bass4you

so do I spoke to the guys who picked it up bare shell on trailer towed by four wheel drive at bp on west terrace sub 7sec quarters would be for sure :jamie:

cheers guys will have to investigate much deeper I'm thinking

I am wanting to put T-18 front disks and calapers onto my ke25, thing is I want to retain the original stud pattern as I have the wheels that I want, and would prefer to keep them rather then buy new ones to suit different stud pattern. anyone know which parts are interchangeble from other models to do this with the least amount of headaches I know this may have been covered in other posts have looked at some most relate to 55/70 models to 10/20 models still not sure if the T-18 ones are same/different from these any help would be greatly appreciated cheers graeme

not sure what I will do about lower part of the flares as they cover wheels bit like a built in mud flap of sorts when I get some more pics I will get a better one to show what I mean :2thumbs:

going to be using front guard flare from T-18 and graft it into mine hopefully it will look ok :yes:

plans to date (hopefully)are as follows, motor-3tc not sure what mods yet,probably just mild rebuild. gearbox-t50 5sp diff-standard for now have T-series to shorten later seats are being donated from a 99-00 series wrx, front ones fit no dramas rear will need laydown part to be fixed apart from that almost exact same width. wheels-leaving ones I have on now color-can't decide yet keep finding new colors on new cars that I like is driving me nuts :hmm: Rear flares were done 15+yrs ago by a crash repairer that we once knew for a small cost of $400 not bad considering they are 100% steel

Hi guys kinda fell off the radar for a while back now,finally got enough motivation to drag out of its 15+yr slumber my KE25 don't have many pics as yet but will put up more as I get them.

still like to bitch slap the person who sold the 25 to topgear knowing full well it was going to get trashed no matter what condition it was in :bash: :sob:

Hey Tally is this in sa coz i wouldnt mind having a look at some of these pm if it is cheers graeme

looking at changing brakes on my 25 and was wondering what is intercahangeable with other models I have the compleate running gear out of a t-18 but obviously the lower mounts for the struts have different spacing to the 25 and also the spindle is of different lenth ,I have check the two against each other (both out of car) main thing I would like to know is there a strut that with mate up to the 25s lower are at all as i would like to keep the original 25s lower arm but be able to put the larger brakes on it as eventually I will be putting the t-18 diff in as well due to the fact that I am going to be using the 3t and t50 box as well any help would be greatfull cheers graeme :yes:

I'm with Philby on this one if you check out your old auto shifter which makes it eisier to identify which is which in regards to the reverse switch wire and the illumination and the switch that is activated only when in the park or neutral positions, don't forget the reverse switch wiring from the shifter has to be rerouted to the manual gearbox reverse switch or else your reverse lights wont work I did this on my ke25 years ago when I changed it from auto to manual hope this helps cheers graeme

Is basically the same in S.A. you must give way to all on coming traffic even if it is merging into another lane, and regards to scamin anyone for some extra $ is the reason we pay higher premiums and insurance companies are more reluctant to accept certain claims despite how legit they might be.

some newer types of tyres are coming out with a rim protector manufactured into the walls of the tyres as well which can make a difference as well

hate to say it but the v6 toyota lexen was a rebadged vr series commodore , holden also did this with the toyota camary which was rebadged as a holden appollo, I have seen the toyota lexen on the production line at holdens plant in elisabeth with my own eyes sorry :P

nice score dude looks like its been well loved should be an easy fix by the looks

Doogs one way you can work out how big a wheel you can fit under your guards is to measure the maximum width from the wheel arch to the inner body panel allowing for clearance/tyre flex then work out where the rotor/drum face meets the wheel back face in relation to your maximum width measurement this should give u the positive and negative offsets you require to then find a wheel to suit hope this may help a little

hey Tally don't spose you have the specs for the struts,brakes etc

or self destruct button or :jamie: button

yep anything is up for grabs and its not always 50-50 gets even uglier when kids are involved they can get more if their lawyers feel like it so super house cars anything that u had together before they left is all in the mix and they can leave with the kids very freely but if the guys try it the cops are up ur ass that fast its not funny :D my ex worked stashed money before she left and all and is refusing to let me see my daughter at all so far its cost me 6 grand trying to fight it so my rolla has taken a big back seat at the moment ;)

hey tally lookin great so are you using the ae86 struts on standard 25 lower arms if so do they bolt straight up or do you have to modify them at all cheers graeme

not always that simple hey was with mine for 10yrs my baby girl was almost six and we were married when she left cops wont even go there because of a peice of paper that say marrige cert. sucks either way

If I remember corectly when the GST was first going to be introduced they were talking about putting around 12% GST on ALL products and thus getting rid of the ridiculous 20-30 or more % taxes we were payin, And in doing so they were going to remove the income tax consindering we pay tax on everything we buy anyway this way if we made $900 a week we took home $900 not $700 or so after the tax had been taken out ! however if we bought a paper,cd food etc we pay a straight out 12% tax on each item but for some reason most poeple didnt realize this was their idea because they only saw the fact that they would now be paying slightly more tax for some items, and forgot the fact that they would be getting all the amount of their pay in their pocket at the end of the week to me this seemed a better idea. id be happy to pay slightly more tax on an item if it meant I kepted all my earnings and if i didnt buy anything id still have all my money in my pocket

its between low-north and high-north :laff: sorry its approx 220km north of adelaide port pirie to be exact

Hey guys and girls anyone get up mid north part of the country at all as i have seen a few rollas gettin round that don't apear to be local also it would be interestin to know so as to catch up,meet a few of you :) cheers graeme

wonder just how many of us have lost cars to the other half dare say it would be a few at least :)