Jump to content

cuzzo

Regular Member
  • Posts

    798
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by cuzzo

  1. Hence the reason of needing a good tuner. They are a basic ECU and are priced accordingly (trade price - rrp is a ripoff) Comparing the latest versions of the ecu with a fuel only version with trim pots to tune is just stupid.
  2. Good power at low boost. Wind her up ??
  3. Microtechs are fine. You pay for what you get. You will need all toyota sensors and plugs and the ecu to have a base 4agze map already configured and installed from microtech.
  4. So the rotor is performing like rotors do, losing oil pressure :D Skid pics / videos?
  5. Hey Mick, Hope your not loosing the corolla spirit! Ill be back in the scene this year :rolls:
  6. As the guy above said any motor will fit with enough money, have a look around in the members rides section on here at what others are doing. You need to ask your self: will you rego it? what do you want to do with it (circuit,drag,street, ----drift) Then decide on a motor or two then ask us....
  7. Any pics for us Mark? You know we lurve pics..
  8. This has been done with no firewall mods. Not sure if its still legal in nsw Try google next time mate :P
  9. When i was building my rolla (ke30) and i didnt put the front bar and indicators on, when i indicated the light stayed solid like you explain. Is one of your globes out?
  10. adjustable how? toyota did a good job ;)
  11. What were you using in the old setup to stop tramp?
  12. cuzzo

    Done

    Got a gearbox yet :blinks: ? Manual or auto is the question. If you go auto you'll have to up the boost to 35psi just to compensate :(
  13. Are you setting the timing with the correct pins bridge in the diag connector? Also is your crank pulley from a 4age or 4agze as they use different points to set the timing off.
  14. Be great if there was a service where you could drop off a trailer in your home state when hired interstate. :yes:
  15. Welcome to visit toymods.org.au Joining up takes some time but its worth it. This site has been really good in the past but lately i have experienced a bad taste here......Lets hope it can pick its game up again.
  16. I have a ke30 t50 -> T-series tailshaft minus some unis available in NSW, but postage would suck.
  17. for the lazy ones http://www.nascar.com/promos/allstar/2010/vote/
  18. AHH so they arent a replacement one?
  19. Whered you get the chrome trimmings from? More so the gutter chrome one
  20. 2 door convertible: ZING
  21. Did the sump on this motor need modifying
  22. So does the 2 door sedan doors fit the wagons?
  23. Thanks Jip, If i posted up the first or last few digits of the VIN could it be identified as being correct for a 2door or atleast identify what year (or close to) this car should be?
  24. Yeah http://www.toymods.net - now Ill be back though :D Silver Ra23 took real good care of her and shes looking great like always.
  25. I don't think ive explained well enough. Theres two plates on ke30s. On says the year and model along with any regulations it has passed, the other says the engine type gearbox etc. The one I'm talking about is the first one. It says 4 door sedan when its a 2 door sedan. The later plate does match the firewall but says it was a manual but the badge on the rear says its an auto. all kinds of effed up.
×
×
  • Create New...