It's_AUDM_Yo

I guess its sort of a O-ring. Looks like this (not my actual ones) Are overhauls expensive? These brakes seem to be in quite good condition but an overhaul could be nice.

Oh how could I forget that, just the one that goes around the piston in front calipers.

Ok so I get RA65 struts/ Brakes for my KE70 and one the Brake Seals has a couple of holes and I was just wondering where I could get them from? I tried Supershit and they can't get them. Would Toyota still make them? Cheers

Sleeve kits you just cut your strut and weld it on, so you can go as low as you want and generally they have about 60mm adjustment. The reason everyone uses Corona struts is because there is a much greater range of shocks and brakes that can be used compared to the KE70 ones. Hope that helps,

Member Name - It's_AUDM_Yo (Leo) Area - Brisbane-Southside Daily Drive - 2002(ACV36R) Camry Sportivo

Hey fellas! just noticed this.... My name is Leo I'm in Brisbane - Southside on the weekends and Goldie during the week. (for now) Daily drive - 2002 Camry Sportivo Project - 1983 KE70

Thats the plan keep it fun keep it cheap.....ish Also getting some 14x6 +8 Enkei Mesh's from Otomoto on Monday!

How I got the car Chucked wheels and bumpers on. How it is now Parts List Engine: AE92 small-port 4A-GE Cut 'n' shut intake manifold TRD copy extractors Mandrel bent 2.5'' with sports muffler and high flow CAT Egay catch can Cusco Strut brace Fuel System: 1L Surge tank Bosch BFP070 main pump Goss GE015 lift pump Drivetrain: T50 TLS short shifter Unknown clutch AE71 driveshaft Suspension/Brakes: Front= RA65 Struts RA65 Brakes RA65 Power steering arms KE55 Low control arms HSD Coil-over kit 8kg Springs KYB Excel-G's from SW20 MR2 Rear= Lowered springs KYB 343113 shocks Interior: Personal Neo Grinta OBX Daytona 2'' SAAS oil pressure gauge 2'' SAAS water temp gauge Exterior Egay mirrors Kamei Lip Louvre ​Wheels: Enkei Mesh 14x6 +8 Watanabes 14x7 +10 T18 stocko's ​*WILL UPDATE AS I GO* If anyone wants details or photos of anything just let me know, I'm happy to answer.

Lookin prime mate and cheers for the wheels a few weeks ago!

Haha my bad fairly new to RC :doh: . Only just flicked through the thread as I was feeling a bit lazy.

Hey fellas had a quick flick through of the thread thought I'd put my 2c in. Have any of you heard Mount Neebo its about a 30-40min drive from the CBD. Its a excellent drive can't recommend it enough at the top there is a large carpark/lookout fit 50ish cars I reckon. Has little to no traffic at night. Get a great view of the City and the Gap.........Would be really good for a Friday/Saturday nighter. Done it about 10 times with mates and enjoyed it everytime.

I'm interested might bring the Camry down for some action!!!

LSD and if you can't afford that then weld the sucker.

Thats going to be one crazy thing!!!

If you supply a train and the horses I'll give it a crack :lolcry:

Got ya :wink: hahaha April fools.

Haha just what I was thinking the merc dude is such a wanker.

Found this interest to see KE70's getting some extra R E S P E C T. Beally's car on some Tripple J thing. If you haven't seen it here you go. http://www.youtube.com/watch?v=MX6CXeuAdtM&feature=youtu.be Not sure if this is the right section but it is automotive related?!?!?

Yeah thats what I thought. I think I have ra65 power steering arms anyway :)

I ended up getting really good deal on ra60 struts brakes etc so I'm going to use those. Still trying to find Sigma LCA's it seems like a mission to get them. I've got the ra60 rack end I believe. Going to order rack spacer from AJPS soon and same with camber tops/coil-over sleeve. What else should I do to improve the lock, Will the 86 knuckles go with ra60 stuff or can I shorten the ones I got or is that dodgey ?

Excuse my noobness but where abouts on the steering knuckle do you cut and shut? The part where the tierod end connects to?

Nice seeing the picture if lock spacer was not impressive haha. I thought it was going to add like 5 degrees max.

Anyone use AJPS lock spacers/ any lock spacers and are they worth getting? Or is there a cheaper way of improving lock

Well I'm just building a cheap and cheerful drifter but doing things properly ei not choppies lol. So I think I'll go down the corona route as anything with AE86 is 10 times more expensive. Thanks again mate! cleared a lot of stuff up.