love ke70
-
Posts
3226 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by love ke70
-
:jamie: read the thread he had to mod his but i think it might just be because of the setup he was using
-
http://www.rollaclub.com/board/index.php?s...l=brake+upgrade from that thread:
-
coz a new brake cylinder is soooo much...
-
measure it up, it will likely be the same. if not, go into autobarn and have a gawk through their book n see if they share a p/n :wink: i would check on my epc, but it doesnt seem to think ke70's exist :rolleyes:
-
yes, that would :wink:
-
vacuum leak... did you seal up all the gaskets properly?
-
I'm still laying money on air. its not going to be booster. may be master cylinder
-
your maccas sucks jon. my ex maccas is hot chicks only :wink:
-
the extra force provided by the booster would make the squishy-ness more obvious... did you try and see if you can pump them up with car running?
-
its been covered before on here, don't know if you had a search. from memory the crank is different and you need block mods if you are thinking of putting a 7k crank in the 5k block. considered goin 4age?
-
http://www.rollaclub.com/board/index.php?s...c=10103&hl= another thing to check is can you pump them up? like, bit of speed up goin down a hill, hit brakes, feel them drop, off and back on in a hurry, does the pedal come back to where it should be? don't know what it proves, except theres something not right lol
-
m/c or air in the lines.... I'm going with air in the lines if you are sure the air is out of ALL 4 lines, then its m/c. (unless you have a leak somewhere) i started a thread not so long ago that may help, will add it in a second
-
and people ask why i love ke70s....
-
but the pin wasnt oem, that bumper bar that left them needing dual knee reconstructions was :wink: so, you don't have to pay for the knee surgery, but you do have to pay damages for the bruise in their chest as they crumpled over and landed on a bonnet pin :)
-
illegal as far as I'm aware. and even if you pass its a likely defect if you get on the wrong side of the ʇ~~ɔstabulary
-
teddy's car sounds better :hmm:
-
to see is girl cry is the most daunting thing a man will ever face.
-
http://home.clear.net.nz/pages/phil.bradsh...0into%20RWD.htm http://www.billzilla.org/4agstock.htm
-
straight as a f@$king arrow! this thing is gonna be gorgeous :hmm:
-
just get a multimeter and test the voltage of the battery with the car running should be yonder 14
-
in that case its just the bigger exhaust letting you hear the combustion completing in the exhaust. try doing an ignition service as the popping would be caused my a miss in the idle circuit. i doubt it would be due to being too lean in the idle circuit but is possible...
-
hehe woopsadaisy
-
so its actually a map sensor, or you just removed the afm? that does look rather rich...about the expected power, maybe a bit low if its in fwd trim... whats your fuel economy like?
-
Suspension / Brakes Upgrde On My Panel Van
love ke70 replied to BOAT ANCHER's topic in General Mechanical
because that would involve reading the forums... -
tension seems good? should have about 7mm flex in the middle of the longest point, i like less coz they stretch anyway although if it was slipping it would likely squeel. is your battery --> chassis earth good?
