You can just use a "normal" EFI system (lift, surge and pressure pump) as it has the return line. If you find whatever EFI pressure pump you're using is a bit too much, run its power sourch through a ballast resistor to drop it to 6v. ;)

 

You can use one of these regs with a carby fuel pump, however you would bother with a Holley Red/Carter Green etc as they only make 6-7psi. Using a Holley Blue or Carter Black (12-16psi) would give you a potential max boost of say 10psi, and you won't bust the needle and seat open.

 

What are you looking at using it for? Forced induction on the carby 4age you have?

 

Only to supply fuel to the carbs, No forced induction, My van also has a factory return line thats why I'm just hoping to run that.

If thats the case I honestly would not bother with one of those regs just for the return line out of it. Just run a holley red or carter green (either of those will give you adequate flow) and use a $30 speco carby reg (one of the 1-6psi adjustables) and you're good to go! If you wanna spend $90 odd on a reg, buy a Mallaroy!! ;)

 

The return lines in carby ke's etc are more so just a "breather" than a return fuel line as such. All part of the pollution shite attached to the charcoal canister (but I probably don't need to tell you this!).

When I set mine up, I didn't even entertain the idea of using it for a return as its like 3mm ID. Just used the normal fuel send as a return and ran new 3/8 send. Have recently noticed that Xe7X's have 3 alloy fuel lines, which are also bigger than 30-55 etc, so they may be more usable!

 

[/rant] :bash:

If thats the case I honestly would not bother with one of those regs just for the return line out of it. Just run a holley red or carter green (either of those will give you adequate flow) and use a $30 speco carby reg (one of the 1-6psi adjustables) and you're good to go! If you wanna spend $90 odd on a reg, buy a Mallaroy!! ;)

 

The return lines in carby ke's etc are more so just a "breather" than a return fuel line as such. All part of the pollution shite attached to the charcoal canister (but I probably don't need to tell you this!).

When I set mine up, I didn't even entertain the idea of using it for a return as its like 3mm ID. Just used the normal fuel send as a return and ran new 3/8 send. Have recently noticed that Xe7X's have 3 alloy fuel lines, which are also bigger than 30-55 etc, so they may be more usable!

 

[/rant] :bash:

 

Nah mine actually has 3 lines, Fuel feed, Fuel return and canister vent, Heres a pic, I have the feed line with a short hose as i drained the tank a bit:

 

Nah no NOS seat covers scott....I really like those playboy ones with the big pink bunnies on them!!.......NOT ;)

Nah only seat covers that would go in this car would be a snap-on one, for working on the car with a dirty arse! :bash:

 

Amen to snap on slip ons!!

 

cheers, scott

Amen to snap on slip ons!!

 

cheers, scott

 

Better than that.....Amen to having a father who used to be a Snap-on dealer!! :bash:

 

My siblings have been told...."you guys can have the house, cars, bus, & bikes, I just want the contents of the shed"!! :y: ;)

and then simon will open tassie toyota's with me =D

quick pic for the masses, let me introduce you to "bower bird paradise" :), still more blue bits to come!!

 

 

 

O....M....G..... how did you do the RED BULL coil???

i freakin love it!!!

lol

Awesome lookin motor!!

O....M....G..... how did you do the RED BULL coil???

i freakin love it!!!

lol

Awesome lookin motor!!

 

I would imagine he just cut a can, and slid it around the coil...and the bracket holds the lot together

I would imagine he just cut a can, and slid it around the coil...and the bracket holds the lot together

 

:)

 

The red bull can was a bit too long, and the diametre was bigger than the coil too.

Just cut the top and bottom off, trim to fit, slit down the back (bottom side of coil), and yeah the bracket for the coil holds it on.

 

If you're going to copy me at least use a V can! :( :)

Edited February 7, 200818 yr by Taz_Rx

What nexts, a coke can around the fuel pump:)

had a hard day of work on this today i did like 3 things maybe and simon did the rest LOL!!! :( shouldn't be too far from working now :)

Edited February 9, 200818 yr by roids70

had a hard day of work on this today i did like 3 things maybe and simon did the reast LOL!!! :( shouldn't be too far from working now :)

 

Bloody better be,I'm waiting to hear some good numbers so i know how hard to push mine.!!!!!!!!!!!!

:) updates is it close to running?

he just needs some cables for computer to laptop to get it just to run fine, but also just a few little things need to be finished as well

Edited February 10, 200818 yr by roids70

he just needs some cables for computer to laptop to get it just to run fine, but also just a few little things need to be finished as well

 

Yeah silly prick ordered the wrong one. |blink|

 

HAs he ordered the right one now????