Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Oke020

Featured Replies

Cool (and I spose a little sucky) stuff.

 

I'm curious about the huge boost numbers you're running. Is it a function of the nitrous or is there something else going on there? I'm not sure of the exact specs you're running but the turbo looks big enough to pull those numbers at lower boost. The way I understand forced induction is that a normal boost vs HP graph will be pretty much exponential until the airflow goes supersonic at some point in the induction chain, usually in the ports/valves. From there it goes to a more linear increase in power, lots more boost for a little more power. So I'm wondering if theres some kind of restriction at some point you could iron out and see even bigger numbers, maybe even without nitrous...? Just a thought while you're pulling it all apart.

 

 

Should be pretty lethal with wheelie bars.

  • Replies 419
  • Views 320.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Hey mate i run some speedflow and some redhorse, the guy i was getting them off has closed shop, not sure if someone else has taken over the distributorship.   As for the ID plates and the boys in b

  • Hey thanks for the comments :), i am fairly certain it could of went 1000 without gas given another run as the tyres were up to temp, also both passes archie got off it at 7800rpm which is 1000rpm sho

  • come accross this vid from power play the other weekend its sick!!!  

Posted Images

  • Author
Cool (and I spose a little sucky) stuff.

 

I'm curious about the huge boost numbers you're running. Is it a function of the nitrous or is there something else going on there? I'm not sure of the exact specs you're running but the turbo looks big enough to pull those numbers at lower boost. The way I understand forced induction is that a normal boost vs HP graph will be pretty much exponential until the airflow goes supersonic at some point in the induction chain, usually in the ports/valves. From there it goes to a more linear increase in power, lots more boost for a little more power. So I'm wondering if theres some kind of restriction at some point you could iron out and see even bigger numbers, maybe even without nitrous...? Just a thought while you're pulling it all apart.

 

 

Should be pretty lethal with wheelie bars.

 

 

You have to remember that the 1025 rwhp it showed on the dyno was through a near 7k convertor a powerglide and big side wall tyres, with a manual i'd expect it to show another 100-150rwhp.

 

Really the engine is only a baby in comparison to most big name 2jzs, its only 3litre, standard comp, stock inlet valves, 1mm oversize exhaust valves, moderate porting but leaving the port cross section stock. The cams are only 272s with 9.3mm lift etc. It'd be making damn near 1300hp at the engine. Alot of people BS about the amount of boost they run to achieve similar power figures, 50-60psi is not uncommon on some drag 2jz although i have heard most report 30-40psi.

 

At the end of the day i am trying to push 1220kg to 180mph in a 1/4 mile. At 45psi the engine makes enough power to achieve this, just need to get the car to haha

numbers seem perfectly normal to me. 45psi is the norm today, especially when large name 2j's are running 65psi, yes this is reality.

 

boost and nitrous combined seems just as normal, all the auto, big single cars are using the spray and big boost, just like ben brays 1200 ute sr20, nitrous shot with big boost.

  • 1 month later...
  • Author

OKE020 ran 9 or so passes over 171mph this weekend. Engine is still going strong, powerglide is hurt though.

 

I won the final of Drag Radial at the Street machine Pro Street Nationals and made the quick 8 at 1320x :jamie:

 

here is a vid of the last 3 passes in the radial class, gearbox was hurting on the las 2 passes hence the short burnouts, also broke the wheelie bars off on the saturday so kept launches soft.

 

 

And here is incar of 2 passes, 1st pass obviously had a bonnet issue lol

 

this car still continues to inspire me to build/upgrade my KE20

 

can't believe you still use the stock steering wheel, quickest KE20 steering wheel in the world? haha

 

Please keep this thread upto date

 

Any recent pics???

 

Cheers

Edited by 13BT_KE20

top effort, bet the v8 boys would love that

purely one of gods greatest creations very nice got to suck about the gearbox rebuid but i guess its something that just has to be done very nice

poor wipers! bloody love it!

f@$kin love it ;)

 

will get out to see this thing run one day, can we have plenty of notice for the next one please :lol: i know the missus will wanna see it too

  • Author

Final from another angle

I just watched the incar footage on my big screen TV and i

got scared from my bedroom, truly nuts.

Absolutely nuts! Such a neat car

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.