General Discussion

Just wondering how low king springs or similar will make my stock height ke70? Looking at buying those old school supra type wheels. I think they're ma61 or something? Then lowering it a bit so it doesn't look like a 4wd. Nothing too extreme. Ta

Assalam-o-alaikum fellow RC members. Please share me some links of the fasted 4k engine mod done by any RC member. Thankyou.

Hi Rollaclub members. i'm a new member here and so happy to be a part rollaclub. I got some questions since I can't find any swap of 1nz-fe into a ke-70. Need to know that if it's possible to swap it into a KE70 with a 5speed tranny which i don't know what will fit and will the engine work on a Keinhin Flat CV carby? Suggestion and link of whome did this kinda swap would be really appreciated.

Hi, this may seem a silly questions, but I can seem to find the right people to contact. I own registered Toyota Publica but I also have Toyota Corolla KE13 I'm trying to get registered on Vintage Rego. At the moment I'm looking at the VAAWA, but would really rather go with a Toyota/Corolla club. Can anyone let me know how to get in contact with a club so I can join and get an inspection, to get my lil beast back on the road?? Thanks

Hi i brought my grandmas 84 KE70 S model, it has stock 4K engine. runs smooth no problems until you get to a hill. The car will loose all power and stall out. even on a small slop you have to drop it back to 2nd and wont go any faster than 40. Could it just be the fuel pump or is it something big?

Hey peeps just wanting to know what I should be paying for for a standard 4age motor?

ive got a 1982 ke70 and wanting to know what colour will suit it best , ive decided either a black or white (both gloss) ? opinions..

Anyone got one or any idea how to fit clutch cable with out it cos mine is auto atm pls help

Hey guys.. I really want to purchase a ke70.. Not looking at spending huge trying to find one around the 1200 mark... But anyway what are some things too look out for? Age.. Engine.. I want it to be a daily but possibly do an engine conversion.. Any info would be great as I know nothing about these cars ha.

hi all i have been loitering around the internet and notice that there is a lot of people putting bike carbs on their 4k. i think they use a modified twin carb manifold. if i was to use a set of cbr900 carbs what would i have to do to install it correctly? is it ok to just mount the carbs or do you need the bikes fuel pump as well? any helpful advice would be greatly appreciated :)

I'm selling my Toyota Corolla Ke70. It is a rolling shell as the motor does start but there is a bad rattle when it's running and the car doesn't really drive without cutting out. Not sure what brand the rims are but they look pretty good.

Need ID on these rims:

hi people, my wife has a 89 corolla hatch, ive just rebuilt the motor to find the stock carby has no idle or mixture adjustment, I want to put a holley or down draft webber on it, is there any intake manifolds available for the holley. I'm a ford/holden man an have no idea whats available for these 4afc/4age engines. thankyou for any input would be much appreciated by myself an the wife, cheers

Hey guys I just bought a ke70 but the front bumper on it doesn't fit right, I was told it because the bumper is off a ke71 or ae71 maybe not sure, all i wanted to know is, is it just a different bumper skin or do i need the metal reinforcement also?

hi guys i have a ke70 that has a 4k in it, it is running a 3k carby. the problem is when the car starts cold it is fine, but upon warming up it stalls on idle and at traffic lights and such, i am kind of a noob when it comes to carbies and have been searching for a solution. any help is greatly appreciated :y:

What will I have to change to put my 4age into my ke70 witch has a 4k with. A 5speed?

ok so heres the plan i currently own a 1990 nissan patrol with the td42 diesle engine shes a pig and not to easy on fuel... i ve always liked the look of jdm type cars and thought well i could sell the pigrig and build one for my everyday drive. ok so here is what i am thinking I'm gona have around 10k to spend on it i know some people will say geez thats way to much to spend but what the hell you only live once hahaha anyway i was thinking to start off i would get myself a ke70 i really want a coupe or a panal van but i don't think thats gona happen so ill have to settle with the four door flat front option. I'm guessing some cleanish is gona cost me around a grand from…

hey guys I'm hopefully going to be getting a ke70 or ae71 project car soon if all goes well at school :) just wondering if you guys can tell me things to look for as in rust or gearboxes being dodgy any help will be appreciated thx :)

Hello, I've got a 1978 Corolla Liftback that needs a windshield. I've had bad luck in searching for one; old Corollas are a rare sight where I live (New Hampshire, USA). Does anybody know a good resource for windshields? Here's a picture! Thanks, Adam

I have a 1983 KE70 slant corolla and I want to put a 32/36 weber on it. Looking at the original carby there are quite a few vacumn hoses on this carbby, and only 2 on the weber. Can anyone help with what they are all for and how I go about fitting the new carb.

do sedan handbrake cables fit wagons, if so were can i get some?

i have a 84 ke70 slant front and was wondering what chin spoiler would look best on it as well as wondering what kind of boot lips fit/look good and where can i pick one up from?

i have a rear window louver for my ke, it has all the plastic bolts but not the actual adhesive pads to stick to the window for the louver to clip onto :( Does anyone know where i can get these from???? thankyou

Howdy Rollaclub/KE70.com, I'm looking at engine options for my panelvan and was just wondering what advice or experiences some of you guys might have to add. At the moment the panelvan has a 4K 5speed in it with extractors 2'' exhaust and a webber carb. I have a few schools of thought as to what to do with it. option 1- Work the 4K a bit harder... cam, head work and maybe forced induction. Option 2- source a 5K. cam, carb, exhaust and thinking about supercharging it. (not sure on pitfalls/difficulties and tuning) Option 3- 4AGE with basic mods, the only thing that turns me off this idea is the amount of work to get the car legal in SA and the cost of the …

I'm trying to work out if i can fit a flat front conversion into the back of my car for a short 40 min trip? anyone had experience with this? thanks in advance jack

Sorry to ask but id like to know if a 4k clutch would fit a 5k cheers :)

hey my names jamie i just recently brought a ke70 and herd u can put vn or vr suspension coils and shocks in the rear? was just wondering what brand or what ones i should get id like it to be as stiff as possible and sitting just above my 16x8 inch wheels with spacers please help will be much appreciated

hello! i'm a newbie here.. i want swap 1jz to my ke70 gl.. can it fits in??

Hey guys, I'm thinking about getting a car in qld as I live in nsw is there any way I can get the rego change over state It has 6 months in qld??? Thanks Blake

Hey Guys, I am 14 and have a KE70 Corolla that i am currently turning into a khanacross car (with my brothers help) I don't know much about cars although this Corolla will be a good learning curve for my mechanical knowledge and also my driving skills and car control. I will get some pictures up in a thread as quick as possible.

hey guys, sorry in advance because I'm sure this gets asked 24-7. i recently purchased a full set of DGR ae86 coilovers, camber tops on front, 30point dampening etc. i bought these knowing that i would have to change my steering arms/lca's/brakes etc to ae86, but i can't find any of these parts. is there any way around doing this? can i weld these directly onto my ke70 spindle's and have a good result? keep in mind the fronts are weld on's, and the rears bolted in perfect so no issues in that area. Cheers, Ryan

hello everyone I'm building up a ke70 at the moment and had to remove a sticker that was on the firewall and wondering if anyone knows where I could find a new one. Ive got a picture its the sticker that is circled. any info would be appreciated thanks

You may or may not be aware I have been handed the task of improving/modding the sub section of RC that is KE70.com. If you have any ideas as to how improve this section feel free to discuss them here. If you would like to move your *E7* rides thread to this section please PM me. There are a lot of sites out there mostly dedicated to the AE86 with the humble *E7* tagging along for the ride. And lets face it, even though they share many similarities they are a different car. Lets consolidate the awesomeness that is the *E7* into one spot. Chur!

http://honolulu.crai...3357197635.html Guy wants $3500 minimum for it. Comes with chrome front and rear bumpers, tail lights, door vent covers, etc. I'm not too familiar with this chassis, so I don't really know the value of the extra parts this thing is coming with. Along with the specs of the motor however, does it sound worth it?

Hey just wondering if you can double up a ke70 sway bar and if so how you would go by doing it cheers

ok

hey everyone just purcshed at ae71 rolla from an old granny and planning to do a f20c conversion just wanna get evrybodys thoughts of this.

Hope you enjoy the pics. http://www.shiftgearblog.com/2012/09/10th-annual-ostc-oldschool-import-show.html

what do you think stock 4k engine, 5 speed manual short shift. new clutch, new starter moter, new windscreen and brakes. how much would someone pay for it

hey i want to buy a 1984 corolla "panelvan". its tidy as hell and just want to know if its worth getting :/ its got 200,000 ks 1.6l motor??? ( 5k or sumthin)???? the wheels, hopefully get black superlites with it ;) and some stereo gear which is kinda much ofmuchness. aaaaaaaaaand obviously has the appeal of being a "shaggin" wagon sooooo its $3,500 worth the coin or not??? CHEERS!!!!! michael.