JayJay

it isnt a straight bolt on , not to far off though the angles are slight are slightly different , i ground of the 3k mounts and got the 2tbmuonts and all into place then welded them to the cross member works a treat , and with a coat of black paint looks original.

fitting c/l is relatively easy on the ke30 Just make sure you put rubber grommet in where you drill hole in the door jams so the wires don't wear and tear to much. when installing the actuators try and keep them as parrallel as possible with the locking rod cheers jay jay

hey guys , sorry about the late reply not sure what it needs for rwc as far as i can tell just a new windscreen and a good clean up. ill try and get more pics up if theres more interest jayjay

bump

i welded the bolt to the pedal and braced it with some small bits of angle. very strong and suprisingly still quite easy to remove etc

Vehicle information: 1990 Nissan Pintara TRX Condition: Good Price:$1000 Location: east melbourne Contact: PM, Phone 0419 974 963, Email [email protected] Selling my loved TRX due to the purchase of my house. Car is very good looking and looked after. has slotted rotors front and back , lowered with low king springs , new shocks, sports steering wheel, extractors and sports exhuast, pod filter. massive stereo system , pioneer deck , splits , 6 x 9's , custom boot install with 12inch sub , splits and 6" speakers. No rwc , or rego, or wheels! stock mags on with rwc tyres as far as i can tell only needs a good clean up and windscreen for rwc engine has a tick in it, hasnt been driven in 7 months .

keep that mirror, the original was knackered.

oh extremely..... nah , it only took a day. customised the engine mounts , the t50 crossmember nearly bolted straight up , just had to elongate the holes a tad. got a manual pedal box off of jip ( ta mate) and clutch master from the ta22. oh and shortened tail shaft. hardest part was setting up the throttle linkage for the twin carbs from a 2tb. even the exhaust bolted up . but thats not staying for long. ill get some pics up soon

just then, sorry bout the wait

Hey all , I volounteer at a youth organization called Car 26, project aimed to get kids of the streets and teach them about cars and how to work on them. anyhoo we got donated a ke30 from a lady whos mother passed away, i bought it of the group and now it my project car. Its a 1977 ke30 , done 96,00 genuine ks , i have the original reciepts , log books and warranty cards for the car along with a comprehensive service record. it has a few dings here and there but not for long. It was a 3k auto but i have recently converted it to a 2t engine with a 5 speed box that i got of a mate with a few celicas. runs good as , still got abit to go though.

you need to use 7mm metal back wipers not hugely common but are a good fit. bitch to trim to length properly to

may just be a fuse or relay, check those, near the accel pedal.

let us know how you go? looking for something for my 30 , might be able to do this and make custom camber tops

hey guys , just wondering how you got past the speedo cable issue? they don't marry up? any help would be good ta jayjay

where in thailand are you going? my favourite place was chiang mai , whas the nicest city , nice people , good markets, food , lots to do lots of adventure tours like rope climbs , mountain bikes etc. jayjay

looks great bud , simular colour to what mines going to be , good to see it on a car first . jayjay

That rolla did belong to a dude called scott It one first place at The ferntree gully autobarn car show i organised. heres a pic with his trophy

theres a chemtech product called BLITZ thats a really good cleaner for alloy, comes ina 1 lt bottle , can get it at autobarns

Hey all, My names Jay , i recently purchased a 1978 ke30 corolla. Its on e of the original one owner old lady drives to church jobs. its a 3k auto , done 91,000ks with full sevice history , books , warranty cards and receipts. I just got it roadworthied and all it needed was a rust hole fixing and a new windscreen. Got it registered yesterday and now saving some dollars to get it look schmick. Interiors in perfect condition still. outside just needs a lick of paint. Just waiting on some better weather , bugger sand in the cold. I live in monbulk ( south eastern suburbs) and work at Autobarn. ill post pics when its washed hehehe

Nearly all after market tachos have the same wiring Positve Earth Lights Memory and signal. You can get a signal by connecting the wire to the negative side of your ignition coil. JayJay

yeah its a radiator and the website that published the photos is fullboost because they covered spring nats

I reckon the best value for cash at the moment would be the Gizmo Intelligent boost controller, Suits internal and external wastegates, digital boost gauge , 4 boost memory settings, adjustable up to 2 bar ( 29lbs) , Risc processor and a mosfet solinoid. It performs really well , looks great and very easy to install. (only 4 wires ) RRP is $299. come in and see me and we will what we can do. Jay

hey man , did you want the d.05 , d1, d2 or d4? not a cheap sub , around the $1000 dollar mark let me know or come in and see me and we will see what we can do. cheers jay jay

ok , saw my mate scott today. hes running a vn 5.0lt motor in his rolla