AExx Corolla Discussion
1398 topics in this forum
-
Hey to all, I have a really good 4ac motor in my little AE71 with only 92k on the clock, now I will be doing 20V conversion very soon but I will be putting the old 4AC into a wagon or something like this. I will be using it as my daily once I have my 20V conversion complete. But I want to know who has a 4AC and what mods they have done to it and were they happy with it or not, I’m thinking more along the lines of internals. I’ve already sourced a nice exhaust and extractor setup and I have my 32/36 DGV ready to go on. I have done, 1. Electronic distributor (fireball xr700) 2. New eagle one 8mm leads 3. New clutch (master, slave, belt, plate) 4. Water pump …
-
- 9 replies
- 6k views
-
-
I bought a replacement boot/tailgate door for my seca and now i want to paint it. There is nothing worse than seeing a masked line of paint right next to the rubber and not to mention the pain in the ass it is to mask it up so i just want to remove it. Can i take it out and if so, how do I? I want to reuse the glass again to smashing it is not an option. Johno :locked:
-
- 6 replies
- 3.5k views
-
-
Hi guys, just wondering if anyone else has or had the same problem. Issue: over a year ago i bought a 91 GTi corolla with 17" vault rims with new tyres, current size with tyres are 205/40/17. The tyres weren't that great as they were some china brand which didn't last very long, they started to crack around the rubber and lead to air escaping. I then changed 2 of the tyres (back pair) for a set of falkens, which was only about 2 weeks ago, and now on one of the tyres, it keeps getting flat. The other one is fine, so i took it back to the shop and they said that i have a leak in my rim, which they tested by putting it in a bathtub full of water and showed me the w…
-
- 13 replies
- 5.3k views
-
-
Hey all i've recently bought a rather healthy ae112 sportivo turbo,I want to keep it that way but,i also want to get the most from it without playing with the internall's, Any ideas would be great.Thank you
-
- 11 replies
- 12k views
-
-
while browsing some old jap rims on Google i could`nt help notice an aussie importer of used Jap parts and here i found some nice 2nd hand JAP mags set of 4 mags or pairs. might be some interest to others?what do you think? Auto Bahn 14x6.5 +5.5 set powder coated matt black $400 http://otomoto.com.au/wheels/IMG_4324.jpg Bilbo 14x7 +0 and 14x7.5 -5 extremely rare, stretched 175 tyres $900 set http://otomoto.com.au/wheels/IMG_4325.jpg Hoshino 14x6.5 +14, 14x7 +7 set http://otomoto.com.au/wheels/IMG_4268.jpg sizes ranges from 13" to 15" what you think or add it to your wish list? visit otomoto.com.au
-
- 2 replies
- 3.3k views
-
-
Hi, I recently purchased an old 1990 corolla SR5. It had no service history and was running like a dog when i got it, really bad idle, and gutless and guzzling the petrol. I took it in for a major service, they tuned it up, changed the air filter, oil filter, fuel filter and spark plugs. The mechanic said that he doesn't think the fuel pump had ever been changed. The car runs well now and idles properly and drives with a lot more power. However it is still guzzling petrol, I get about 370-380 k's from a full tank, and that's if i run it dry. The car is fuel injected 4 cylinder 1.6, my mates corolla which is older than mine gets over 500 k's to the tank and he has a carbur…
-
- 4 replies
- 3.3k views
-
-
Hi there, I am picking up a 20 valve ST very shortly and it still has the box attached. Just wondered which model the box is, is it C56, C52, etc?? I have no idea with these models. Thanks Luke
-
- 7 replies
- 2k views
-
-
I am interested in getting a 2001 toyota corolla sportivo turbo. Since the engine is stock AE112R with a turbo and intercooler added, i woudn't add any boost to it. But instead I had a plan of putting a bigger front mount intercooler ( any recommendations brands or 2nd hand oem from others cars ? ), shorter intercooler piping (with mandral bends) but larger in diameter on. And to put a pod filter directly onto the turbo. This way extra no stress is added tothe engine but just free up whats avaliable, what do you think ? and what gains would be able to be had ? also with these mods would a retune be nessaccary ?? i also toyed with the idea of an exhaust but i don't wa…
-
- 12 replies
- 20.2k views
-
-
-
Hey guys, recently I have been getting water in my car (91 corolla) and its dripping where the peddles (clutch, brake and accel) are located, but I can't seem to locate where exactly the leak is originating from. Specifically it happens on rainy days. so I just wanted to ask, is this a common problem? does anyone else have the same problem and how did you fix it? I asked a mate and he said it could be a leak from the windshield? any ideas and opinions/solutions would be much appriciated! regards, D
-
- 13 replies
- 5.6k views
-
-
Are there any manuals especially electrical manuals on line to view for a 90 corolla sedan?
-
- 0 replies
- 1.8k views
-
-
ok so heres the story ... a lil while back we threw a head gasket on the girlfriends car so i replaced it ... threw another on a few months later so this time the mechanic had it and the head had some work done including all new valves. now before it went to the mechanic it never blew any smoke and ran a real dream but now its back from the mechanic and it smokes heavier than a pack a day smoker, lots and lots. the question is, is there anything that could have gone wrong when they did the work on the head?
-
- 8 replies
- 3.9k views
-
-
hi guys, I'm in the market for a new carby, i have come across a few carbies but am interested in a single 32/36 weber. just curious if there any possible way of telling if its a 32/36 weber or a plain 34adm models from the old ford falcons? heres a few pics i found from some for sale links, just want someone who know there stuff about weber carbs to identify if they are te real deal of not! ok here the first i found http://i16.photobucket.com/albums/b44/toyotaz/IMGP8729-1.jpg http://i16.photobucket.com/albums/b44/toyotaz/IMGP8730-1.jpg now the second appreciate the help guys
-
- 6 replies
- 3.3k views
-
-
Came out to my car parked on the driveway... then saw that some f@$ker kicked my front guard and rear door..... now theres 2 huge dents that can't be repaired by the normal dent removers... so i have to get them panel beated and resprayed..... I'm so embarrased to drive it around that i went out and bought a bunky!!! Here's the pics of the damage, don't think the pics do justice....! GRRRR 1990 AE92 Toyota Corolla SX with red top 100kw engine! has all the stuff such as a/c, p/s, cd player etc! leaks no oil!! Cons: clunk when shifting a bit fast( i think a bush somewhere...) steering feels very vague, owner said its the bushes... its like ( do…
-
- 7 replies
- 19k views
-
-
Howdy folks. I'm asking this on behalf of Johno, as he has no access to a computer, but we're not sure as to if there are any differences between the hatch and the seca fuel tanks. My reckoning (looking at the ae9x example) would be that there are no differences as the floorpan where the tank is, is identical between models, however, the placement of the jack is different, as the tyre in the hatch is positioned closer to the tank. Any clarification would be greatly appreciated. Cheers in advance Andrew
-
- 3 replies
- 4.1k views
-
-
Hi guys, tried to search but couldn't find what I was looking for. I just bought a 1990 AE92 Corolla SX Hatch 4AGE with 155,000 kms done. It didnt come with service history so i want to change all the oils and fluids. My question is, which engine and gearbox oil do you guys recommend for your 4AGE engines? Thinking of using the 10w30 Redline oil for the engine and Redline MTL for the gearbox. what do you guys think? Cheers
-
- 6 replies
- 5.1k views
-
-
gday all.... i have found some cheap coilovers but they are off a AE92 rolla.... do the ae92 and the ae112r have the same suspension setup up or are they completely different? cheers guys.... rhys
-
- 10 replies
- 5.1k views
-
-
Hi All! I am a 4th year apprentice so I don't need the baby steps but ... I have a 1991 AE92 to fix for a mate on the weekend and I thought I'd pick your collective brains as to some repair items for which I have no reference. I searched and could not find the answer on here either. Ok - I am doing a timing belt and water pump, thus I will be replacing the cam and crank seals. I would like to hear any tips or tricks you people have experienced with this job. The biggie! What kind of adjustment is available on the valves on this motor? What are the clearances? Cheers all!
-
- 5 replies
- 5.8k views
-
-
Ok I have just bought lowered springs for my AE71, two inches all round. I am wanting to replace the shocks at the same time to save work. Apparently not many (or none) places make shocks for AE71. There must be another Toyota alternative. Does anyone know which ones I buy and if I have to modify anything what do I need to do?? PS. I do not wish to replace whole strut assemblies etc as I already have the springs etc. I bought them brand new so changing them over is not feasible.
-
- 8 replies
- 5.5k views
-
-
-
Hi Everyone, My dad is trying to help out a mate who is having some cold starting issues with his 2001 corolla. When the car is cold, it takes a lot of revving and a lot of attempts to get the car started. Once its warmed up, you can turn it off and restart it without issues (at least not until it cools down again). Dad has already replaced the fuel filter and spark plugs, but it hasn't helped. He's now thinking the problem may be with the automatic choke/fuel injection. Has anyone got any ideas, or experienced similar issues as above? If yes, what was the solution? Cheers, J
-
- 7 replies
- 15.2k views
-
-
My 1997 Conquest didnt come with an owners manual, so I am not sure where the jack points are. Where exactly can I jack the car up from the front in order to do an oil service. Can some please scan a photo from the manual? Also where is it safe to place the jack stands? Cheers
-
- 5 replies
- 12k views
-
-
Hi guys... need help on my 4afe. Mods as follows: 272 cams intake exhaust ported and polished head - shaved 50,000 of a mm. toms ecu - no revlimit 4-1 exhaust manifold - equal lenght - stainless problem is... will there any valve or valve springs I can use to replace factory ones. or will any valve from any other engine fit in 4afe head? I'm having problems in 7500 rpm... valve float. can you help with this. o and I finally made a mating manifold to fit a 20valves ITB to 4afe head. I hope emanage can help me tune the engine. hehe. any suggestions? thanks.
-
- 33 replies
- 236.8k views
-
-
Hey guys, Can you tell me where the oil filter and fuel filter are in this car. (4afC) I looked in the faq but couldnt see it for the A series engines. I think I know where the fuel filter is, as in pic: (this is not my car, and is not exactly the same but is similar) As for the oil filter.. i know its under there somewhere. Thanks, Adam.
-
- 5 replies
- 19.6k views
-
-
Can a toyota factory ECU for a 4AFE be re--mapped? if yes what approx cost will it be and where could I get it done thanks later P
-
- 8 replies
- 3.4k views
-
-
Hey guys! long time no post haha Well the time has come for me to add the power of a turbo.. i am just interested in if any people have links or know of people with turbo carbie set ups.. id like to do some research first.. All help is welcome thanks in advance Tory!
-
- 6 replies
- 13.6k views
-
-
Does anyone know how to fit in a Front bodykit into a AE95r wagon rolla, i got the kit off a ae92sx but didnt come with any bracket mounting, anyone in SA Adelaide know how to do so and would liek to give me a hand installing my kit, ??
-
- 4 replies
- 4.2k views
-
-
Hello all! I have recently become the legal guardian of a 1990 model AE-91 running a stock 4A-FC and 5spd. I remembered back when I had a KE-55, I was planning on sticking a 2T-G in there with a pair of Mikuni-Solex carbys found at a mate's workshop. Word it they used to belong to a Tercel. They were an early to mid 80's model. I have since lost the '55 and I am unsure as to the availability of the original pair of carbies ... However, My questions to you all are thus: What Tercel ran twin Sidedraughts? Is there a twin, sidedraught or otherwise, setup that is easy to transplant to the 4A-FC? I can do all my own work but I don't like to fabricate; th…
-
- 1 reply
- 1.6k views
-
-
-
I drive a 1997 Corolla with 161,000 on the clock. The car didnt come with the owners book so I am not sure which type of oil grade to use. My mechanic uses Penrite and the car is currently running on Penrite and it drives overrated so I want to stick with Penrite. Penrite HPR10 is 10w-50 - is this too thin for a 11 year old car? Or should I go for HPR15 which is 15w-60? Also what is the oil capacity for a 1997 Corolla Conquest 1.8L? Cheers
-
- 6 replies
- 6.6k views
-
-
hay guys/gurls what suspension mods can i do to get a nice all round street/drift AE71 i've already chopped the springs i'm goin to get better springs wen funds allow!!!, i was thinkin sway bars, strut brace, nolathane bushes all round, stiff shocks mayb coilovers if anyone will make them, the engine and gearbox is gonna be a 4age and 5speed. please giv any advise or suggestions.
-
- 5 replies
- 2.7k views
-
-
Hey guys I'm after a AE112r turbo extra long sump plug for oil return with fitting for my 4agte for an easy oil return. can anyone help me find where i can one form? or anyone have the plug and fitting for sale? I'm in south australia for local shops. cheers, davey
-
- 16 replies
- 5.4k views
-
-
Advice needed. First, the car is a 1992 Series 2 Toyota Corolla SX Seca 5 door hatch. The compliance plates give the following details. Build Date 02/92 Model Number AE92R-LMVFB Gearbox C52 Axle -642 Engine 4A-GE Capacity 1587cc VIN ST164AE93............. Now, I read somewhere that the AE93 in the VIN (instead of AE92 as in model number) says it is a genuine SX Seca. Is that correct ? Now, for the problem. Yesterday (last night) I was driving home from christmas with family, with cops everywhere (saw at least 5 in as many km) so was being extra careful in the speed department, checking speedo every other 10 seconds or so, when all of a sudden,…
-
- 4 replies
- 10.2k views
-
-
Hey guys, just a few questions someone might be able to help me with. If got a 1994 AE92 CSi Limited, and i just noticed the other day i need new brake pads. When i took my wheels off to look at the discs i noticed i had solid discs and they were kinda worn a bit funny, so it got me thinking. I noticed that new discs arent that expensive, so i was wondering, if i were to put new slotted and ventilated discs onto my corolla, would i really notice an improvement? I'm not gonna lie, I'm a fast driver, ive got a new 2inch exhaust fitted on my rolla so i like to hear it roar :D Thoughts.....?
-
- 3 replies
- 2.5k views
-
-
hey all ive just received the d2 racing coilovers kit today now the thing is on the box it say clearly that its for a AE86 and the part code is t08 and thats the ae86 kit but what i received is different than in the picture. the front ones are the same its the rear instead of reveiving the sam and just the top and the bottom are different i got the strut that i think fits perfectly. but the spring isnt sitting on the strut but seperatly were the stock spring on the car sits does anyone knows if its suppose to be like that or they send it wrong thank you by the way.sorry if i made somekind of mistkae i new here thanks!
-
- 4 replies
- 2.5k views
-
-
hay guys and gurls will a ta22 pedal box fit into a ae71?? has anybody tried this before??
-
- 1 reply
- 1.5k views
-
-
As above.... I have found a pedal box but in a panelvan and I want it for my sedan. Surely there would not be any difference?? Advice please...............
-
- 3 replies
- 2k views
-
-
Hey everyone my names Pete I recently did up a Datsun 620 ute then on the way home Monday someone pulled out in front of me and I wrote it off. Anyways Corolla's are waaay cooler so I'm going to start a project on one. The datto had an L20B with mild cam and 5 speed ready to go in but now I'm going to sell them and scrap the car then buy a corolla. I'm going to drop in a 4AGE and respray the car not sure on colour yet any suggestions? My sister had a 1983 ke70 XX 5 speed sedan which she sold about 6 months ago for $800 and I'm soo annoyed because I wish I bought it cause it was in such good nick. Apparently someone in Qld bought it but then my sister got a red l…
-
- 3 replies
- 21.8k views
-
-
Hey everyone, I am new to this forum... Just lately I have been looking at the 2001 Corolla AE112R Sportivo Turbo's, and I just wondered what they are like? How they respond to modifications? How much more boost can they handle? Are the gearbox weak? I was thinking of purchasing a stock standard, and putting an exhaust on, CAI, Bigger front mount (NOT a HUGE one), some coilovers and what ever else i think of. Try and keep it reliable but responsive.
-
- 5 replies
- 3.8k views
-
-
Hi Have a 1988 AE95R with 350K on the clock don't have the coin for a 20V conversion and from reading here cannot do a drop in of an AG becasue of the block cutout issue. I can pick up a complete 4AFE and ecu etc for not much coin at all- sub $100 or close to it what can be done to the 4afe to give me a bit more torque mainly and HP if it happens the car is used for a daily driver/ fun bush bus- but with some camping gear and kids in the back it just doesn't go anywhwere fast I know sticking with the AFE engine it still wont be anywhere fast-- maybe just not SO embarrissingly slowly. so I throw my horribly inadequate knowlede on your mercy…
-
- 8 replies
- 3.7k views
-