Robert

I'm pretty sure that 66nm is 6.6 kg-m

My brother went. I went last year, but it was too ricy for me :y:

Just wanting to know if anyone is going to the rally at mt crawford on the weekend. http://www.toyotarallysa.com.au/images/Pho.../Action0502.JPG Cheers, Rob

there you go http://i110.photobucket.com/albums/n111/Ro...06/100_0392.jpg You can sort of see them all, but you can definately see no. 1 so follow the firing order from there And the timing is 8 degrees btdc but some motors like 10 or 6 Cheers, Rob

So i take it you don't want my dad to look at it then?

Does that include paint?

Powertech Mechanical 158 Commercial Road Salisbury, SA 5108 Ph: 8250 5074 Fax: 8281 8030

Use Dot 3 in most Toyotas. Instead of disconnecting the brake line, cut a slot in the bracket that it goes through. Cheers, Rob

Anyone Know?

the doors are the same so it will fit.

Run the wire under the car, not inside it. :laff:

Do you still want a quote from my dad??

trust me, points suck.

omfg its not still auto is it?? :laff:

big end - 52 nm main - 66 nm others: head - 66 nm

Burton Paint And Panel 588 Waterloo Corner Road 8280 9569 Ask for Warren or Geoff, They're good blokes and have been in the trade for ages. Cheers, Rob

Thermostat location, throttle body size and tps switch, also i think vr's have electronic kick down and oil filler cap on the other rocker cover. Cheers, Rob

You need a grille, headlights, headlight surrounds, 2 screws and 1 spring for each headlight, the chrome trim that goes around the headlight and possibly new plugs or a new loom. I have some of these parts located in adelaide. Cheers, Rob

Crossmember is now in. 4K has new welch plugs, front and rear main seals and manifold gasket. My gearbox oil was black after 2500 kms, i was using valvaline duragear synthetic 80W-90, I am now temporarily using Castrol VMX because its all we had at trade school :P . I set a personal record today, engine and gearbox sepearted then removed in 1 1/2 hours ;) Cheers, Rob

EF Head, snail manifold, cam, extractors, exhaust = Power house and sounds f@$king awesome ;) :P

:P little bit of dish for good measure, love those rims.

:P

UPDATE Picked up a new crossmember from Raven. The lower conrol arm bolts came lose in mine and flogged out the bolt holes, it was funny i would hit a bump and nearly get thrown off the road. http://i57.photobucket.com/albums/g209/Rob...rossmember2.jpg http://i57.photobucket.com/albums/g209/Rob...rossmember1.jpg It cleaned up alright, but I'm still going to paint it. http://i57.photobucket.com/albums/g209/Rob...crossmember.jpg Found an efi pipe that fits the top of a corolla aisan carb. http://i57.photobucket.com/albums/g209/Rob...1/efiintake.jpg And some factory ef falcon 6" pioneers :P http://i57.photobucket.com/albums/g209/Rob..._01/falcon6.jpg They're sound 4 covers though. Went up to ROL-110(Scott)'s House to pick up some parts today, had a good hills run on the way back, i was keeping up with a 4wd r33, nearly drifted into a guard rail, but i corrected it, My brother and his mate were shitting themselves telling me to slow down :P

95 or 98?

what was the problem???