SA / Adelaide

hey guys I'm trying to located a place to get my soarer head gasket done its got a 7mgte in it and its an 89 mz20

Hey guys id like to have my grill and tail lights on my KE25 cleaned up by a proffesional and painted the same as the folling KE25. If anyone knows of anyone who can do the job that would be great! Cheers Tally

Hey guys, just wondering if you could all keep an eye out for my corolla. its pretty distinctive. it looks like this - except the side mirrors are actually painted bright orange! it was stolen yesterday from Hutt st (just opposite the stag) at between 4 and 5:30pm its pretty easy to recognise. if you see it, could you PLEASE gimme a ring or e-mail me! thanks guys gerald

all of a sudden from no where at all a tumbleweed rolls across the sa section of rollaclub. just as quickly as it came, it is gone again.

Hey guys just wondering if any of you may have seen a Lawn Bowls club sticker on some old Grandpas car around the place. I want to get one for the KE20 and slap it on when its done LOL. I know I've seen one in someones avatar but they may have been interstate. Ben

my new daily

Hey everyone just wondering and hopeing that someone on here can help me out. i need to borrow / buy a block and tackle so i can do an engine removal on sharki. anyone able to help me out. may need to borrow for a while as its needed so i can do a respray on my engine bay cheers in advance

Hey, just wondering if anyone has any pics of my KE20 (SIK 020) from bay to Birdwood on Sunday? thanks, Ben.

Hi guys, I'm wondering if anyone on here ended up with either of these two cars... They were both sold from the Barossa Valley * The KE11 because i just want to know if it's still around - I have many fond memories of that car! I miss it :hmm: * The KE20 because it is still registered in my name after 6 years... Scanned photos so I apologise for picture quality The KE11 It was a white KE11, number plate RBK 537. It had a 4K, chrome mazda RX4 wheels, tacho dash, black interior and a small chrome exhaust tip. The body was pretty rough but i don't remember it having heaps of rust... I sold it roughly in 1998 or 99 to a guy who lived up in Happy Valley i thin…

Hey, just wondering if anyone knew where Scotts old PMP020 minta KE20 is now? was very pale blue/green, surely someone would have pics? Cheers, Ben.

Just thought id like to say, "Merry Christmas, To everyone here in Adelaide!" Take it easy over the Break and Drive Safe :y:

For the sake of accuracy in comparison.

While looking around for certain legalities I thought this might help some people 8/ Modifications to Passenger Cars, Car Type Utilities and Panel Vans If you think you may have more useful information by all means share it :jamie: Cheers Fusion

Hi all i wasnt sure if you had already seen this, but if not heres a link to my project. i think itll be hitting the streets within the next two weeks!! Woo Hoo!! Project Rolla Rod

hey all, I'm posting for my mate hamish! last night 14/5/08 between midnight and 6am his ke70 was stolen from outside his house! he lives in the clapham/mitcham area the car was broken into and prob has a broken window as there was smashed glass on the ground... if you saw this car you wouldn't miss it! it is low and running on WHITE TOM IGETAS (belong to MACK-10) CAR DETAILS: - white - flat front - set of 4 White TOM Igetas, 14s - double black striping on the side with the words rolla on one side and holla on the other - plates UWR 493 - diagonal black strip on the taillight please keep an eye out! hamish is a great kid... wanna see this car…

:( They're SoundStream SST6.5's (6.5") for the front doors to replace the ones I damaged in the last sound-off they'll be going in next week and will match nicely with my 6x9's :y: I'm a happy camper :y:

hey guys i started a similar topic in the sa section but magically got moved and I'm getting no results so hear goes who have you used and what results have you gotten for finding the imported parts and engines such as a 4AGE 16v NON TVIS 7 rib block for example

I'm after the manual conversion parts from an AE71, anyone know where i can get them from, or does anyone have anything for sale? pm me if you like, will pay reasonable money for the right parts. Cheers Simon

Hey guys, wondering if you know of any local places where I can get some bolts and shit annodised? I'm at Ridgehaven/Modbury if that helps at all. Cheers, Ben.

Looking at getting my KE25 calipers rebuilt. I wanna keep my 12" rims now lol so I can't upgrade to ke55 brakes as they need 13" wheels. They are seized I assume they would need a rebuild kit thrown at them. So if anyone could recommend a good brake specialists that would be great. Cheers Tally

If you see a yellow KE25 driving or abandoned around ADELAIDE please call/message 0416080462. Jot down the rego number, if its mine claim your reward Thanks

KE30 Two Door with some rear end damage... KE38 Wagon which looked to be pretty straight... Both can be found at Active Motor Wreckers at Gawler.

Hi everyone missus has sold her commodore and is driving me mad because she can't find a Corolla seca the injected kind with a 5speed please if you know of or where to find one let me know. cheers

Hey all just wanted to show off my new wheels, I got them on Saturday. Propprer chuffed :(

i don't know if anyone is interested but there are a couple of ae82 twin cams at the womma road u pull it 1 of them still has the 4age in it. Well it did on friday.. cheers scott

G'day all I scored a free ke55 today! what a wonderful machine it is, and hey, you can't get better value than free! This is my first corolla, i've been looking around for one for a while, and when this one came up as FREE i jumped on it. So far it has cost me a train ride over to alberton to pick it up, and a favour from a friend to borrow an old battery to get it started. Good stuff: - 4kc 1.2L sedan, manual - Odo says 315,000 kms - starts and runs first time, even in this cold weather - Even has the original owners handbook, logbook and service book! Naturally, it has had a pre-sale inspection, and nothing more ever logged - All lights, horn, and the radi…

Hi, I want to convert the lifters in my 5k from hydrualic to solid and i have no idea how to do this myslef so i thought i would leave it to a pro. Does anyone know of or could recomend a place to get this conversion done? cost? Are the solid lifter's out of the landcruiser 3F??? motor mentioned in the knowledge base/FAQ readily available and has anyone used them before? Any info on the subject appreciated, Cheers, Andy

hey guys just spent the last few days putting in my 12a rotor into mt ke55 since thursday i have worked flat out on it only to find out the motor and box that i had was stuffed so i tracked down another one and it runs great heaps happy but tied got it driving at 8 this morning I'm going to bed as i have only had 6 hrs sleep since thurday and energy drinks arnt doing a thing lol

Post hear for stuff you find at Local wreckers.

Hi guys just wondering what people thought on the SA corolla scene. Would love to hear some opinions. I myself can't make it to most northern "events" and havent been out and about much since pulling the car apart. Do we do much in adelaide compared to other states ? should i be comparing us to other states ? Just trying to get some food for thought :)

I am trying to find if a workshop in adelaide could help me with custom mounts and other custom parts like steering, sump and some other things. Any advice would help, Thanks

sorry

Hi all my names arran, new to the site just wanted to introduce myself and post a few pics ive got more on another camera thats lost :jamie: anyway hope you enjoy

hello every one if you have not herd i have put a 4k into my car the plan was to put the SU's on, but i can't. i can't figure it all out any who that's not what i need help with. I get my P's this Monday and can't drive my car :lolcry: the timing is out and when i try to start it it struggles, it sounds like its in gear but its not. i am so stressed i wish i never changed engines. any way if there some 1 in Adelaide i beg you to help me get my car running good. i have not got much $$ and not many tools kind regards myles :hmm:

I don't know if any of you guys are on this? I came across it just then http://www.club-k.co.nz/Forums/index.php but it's worth a look, alot of helpful information

was found this morning looks like all they wanted was the stereo and my bike bit annoying

ok this is going to sound weird but is anyone an apprentice for a honda dealership in the grater Adelaide area? my grandmother had her accord serviced today and said the young apprentice that dropped her home was into early corollas. just wondering if it was anyone on rollaclub.

just lettin anyone who cares know that i am no longer known as charity rolla the new name is now Jason KE30 thanks guys

This to me is very serious so i don't think its suits the off topic and jokes section. There was a time when BP the bigger stores had the proper flavoured slushi machines, the ones that had bigger bits of crushed ice and about 8 flavours to choose from do these, still exist ? I just drove to 6 different stores to find them but instead they only have the crappy mcdonalds style machines. I need help with this guys so please leave a reply after reading this post or i may need to buy the legit machine after xmas as i don't think ill survive the summer. so as the topic description says, where is best place for a slushi which may include non service station loca…

hi all, I put another engine in my Rolla but can't get it running properly, it starts up but when I go to turn it off it keeps running and the only way to stop it is to drop the clutch. Anyone got any suggestions, or willing to help/have a look at it for me? I live in Salisbury Heights. I haven't driven it on the road yet so I don't know how it goes.