Taz_Rx

This is why he's asking..... http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=290262524384 Can 1 set of bearing fit all 3 motors!? :dance:

The needles can actually slip on the shaft, remove the platics dome cover and see if you can't push it back up to 0. I've had to do this befor too. :dance:

Looks like we're definately doing it.....just a matter of weather now! :dance:

Only about 14psi at the mo cause of my ceramic wheel. I'm not the only one to have done it mate. Madrolla68 also has and he's put over 23psi into one so far. I've also ran over 20psi on a stock standard 4k!!! The lower compression makes it very responsive low down in the revs, NA it'd be very sluggish in the top end.....obviously!

Expect about $600-700 for a one off set. :dance:

Yeah.....I don't know how those ebay bearings can fit 3k, 4k and 5k!? :dance:

Yep, thats exactly what I have done with my boosted motor. 3kbp head on a 5k and CR is done around 8:1 now. 3k has a smaller combustion chamber than a 4k, so a 4k head would lower it even more, but not too much more. :dance:

I know this might sound strange, but put over half a tank of petrol in and then try! :dance:

RCA's?

Got dish?....... Not my wheels, they're Daim's. Just checking what offset I need to fill the guards. These are probably a bit over -20 with the centres put on the other side of the band. :dance:

Its got a little keyway on it. Make sure its actually going into the keyway reciever in the cluster.

Correct. Yep, all of last years season (half of it hasn't air here yet), and all of this years season that has so far aired in the UK!! Will that do!!!? :dance:

If you can get it out far enough that you can see that back of it you'll be able to see how the speedo cable 'clips' in. :dance:

Shanks, thread can now be deleted. :dance:

HOLY SHIT!!! what is the minimum thickness supposed to be!? Must be lucky the pistons didn't pop out!!!! :dance: You should put it on a record player too and see if it plays a nice tune!!! :yes:

stick your hand in behind the dash cluster, and unplug 2x rounds plugs and unclick the speedo drive. You can get the cluster out a bit further to do this by unclipping the speedo cable in the engine bay and pushing it in towards the dash through the fire wall. The plugs should have enough slack on them. :dance:

Hey guys, I'm currently revising some of the info in the FAQ in regards to the K-T50 gearbox options. All I want to know is: Does a T18 T50 gearbox have a 20 spline output like a TA22, or a 22 spline like an AE71/AE86???? Would like an answer asap so I can include it! :dance: Cheers, Si.

You been in Jail or something Casey?.....oh thats right, you had a missus!! :y: Should've know you'd be there with bells on Ben, think you one of the few people who can rival me for top gear random facts and figures! :o

That old hilux now takes prde of place on a stand in the studio. You can see it in the background in later episodes. :y:

The stocko nikki 4 barrels are the greatest. IDA for the win!!! :o Can't beat the induction noise either, mine sounds like a snorting pig!! :y:

Just had the idea of having a top gear party next week while writing this thread..... http://www.rollaclub.com/board/?showtopic=23844 Would anybody be intersted????? Provided the weather is ok we could have a BBQ etc and I'll put up a big screen in the "backyard" So some interest......?

Hey Guys, I'm a huge Top Gear fan, have seen every episode that has aired in the UK this year (I'm up to date! :sob: ), but CANNOT WAIT for the Top Gear Australia season to start IN 7 DAYS TIME. I realise that there is a thread about this in the live feeds section, but I think such a monumentous occasion like this diserves another!! :o Might even have a "top gear party" next week if some locals are intersted!!!??? Pending interst (and weather) I might set up a 10 foot wide projector screen and PA system in the backyard! :bash: And just to get the juices flowing...... http://au.youtube.com/watch?v=2zV8rVLE120 Si. :y:

Gilmer drives and head studs left NZ this morning, so um NO. Head is also still at Kym's. ......this weekend. :y:

^^^^^thats where the k series group but ones got made. :y:

yeah that'l do.