on. 17° - Put new tyres on rims and install 18° - install parker & indicator lenses again :jamie: 19° - purchase and install new oil cap for rocKET covers. :) 20° - Install under tray under sump 21° - Cut carpet underlay from clutch pedal area and adjust free-play, again as required 22° - Re-install timing belt cover and fan belt. Get tony to listen to motor rattle 23° - Find and install blower controle bulb, install cover over that & interiour now complete for road worthy. 24° - lower vehicle to ground, and with some load, tighten rear diff bushes 25° - Lights Test & install numberplates 26° - Final vehicle Check over, I'm sure theres something small ive missed. 27° - D O N E - F O R - R O A D W O R T H Y - A N D - M O D P L A T E ! ! ! ! ! ! ! So, even though i have been saying its going to be done soon for the last how many years, as you can see the list is really not that large any more. :P $.02
-
The bus in the backround, because its not pulling a line lockie.
-
So, do you want a personal invitation by the queen next time ? haha From now on, Des & Corolla girl + family will automatically be assumed not to be coming, unless they physically turn up. :dance: Situation for example!. 10 people say they're coming. Des and corolla girl + family also say they are turning up. Table for 10 will be booked :jamie: lol... That Ford truck was masssssssssssive. Not sure if i would go to that hogs again.. Sooo long for food, and to be quite honest, i wasnt_that_ impressed with the food. Either way, the atmosphere with you guys was awesome.
-
Thanks for coming all, Was a good evening. A little dysfunctional with traffic, fire services, escalators and meal waiting times, otherwise it was nice to see you guys.
-
nice :( Cya's in 1 hour !
-
working on blue car,. computer with wirless in the thread :( will check this every 10 mins before we leave to get back to brisbane. currently 4:15. Thqanks for all the sms's guys :o