SLO-030

Brodie with an orange ke30 2dr used a weber adaptor plate and falcon Single Point Injection to get EFI on a 3k. I know your from malaysia but you may have something similar over there?

i'll be there, as always

Glad to hear she's driveable again. Also glad to see you like the suspension so far.

Sweet, Lookin good. should be heading round saturday to give ya a hand.

paint stripper made it pretty easy. just use a plastic scraper like a spatula. or let it dry up a bit and use steel wool, takes it back to bare metal real good 8/ Car actually looks liek its making progress now that 85% of the outside is mianly one colour (primer)

Industrial Springs 341 - 359 Port Rd Hindmarsh (200m east of the Port Rd + South Rd intersection) (08) 8346 2276 Coil springs (lowered, std, lifted) leaf springs, small springs, U bolts, spring washers sway bars. Industrial Springs

Seaford shopping center. as it says above :wink:

I've heard KE25's have a larger tunnel to accomodate a T-50 for the TE27 model. I dare say you'll have to cut and shut, i maybe be wrong. Just go with a T50, it will fit and plenty before have used it behind the 4ages

Hmmm. keen :wink:

I have a supercharger and K engine fitting mounts if your keen.

Great to hear you got it back man. Must have been some weird coincidence that you happened to find it yourself. There are some real dumbass's out there. Insurance is def the go.

Get the head shaved for higher compression. or 3K head. What mine used to run.

I used to toast 15's in my 4k ke30. mind you that was with a manual, starting in first and kept them going into 2nd. Try it on a dirt road where the shoulder cambers off. Put the car parallel to the shoulder. wheels slighty turned towards the road. Apply brakes and throtle. when the wheels get spinning they should dig themselves into the gravel a bit. this and the camber of the road holds the car where it is without the need to fry the rear brakes. After a bit more spinning the wheels should hit the harder rock, then they should begin to smoke. Rinse and repeat as required. I take no responsibility for any fines, impoundment, damage to the slushbox or stone chips from stones flying at warp 9 caused by following the information as descrided above.

Hmmm :sob: , nah. Spotted Mitch on King William Rd this arvo at about 4:45pm.

Have spotted ROL030 parked in a side street just off Brighton rd in the glenelg-ish area. Looked good. As for your wagon, almost everyone that see's it would be blown away. Seen the owner of a Turbo 5k ke30 at seaford on Saturday night. only just met him that night but have seen his car previously. apparantly its a very quick car. wouldnt expect it tho.

Ive seen little compressed air engines like that but never proper internal combustion. Well done :sob:

I'm an apprentice doing a fitter and turners apprenticeship aswel. It's a great trade to get into and the possibility of branching out into other trades. If anyone from RC applies for this, i wish em luck :sob:

Got me CD today :wink: Just two of many:

Really coming together man. Gonna love seeing this on the street

Will be keepin an eye out down my way. Not many AE82's ya see with 17's. Hope ya get it back in one piece.

By the looks of it hes into them. Maybe just ke25's.

Me ute came from Vic. Picked it up with Vic rego, drove it round for a bit. ol man took it down the the marion cop shop for an ID check and rocked up back at home with SA plates and full rego. The guy that did the check also offered to buy the thing then and there :wink:

Spotted a Yellowy/Greeny KE25 at the Roundabout in Blackwood approx 5:30. Entering and leaving roundabout via Main Rd. Almost missed a gap in traffic as i was busy havin a geez :wink:

Good to hear.

UPI will do 4 stocker for $44 least yo know you'll have a set if you need them