Trev

And what cars have you installed them too, normally always had to use the haltech temp switch on the skylines and we used the haltech map sensor as why wouldn't you, you can't say that the haltech is compatible with all factory sensors because that is just stupid and being 16 have you fitted one?

I used to work for a haltech dealer :wink:

As in the 32/36? http://cgi.ebay.com.au/K-N-Air-filter-Weber-32-36-DGAV-38-DGAS-63mm-56-9075-/330555429733?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4cf6a39365

I can get you the bosch replacement o2 number as my mate just changed his but yes they should be the same providing it is the same motor/gearbox combination and the listing is actually for a RHD car.

Surprisingly, I never once took a Triumph for a drive when I was working at R&T, went passenger many times but that is it.

The only time I will give a customers car a bootfull is when checking boost levels and smooth running at high rpm.

Mini Moke when I was 11/12, got it for free from the guy down the road, sold it for 160 bucks a few weeks later.

The haltech will use the factory cas or electronic ignition (dizzy) as an input, most of the time the sensors will need to be swapped out for haltech items.

WGMG, being sick over the holidays, it is the only time that I ever get sick, now I have the rest of the week off as I have to take tablets to keep fluids in at both ends.

Very nice:

Evan there is nothing wrong with lathe machining a flywheel, there is a myth that you have to have a circular motion or they won't work, wonder why brakes work then, road and track does lathe machining and there was never a problem. P.S. stop watching those f@$king videos.

Yeah it is a servo.

Don't get the tech edge as they only make a kit and don't guarantee it to work with any software, we got ours to work with the nistune after a lot of stuffing around. The innovate is really good, you can also buy the obd-II reader kit (LM2) which displays the o2 in realtime and can be used as a scan tool. If you want something a bit more advanced then look at the Dynojet wideband 2 system, it is available in an LCD multifunction or a guage, if you decide on buying it then get it from Serco at Capalaba, cheapest by far.

Got a pic when I was in the other day, the boss wasn't around though.

Yeah that would have sucked.

Intake flange.

Hope the holidays are fun, finally having some after working 2 jobs at 18hrs a day for the past week and a bit.

Nah just swap the 2nd lead for the 1st and the 3rd for the 4th and see if 1 and 4 then does it.

Replaced the cap? If an engine overheats at speed then it is generally a blocked rad/system or a stuffed cap.

Who owns the black T18, he came into a workshop I was at the other day.

Swap the leads around and see if the new cylinder is doing it, sounds like a resistance issue in the leads.

Trev084 Phil will rape you :P

This, love it.

It's ok man, the ute is currently sitting out the front with a canary on the windscreen, where are my haters?

I forgot they used the longer doors, carry on.