AExx Corolla Discussion
1398 topics in this forum
-
hey all, the clutch in my AE112 is on its last legs an needs to be replaced. I'm currently leaning toward an Exedy heavy duty clutch, but I'm just after some fellow corolla owners opinions and suggestions on what you think i should replace the standard one with.http://www.rollaclub.com/board/style_emoticons/default/hmmmm.gif Its got a full sports exhaust system, k&n air filter, NGK iridium spark plugs, Top Gun Performance ignition leads. its gonna be taken in for a tune-up soon and to get the timing advanced a bit, but, all this is pointless at the moment coz I'm losing power through the clutch. Cheers Guys (And Girls)
-
- 16 replies
- 9.4k views
-
-
Hi there, I have recently acquired a Holden Nova with a 4AGE BT conversion done to it for a bargain. Has some damage done to drivers side front and rear door which I will be fixing. A few questions I have tho are: 1. After inspecting the engine it seems like a stock engine with no mods. What can I do to increase this better. 2. How do I go about putting a strut brace on as there looks to be very little room for one? 3. Has lowered springs already (Kings Lowered by the looks) which is fine but I think I will need new shocks soon. Any recommendations here? 4. Anyone know what gearbox the BT comes with as I might look into an LSD for it if it is possible?…
-
- 1 reply
- 3.5k views
-
-
I have a 20V motor with a t50 box in a Clubman 7 car. I want to use the 20v reduction starter re- located to the driver’s side of the box as I have two lying around. The starter on the LHS is getting fried by exhaust headers. Unfortunately I do not have the 20v FWD box to cut (butcher) the starter motor bulge/housing from, and weld to the T50. Does anybody know if any Australian delivered car has the same starter motor housing bolt pattern as the 20v? Or does anybody have a 20v box that I could butcher for the job? My location is Brisbane Western Suburbs. Any comments or advice appreciated.
-
- 7 replies
- 4.1k views
-
-
hey guys gotta question.. recently i heard from a mate that putting a sports exhaust on the AE92 4A-FC engine, reduces the output power.. I'm wondering if this is true or not
-
- 2 replies
- 2.3k views
-
-
I'm hoping someone will be able to help me out here! I recently got my car serviced for 120,000km and had the clutch fluid replaced. It was going awesome after the service, then about two weeks ago the clutch started playing games. First it was sticking slightly whenever i lifted off my foot, which is really irritating because its hard to take off the line. So i came home and spoke to my father and the only thing we could come up with was a possible leakage in the clutch fluid, but it wasnt leaking..... the next day, it was fine :) Then suddenly about 3 days later, more clutch folly, this time the clutch felt like a sponge and i didnt feel like i had any control over…
-
- 1 reply
- 2.1k views
-
-
ive put a front strut brace on my 1991 ae92 seca, i can already notice the difference but was wondering if anyone had advice on what i should do/get when i upgrade from my factory shocks and springs, and also if thre is anywhere to maby find a rear stabiliser bar? thjanks
-
- 1 reply
- 2.1k views
-
-
-
Hey all Just a few questions regarding the timing on a 4A-FC engine. :) If i was to change the timing, how much would i have to advance or retard the the timing? if i advance it will i get more acceleration? and if i retard it what will it do? any benefits or no benefits from doing any of these?
-
- 3 replies
- 3.5k views
-
-
On Sunday I noticed that the front right tyre (when sitting in drivers seat) was flat. The four tyres plus the spare are only about 6 weeks old. So I pumped up all the tyres to 30psi. On Sunday evening the front right tyre got flat again so I put the spare on thinking the tyre had a puncture. Tonight I checked the tyre again the the front tyre was at about 11psi and the others dropped to 27psi. What could be the problem? I was thinking the rim might have a crack, but the spare is on at the moment, so I doubt both the spare and the initial rims would have cracks. Any ideas? The car is a 1997 Conquest if that helps.
-
- 6 replies
- 3.8k views
-
-
hi guys...new to the rollaclub and wondering if there are any AE112 owners in WA from the forum?so we've got at least some contacts here in WA to do up our car :P a big hi to all other AE112 owners out there cheers Adrian
-
- 14 replies
- 17.8k views
-
-
just wondering what suits , bog rear end ae71 if anyone can help please post if u have hole diff setup or axles for sale please pm my
-
- 0 replies
- 1.3k views
-
-
hi guys. i have a Toyota Corolla SECA CS-X 1990 with the 4A-F carbed engine. Just recently i found video of this cars exhaust. The guy that installed the performance exhaust on the SECA claims that: "The engine wasn't designed to have a cat in the exhaust system, so it gains about 15 horsepower(I am not making that shit up). The power gain after removing it was ridiculous." I'm wondering if this is true before i do any exhaust upgrades. Is it illegal in QLD to not have a catalytic converter?
-
- 4 replies
- 2.5k views
-
-
Hi. I have some shocks/struts on my garage, and i want to find out if i can put AE86 springs on my KE70 1979 with the struts of the TE71 SR5. The diameter of the spring plate on the KE70 is around 14.5, and on the TE71 16.5. AS well, the outter diameter of the strut (where we put the shock in right?) is 5.5 on the TE71. SO maybe i can use springs and shocks of the AE86 ? Thanks a lot
-
- 2 replies
- 5.7k views
-
-
hey guys got a base model ae92 seca and got a sx strut brace I'm installing, i know i need to drill 2 holes in the fire wall for the 2 bolts/ screws, and tips, ideas or suggestions as to what way to do it. thanks
-
- 3 replies
- 3.8k views
-
-
Ok, call me crazy but is it possible to fit a set of 4AGE carbs on a 4AC???? :wink: like these........
-
- 5 replies
- 3.6k views
-
-
Ok so I am a bit stumped over what will turn out to be a simple answer for someone on here. What size leads do I need for Silvertop 20V. Thickness etc? I enquired at an auto shop and they only gave me the no. for a direct replacement and these will be too short for my application. This is to be run in an AE71 with aftermarket ECU, Bosch Coils (individuals) etc. They need to be longer than stock. Can anyone help? Thanks Luke
-
- 4 replies
- 2.3k views
-
-
started just tonight when driving, when letting the accelerator go i can hear a knocking noise from underneath, i was thinking that one of my rims could be loose so checkd all the bolts tight as. then thinking its the 4wd system (when u activate it from the car) turneed it on drove straight and when letting go the pedal still got the noise. turned it off and still made the noise, try going fater to see if it would make a diff, around 80kmh letting go it knocks like hell. thinking its the engine i rev it in N but noting, thinking its from my drivetrain somewhere or my cv joint so i went around a roundabout going around to see if it could be the CV's but it wasnt. has this …
-
- 0 replies
- 1.9k views
-
-
So heres the low down, cylinder #1 is giving me major troubles. It seems though the piston is hitting the spark plug. (Ie thread name :jamie: ). I have double and tripple checked they are the right plugs. I have double checked the distance from the piston to the start of the spark plug thread (TDC). I have cranked it over, the spark plug does not hit, only when it is fired up does it manage to start chewing on the plug. Totally stumped. I was thinking maybe a lose conrod cap ? But wouldn't that be noisy as hell, there really is no death rattle noise when it is fired up. I'm totally perplexed what to do???
-
- 34 replies
- 44.5k views
-
-
Hi guys i just need to know the thickness of the TVIS plate from the bigport intake, as i don't have one here, and need to make some measurements for clearance in my ke10 thanks for your help cheers darren
-
- 1 reply
- 2.4k views
-
-
Hi. I have some shocks/struts on my garage, and i want to find out if i can put AE86 springs on my KE70 1979 with the struts of the TE71 SR5. The diameter of the spring plate on the KE70 is around 14.5, and on the TE71 16.5. AS well, the outter diameter of the strut (where we put the shock in right?) is 5.5 on the TE71. SO maybe i can use springs and shocks of the AE86 ? Thanks a lot
-
- 1 reply
- 1.5k views
-
-
Hi all just want to know (Laugh at me if you will) if i took a seat out of a sprinter will the seat fit my 71 rails??
-
- 1 reply
- 3.3k views
-
-
I have gone through the FAQ and have looked on google but no cooling system guide suggests what top hos to use when putting a JDM 4ag into an AE71 with the AE71 radiator, Can anyone help as I wanna buy them before the weekend.
-
- 1 reply
- 1.8k views
-
-
G'Day all, I'm running an AE71 with a 3.9:1 Differential on it, I have a rear axle with a 4.3:1 Diff on it and i was wondering if there is any advantage in putting this 4.3:1 Diff into the car??? Known Advantages and Disadvantages would be appreciated. Thanks.
-
- 8 replies
- 4.4k views
-
-
Guys. Are ae82 rear doors the same for Seca and hatch
-
- 2 replies
- 1.8k views
-
-
just after some parts for my ae71, needing a 4AZE loom, and a supercharger
-
- 2 replies
- 1.4k views
-
-
hey just wondering what i need to put the lsd GB out of a AE101 into my AE92 with a 4AGZE in it? i heard i needed a different drive shaft any help would be much appriciated
-
- 6 replies
- 9.7k views
-
-
Howdy, My first post....have a Silver top 20V in the 5 dr seca and its getting a bit tired and was wondering if anyone has recently rebuilt one and if they could give me an idea of the cost and any mods done to a similar engine. Cheers - Troy
-
- 12 replies
- 3.4k views
-
-
Just an idea me and my mate had, do you think the ae92 gtz trueno front end panels and lights would bolt on to a ae92 seca? I think it would look pretty different. And cause there would be a lot of panels floating around from all them 1/2cuts. Anyone else had this idea?
-
- 12 replies
- 7.7k views
-
-
The previous owner of my car has installed a new coil, annoyingly - not the right one :hmm: . Problem with the current coil is that the it has the wrong connection for the lead and it is only mounted off of the one mounting hole. As you can see in the picture below, I am currently getting by with elastic bands to hold the lead on the coil - not a situation I am comfortable with... speed bumps have caused the lead to jump off a few times now. I've tried a bunch of automotive stores already, and haven't gotten anywhere - they don't have the right coil listed in their books. I dropped into Toyo Spares the other day, had a chat with one of the fellows there... he recko…
-
- 7 replies
- 18.7k views
-
-
-
hey fella's, ive got an ae71, just wondering if an 1.2 nissan engine would fit straight onto my 5 speed manual box. as my 1.6 is not soo cool, and this 1.2 has twin webbers seeing if it would work. would i need an adaptor plate.
-
- 13 replies
- 4.6k views
-
-
hey evey one topic if for my 4age 16V i just bought some 2nd hand 8mm leads in good condition and was puting them on my dizzy and they seem to big :P can i use a diferent dizzy cap, are they interchangeable? or do i need a diferent dizzy? any help will be great full also if any one has a spare 16v dizzy cap to suit the 8mm leads imd be interested? I'm located near blackwood :hmm: SA cheers....
-
- 3 replies
- 1.8k views
-
-
well all of this started a few days ago, my dad was driving my car then the AC suddenly stopped working. so when he got home i popped open the bonet and had a look and found that the black compressor wire from the compressor had come loose from the main wiring harness. so i put it back in and taped it and it started working again the next day the compressor suddenley stopped working again but the cable had not come loose, so today i cut the connector on the main wiring harness and decided to run a new wire from the compressor to where the connector used to be(can be seen in the pic) but the compressor still wont turn on. is there a fuse or something i can check becaus…
-
- 4 replies
- 2.4k views
-
-
Putting the final touches on my 4age and my mates stuck on some wiring issues, can't quite get it to kick over. Was wondering if there was anyone in brisbane that has an ae92 sx corolla that we could come out and look at or come visit us in camp hill, will fix you up with fuel and whatnot. need help asap Failing that, anyone that has some experience with a redtop wiring harness.. thanks guys nick 0423 357 938
-
- 0 replies
- 1.7k views
-
-
I wanna put air con in the seca, I'm guessing its a big job to pull one out of something like this http://cars2.ebay.com.au/Toyota-Corolla_W0...emZ200320162390 and put it in my car. I don't need air con until summer now but its not a good daily driver when it gets hot (its always hot in QLD) or I could stop being a pussy and forget about air con
-
- 15 replies
- 16.8k views
-
-
I got a ae92 4agze with fmic now I really wanted to upgrade to an turbo what work would be involved and roughly cost as well to get it done? If anyone could point me to a place that would do it in sydney would be appreciated. thanks guys
-
- 13 replies
- 4k views
-
-
Hey, i have a 93 corolla csi with a 4afe, the belts r really squeeky. it started off with only a slight squeal when i started it up in the morn. then moved onto heavy sqeual with the aircon on, and now when the steering wheel is at full lock as well. they all seem to go around the same pulley so maybe one affected the other?? well anyway my question is how do you tighten them to stop the squeal? and do i need to tighten them all or just one? my gf is taking her driving test in it real soon, so i just want nothing for the tester to pick on. thanks.
-
- 4 replies
- 2.6k views
-
-
Hey all. I have an Ae82 twincam I'm parting out. My mate got an AE93 twincam come into his work with a busted 2nd gear syncro. They are trying to find a replacement but having no luck, especially in the realms of realistic prices. So just wanted to know will the gearbox bolt into an ae93? I know it will bolt up to the motor no problems, just not sure about the mounts, driveshafts etc. Also what is an ae82 gearbox worth? i know it will only be worth as much as someone is willing to pay but just want a guide to go off. If anyone can shed some light on this it would be great Cheers Jake
-
- 3 replies
- 3.3k views
-
-
I'm going to upgrade the computer system in my ae82 so I can eventually get bigger cams. Anyone know what type of money ill be needing to get one? its a 4age twincam 16 fwd also could someone tell me about extractors? should I just get extractors for now or go with the computer system first?
-
- 2 replies
- 1.8k views
-
-
gday fellow rwd toyota loving enthusiasts. right quick question for you guys who have purchased a new gearbox crossmember rubber mount for your T50 box (either in a ae71 or 86) well first off the problem...my t50 didnt come with one! so i figured order on through repco i got a "kelpro" branded one for like 30$, code MT8019. it looks like this yep totally wrong part since i have to bolt it to this now the problem is the kelpro website lists this part number for both the ae71 and the ae86. both 4ac engines. you can look it up on http://www.motospecs.com.au, but youll need to sign up. so what the dickens fellas???? anyone ord…
-
- 8 replies
- 13.5k views
-