Jump to content

19914afc

Regular Member
 View Profile  See their activity

  • Posts

    1391

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by 19914afc

  1. 19914afc
    WOAH!!! ETA of on road?
  2. 19914afc
    Had mine recored for $200.
  3. 19914afc
    My T18 with rear half from front seats back stripped sound deadening with me in the car and 1/2 tank of fuel weighed about 950KG, I don't know what it'll weigh now with 1uz, bigger box, bigger diff, bigger brakes, bigger wheels, but no dash, no heavy steering box anymore no sound deadening at all.
  4. 19914afc
    Headers just fit on pass side drivers needed cutting up and reroute the outlet look rough but will do the job. I do want to sell the fins as I want to get a set of superlites they make them in 15x8 and in 5 stud so I'll have matching wheels all round for circuit days at lakeside or QR.
  5. 19914afc
    Shit this has been a while, haha. Done a bit, but not much in the last week because I bought a new bike, had to go do Q ride to get R license and then put a temp gauge and tacho on bike because it had none. Here are some pictures because I couldn't be bothered typing everything I've done, haha There are more but couldn't be bothered uploading them, haha. Here's one of my new toy :)
  6. 19914afc
    Hilux drums are huge, and for such a light car?
  7. 19914afc
    Probably too dear to send to the states. $1800 sounds pretty good for a full cage.
  8. 19914afc
    ae101 has ITB's, do don't need to cut and shut manifold, but is the more expensive way of going 4age, if you want an engine upgrade tell us how much money you have to spend? You should allow around 5K to do the engine swap if you can do it yourself. Some people have done it cheaper, others have cost more so don't bother telling me you got an engine for 1k and that was all you had to buy. Then allow another about another 2-3k for suspension and brake upgrades.
  9. 19914afc
    Bond cages can send it to you as well, but there should be someone who can make one to suit your car locally to your area, probably won't be cheap though so don't expect it to be.
  10. 19914afc
    Wow! watch out it might not like the sun after being stored for ages! Good to see its out and about though, whats getting done?
  11. 19914afc
    I'm selling a hilux diff to suit ke70, which would match the 5 stud pattern on the front of your car.
  12. 19914afc
    Yep! I'd say its just as strong holding things as sikaflex probably stronger, I ran out of seam sealer and had a couple of spare tubes of sealant and used them, haha. Worked well!
  13. 19914afc
    Not alot I sold a engine with 130xxxkms, box, both crossmembers near new starter, and everything else to get it running for $300...
  14. 19914afc
    Only 11k revs! what, I thought you would go find one from a CBR250RRand rev it out to 20k.
  15. 19914afc
    Yeah I would just drill holes in the right spot fit the outer trim bit to the light and put a dab of grease on the end of the studs on the lights and line them up might line up with a hole and just drill where the grease mark is.
  16. 19914afc
    Ah ok, forgot what you said. I'll bring it to them when it's done then, thanks.
  17. 19914afc
    Why not just buy an adapter cheap enough.
  18. 19914afc
    Where did you get your diff housing straitened? I've got another hilux diff to do, do they need anything other than the diff housing?
  19. 19914afc
    Just drill holes and bolt shit up, I don't know if that will actually work but sounds like the way I would do it.
  20. 19914afc
    Put an SR20 in if you have a spare 10k lying around and can do everything to the car yourself. Otherwise put a 5k in.
  21. 19914afc
    I was out your way today if I had of seen this before I could have brought some toyota black sealant, that stuff works wonders, haha.
  22. 19914afc
    9.5" would be plenty. Flywheel shouldn't cost too much although a one off, maybe get a couple if you can offload them, or do you want to be the only one with a RWD 2az haha.
  23. 19914afc
    Go to a toyota dealer they will be able to tell you for sure if aus delivered stuff will fit, otherwise as said get the wheel cylinder repaired and you could just remove the brake shoes and give them a very good clean with brake cleaner... Not the safest option but will get you driving again. And wouldn't be hard to fit Australian stuff, should just be a case of unbolt old stuff and put new on.
  24. 19914afc
    I would be inclined to think they would all be the same as the australian models, you will need a new wheel cylinder, brake shoes and maybe a new drum if you want to replace that as well at the time, the shoes will be covered in brake fluid which is the reason for replacing them.
  25. 19914afc
    The engine will with an ae71 xmember, the rear shocks are a good upgrade for ae86 front struts. I think that's about it.
×
×
  • Create New...