Rollaclub Rides

putting these webers on the ute next week along with a worked 4k alloy head which has been ported/polished/flowed and cc,s, followed by a 40/80 cam.... hopefully this will make a lot of difference see pics before you all ask the question "YES" it is a toyota (toyota publica) with 4k engine and 4 speed box (also comes with 5 speed)

Here are a few shots sorry if they are blurry my camera sucks. Enjoy First Few is taken at Trenton Thunder Baseball Feild the others were taken at my local Toyota Dealership. And a short Video of my car.

hiya boyz and girlz, i was looking though the quokka the other day a found the engine 4age rebuild only 11 months ago, nice. but it had one draw back, it was in a lic and driveable seca. My wife drove it and to cut a long story short, it is hers now and I don't have an engine. :lolcry: here are some pics the exhuast system is a little to RICEY for me but she likes it, 3" all the way. too much fart noise, but it goes hard. but hey it's a rolla feel free to slag it off, I do Chris

This has been my baby for 5 years. 100k on it so far and there's an engine light that just won't turn off. I treat her rough through the roads, all the swirvy turns in Mountainy PA have a lot of 'fun' potential for me. I don't drive reckless where anyone else would be able to get hurt though, and I do abide by the speed limit (5-10 over at most) and a clean driving record shows this. Anyways. Here's my corolla, Figure I'd join a club where I had the car. /cheers

Name: Anthony Car: 69 KE10 Motor & Driveline: 4k, 2 speed toyoglide :) stock motor stock exhaust - look to upgrade shortly stock carby Suspension & Brakes: Currently drums all round. Should have parts to do ke20 front disc conversion shortly Wheels & Tyres: Stock. Hubcaps n'all Interior: Stock black Body: good condition minus small dent around tail light. Some small rust. Once I have sorted the mechanicals out its gonna be completly taken back to bear metal. Other: There is no other! Thought it would be cool to get some pictures before I had to turn in the Tassie plates.

I just bought a rusty '76 B210 (120Y) Notchback for $50usd. It actually has less than 100,000mi on it and there was nothing wrong with it when parked. pics next week

ok guys ill get some pics up soon, but my uncle gave me a 1980 4 door ke 55 for chirstmas it is faded red (custom lol) has it's fair share of cancer and dents (nothing irrepareble but) everything is stock as at the moment.. i was just up for some ideas, i have a spare FWD smallport 4age that i was gonna put in it, and i just want some recommendations for waht dif i should use, and waht brakes i should use both front and rear, keep in mind this is not going to be worked jus thte stock 4age in there... so waht should i use?? i was gonna flipp the rear leaf springs, but what drum brakes can i use that will be efficent???or what else can i do for the rear?? front …

hey guys i recently brought about a month ago a white ke15 sprinter ke15 sprinter for a new project car. this thing was pretty much stock with a burnt out interior and that someone had jsut lowered. ive now just raised it up and just wondering how much one of these things is worth as I'm might be going an engine conversion. the only rust on it is a tiny hole in the firewall and i a hole in the top left guard the size of a pin hole. other than that its just surface which is getting fixed now. also in a couple of months once registered and its grown on me a bit more ill be putting a 4g63 engine which my mate is giving me for nothing with a turbo setup just becuase he wants …

hey guys i got given a 1980 KE55 for xmas, needs a little TLC, but I'm already sanding it back to get sprayed in red, then I'm looking at putting all the dash and interior back together (NIGHTMARE) i need some help with wiring on that issue lol... pics will be up when i take some lol...so ill probs be using the search button quite a bit and asking plenty of questions.... thanks guys ill get some more pics up ASAP.. needs a little bit of work as i said but I'm tkaing it slow, doing the exterior first then the interior, then ill decide what to do engine wise...

As you might have guessed from the title I have another AE71 now. For those who don't know, deemed my other AE71 too rusty to be worthwhile registering, you can find it here: http://www.rollaclub.com/board/index.php?showtopic=17235 I bought my new one about a week ago now. Its very similar to my other one (another AE71 duh) but its got a few differences. 1. Its auto :hmm: 2. Its slightly a different color silver-green as opposed to silver on the other. 3. Its only done 158,000k's. 4. Its currently registered until June. 5. Windows are tinted. Most importantly though, its got A LOT less rust. Now for some photos, these were taken on the day I went to see it:…

Yo starting to get my shit together with my rolla. Its a first time re-build for me so bere with me. I am thinking 4age or rotor. Any suggestions would be a help. James heres a few pics of the car as i got it and progress of the body work

here is my new ke55 i have put a deposit on and going to pick up this weekend, will get better pics on the weekend when i can take them!

Got me a poo-brown AE71. Story goes my mate Jonezee bought this off a Granny, got it defected, got lazy and sold it to me for $500 all canaried. Took a weeks worth of bringing it up to regency spec and it passed first shot, HYPED! All outta rego, I took it home, put it on jack stands and spent some money on it... Don't you just love the stock height... :teehee: So now, I await some parts and cash flow for rego but when everything comes together the spec list shall read: ## = On its way! Front End: - AE86 Struts - Cusco Strut Brace - KYB Excel G shocks - Rona XT130 LCA's - AE86 PS Arms - 7kg Springs ## - 40mm RCA's Back End: - KYB …

What would you do with it?? I do not want to swap engines etc.........Its still for sale but if it doesnt sell soon I want to do it up. I am thinking of lowering it and put bigger wheels on it. What wheel might fit? With white walls of course. I love them!! I do not want to change to much as it is quite a rare car and I hate F&*%$ cars. I am thinking of putting a peroid right roof rack on top with an old long board or so Give me some ideas please............... Cheers Marjanne

Just looking for a outside opinion of my Corolla?

Hey guys, Well here is my current headache. Just installing the motor now. Already installed the rear end of an ae86, tranny, front and rear susp. I know the car is all dirty and nasty right now. But the plan is to get the car running right, then tear it back down again, detail all the parts and repaint the whole shell. Then put it back together again. Wish me luck coz my head already hurts LOL. Nino

This is my new AE71 1600 manuel i just bought it from melbourne bid off a mission but i was looking for sumthin like this for ages its only got 102,000ks original with logbooks and not even a dot off rust plans are 4agze motor going in next month if everything goes well

Hey everyone These are just a few pics of my ke20 i have just perchased. I bought it of an old lady who has owned it since brand new ( 34 years ). It has done 76,000 original miles and has been garaged and serviced regulary its whole life. My view is to lower it quite a bit and put white wall tyres on it, while keeping the standard hub caps. Please comment if you like. Will post more pictures soon

Thought it was about time i intro'd myself Anyway, I'm trung and from Melbourne S.E suburbs. Nick is dorifto because i do alot of r/c drifting and the likes for the RCD1 club. Moving on... Pics Specs: 1.6L twin cam carby <-yes lol (48.8kw@wheels stock rofl) Suspension Replacement shocks and lowered springs 3 point SX front strut brace rear Whiteline swaybar Brakes RDA slotted rotors Castrol DOT 4 fluid Bendix pads Replacement calipers painted Gold Wheels/Tyres Tom's Racing 15 x 7 wheels Bridgestone Potenza RE001's Visionworks lightweight lugs Interior Custom short shifter with shifter bearings and TRD g/knob Persona…

1982 Toyota Rolla KE70 Sedan Motor & Driveline: Standard 4k, 4 speed, 4" Dumpy Suspension & Brakes: High temp Pads, Cobra Lowering springs in rear, Short Shocks Wheels & Tyres: RX7 Series2 13" Polished rims, Wanting sum spitties Interior: Factory for now :sob: Body: Two Tone Matt Black and Red, untill i find a nice candy colour Other: bog here and there, will be tidyied

Hi this is my AE82. stock in the engine at the moment, do have a turbo kit for it. I have 17" wheels on it. super low kings in the front and stock in the rear all with new struts the inside is fully decked out with a sound system. it is at a 144.8Db and still going.

phat or what good old photo shop hahaha

bought a kouki ke70, my zenki one has become a donor atm thought this one deserved its own topic busy swapping parts atm, this is the first old corolla that i have found that didnt snap any of the 3 bolts connecting the inlet manifold to the exhaust manifold 101***km on the clock

these are the new rims for it. front rear and the side i brought it of my cousin for 1000 with rwc and rego..yeah

Hey guys, this has been my first project car for the good part of a year. Its a 82 Ke70 Wagon (almost)running a 4age Blacktop. Have a look and tell me what u think. I was planning on later supercharging it but have been told that doing so would turn the engine into a ticking time bomb :y: p.s i haven't started work on the exterior yet :dance:

hey guys i m new to this web site just regested. I have a Blue/Purple Corolla is a late 99 modle. last year had unfortunate accdient involving a Guard rail in a national park i have just recently got my car all fixed up and back on the road after much suffering driving a smashed up car. People say to me why did i buy a rolla for and not a commodore and i don't know an answer but just a rolla is really easy to do up and there cheap parts you can get for them. but any ways i have painted some interiour parts and put in my own sound systerm and it sounds awsome sony headunit , JBL 5 1/4" in the back, Precision 6" splits, Precision 720watt 4 channel amp and son…

Few videos from the first track day for the car after months waiting for a custom clutch to arrive,its here and it works real good. Also fitted a whieline swaybar which works good on the track also. Anyway few vids to watch,the first one the car stopped due to a loose connection on the fuel pump relay :locked: MAtt

Name: Nick Motor & Driveline:4age16v (still in pieces) delco ecu , quad throttle bodies Suspension & Brakes: stock atm after info on coil overs and what people have done so pm me plz :lolcry:

This I hope will tell the story of an unloved KE30 who rises from the weeds to become a successful track-day car. As the title reads the budget is just $500usd so there won't be any big boost turbo twincam swaps. I plan to use this car for solo racing so high HP is not that important. I found this little car languishing in disrepair under a sticker bush. Fiddling with the carby I managed to get her moving and away from the bush. Surprisingly there was little rot but plenty of surface rust and the frame rails were solid. Anyway the pics. This is how I found her (try not to cry) the air cleaner was on the pass floor. I will post more pics as she pro…

This was my first corolla several years ago, did some silly 'mods' to it when I was younger and before fast and furious came out! all classed as rice now :) Lowered all round with a JDM!!!! 4ac It has now been retired and sitting in the driveway, recently joined with this one, looking to use some parts from the red one to get it ready for rego: All stock with 4ac Added this last week, hoping to get rego on it within the month and retire the Magna: All stock with 4age. Sold this a while back: This has been my long time project just to get back to stock for rego: spends months/years just sitting around untouched: Thats how…

alright just swapped my onevia for this. needs some work drives fine. its a toyota crown and has a 7mge which is running great after a service lols rolling on 19x8 up front 19x9 in rear and has airbag controller its fun lol things I'm doing before on road- 7mge freshen up new headgasket,filters,oils not that it needs it airbag fixed been droppen in getting both rears done at same time kit it or std bumpers and painted to match have paint with car lol so far fully stripped interior for a clean and gave it a twice over to check everything. interior is back in a look smells good :bash: sterio wires run future plans- 1 or 2j it repaint and vip k…

"Betty":1973 Datsun 1200 B110 Coupe, runs a std(ex120y) A12 motor with extractors, std 4spd man trans, H150 3.7:1 diff on 13x5.5 Enkei Limited Comp Sport rims. 165/75r13 Front, 185/70r13 Rear. New motor(ex original) currently being rebuilt to A12GX spec. One owner car all matching numbers on original plates. (My wife hates it!)

hey guys it a 84 ke70 rolla . 4 speed man ford sprins in the back and chopped front sprins . no back seats their is a fire wall insted . car will be getting a roll cage and fixed bucket seat . and one day a 4agze or some thing . car is going mazda rx7 blue . plz let me no what u think off my rolla so fare .all the sound mating has been removed . will keep pics up to date

So i thought id put up a few diff links to some of my previous toys i had back in NZ. This was my pride an joy for a while. 78 KE35 SR coupe paneled + painted in Stary Mica Blue (RX8 Mazda) Lowered all round cresida 10" vented disc /strut setup camber plates rebuilt rear suspension all new rubber seals/chrome on the car 17" Lenso RS5's Integra front + rear seats retrimed interior in black vinal 20v 4age turbo RWD fully rebuilt with 4agze oversized pistons 4agze rods polished/balanced crank skimed/polished block/bores head fully rebuilt with new everything ARP bolts threw out new oil/water pumps rebuilt/polished quad throttles polished alterna…

my rusty t18 got it for $200 started cutting the rust out :y:

hey all just picked up my ae92 supercharged levin (1 of 7 in sa) payed 3k for the beast and she goes like new 177 kms on the clock and in really good condition ill put some photos up this arvo. cheers matt

hey all. as a few of you know i traded my little subaru sherpa to benzo on here for his red ke70 wagon, i loved the look of it, low top slant face just what i was after. drove the wagz round for a bit noticing it was missing a bit, so i tuned it up went round driving it having some fun etc when i looked at bonnet while driving one day i saw stuff coming from under bonnet and i thought smoke, so i pulled over, turns out it was steam, long story short blew headgasket cracked head and cracked bottom end in the 4k. finally made it to my uncles place where i could keep it till i got the new motor and installed it. next day went and got a fully rebuilt 4k motor jammed it in the…

Hi all, I've been trolling around on here for a while now and rarely posted. I thought I'd take the opportunity to throw my hat in the ring and say G'day. I've been the owner of this 1986 CSX Seca for over 7 years now and it's seen a lot of great days and some pretty ordinary days. Bought it for $1800 and have been tinkering with it ever since. It's had a replacement motor put in it after a month of eating 20W/50 and then 3 years later a head rebuild with all new gaskets and belts. Most of the work that gets done to it is by me. Apart from the colour, the dents, scratches, little bit of rust, and days of outright painfulness I do love it and look after it. I'm run…

Just thought I would intro the Family. The youngest 2008 Aurion Sportivo SX6 The 80mod T18 you've meet, getting ready for paint this week and then for sale. The newest addition 79mod KE38 Wagon one owner deceased estate. 97000 klms all service books upto date. $1200. This little KE 38 is a ripper should be registered by Friday. Nothing to do to it. Even the original radio and tape deck still work fine. A wash and polish wouldn't go a stray though. The collection is growing! Loosing the roo bar!