Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by Kimby,

    We are new migrants from the USA, had to basically give away our 2 vehicles there, and thought we had found a great deal on a 1991 SECA liftback with under 195000 kms, good maintenance records, from a nice family (was the girls' car, bought from an older lady who maintained it like nuts). We've had it for less than a month, took a big drive up to Copacabana beach from Normanhurst, all great, then it overheats on a trip to the CBD. We put a new thermostat and radiator in it (the radiator was obviously cracked under the cap). All to no avail. Seemed like coolant getting into the engine (sudden yucky white smoke, and I reviewed the topics here carefully). Sure enough…

    • 13 replies
    • 5.4k views
  2. hey guys, before i start taking off the extractors, would like to know if these extractors will fit stock dump for my 4age with no modifications? Also i bought a gasket for the dump that has two seperate rings. is that right? Thanks http://img687.imageshack.us/i/sl372475.jpg/ http://img810.imageshack.us/i/sl372474.jpg/

    • 5 replies
    • 3.3k views
  3. Hi all, Recently some scumbag screwdrivered my girlfriend's AE112 Corolla's (hatch) fuel door open in an attempt to siphon out some fuel. He was unsuccessful but managed to mangle the fuel door in the process, and snap off the small locking mechanism as well. I've bought a second hand fuel door and am looking for tips on how to fit it. The door assembly appears riveted to the body, but I'd like to avoid drilling out the rivets and re-rivetting if possible. Upon closer inspection the door's hinge is a long pin with a 90deg bend on the end, but the bent bit is tucked under some metal on the inside of the fuel door. Can this pin be turned so that the pin can be pulle…

    • 0 replies
    • 3.1k views
  4. Started by street666,

    Hi all i have recently brought an 85 rolla hatch and it seems to die down around corners just wonderin if anyone might be able to help me thanks

    • 1 reply
    • 1.4k views
  5. Started by Josh_04,

    resolved, head just blew cheers for the help peoples

    • 10 replies
    • 6k views
  6. Started by hilux05,

    Hey guys.. I've got a nice big crack in my ae71 sedan windscreen and i'm just wondering if anyone knows for certain if ke70 and ae71 windscreen are interchangeable?? Secondly, has anyone had to get someone to replace theirs (ke70/ae71 only)?? Who'd you use and how much?? I got quoted $340 from O'Briens.. Might ring a few more places in the morning.. Cheers.. Richie.

    • 2 replies
    • 2.4k views
  7. I just got a quick question here if anyone could give me some insight. These pictures are from an AE92 Corolla. does anyone know if the metal bar connected on the front part of the chassis is illegal to trim down since I want to fit an intercooler? I don't want to cut or chop the chassis or anything that will affect roadworthy or rego inspection since I still need to pass rego inspection for the car. I have attached a pic to show the exact part I am talking about. If i can trim this metal bar, that enables me to fit a bigger intercooler behind the front bar without chopping my front bumper(something I prefer not to do) Also, can anyone tell me if there is…

    • 5 replies
    • 12.6k views
  8. Started by rollake70,

    hey guys this goes out to all exhaust specalists! just recently got a new exhaust right changed from my standard 1 the new system consists of - 2" system - Resonator - SuperHi Flo Catback muffler - Sports Exhaust with 3.5" chrome dump pipe the car is acting VERY weird since ive got the new exhaust, when i am driving along and then i want to plant it/flog it/foot flat down lol, it will go put put put and the revs will go low but then the car will slowly climb and go hard?? its like theres no power or horse power but the system should be making it better not worse? any help would be great, the only problem i can think of is mabey the carby needs rejet…

    • 11 replies
    • 3.5k views
  9. Started by twisted2,

    I'm chasing a part number for a internal seal on 4age disy (its out of ae82)

    • 4 replies
    • 1.8k views
  10. Started by mutley,

    HI Guys I am a newebie, so be gentle with me LOL. I have recently bought a 1990 seca liftback AE 93.5 spd twin cam engine. 214000k's. its a bit of a ruffy!!! i have a couple of questions. the engine is doing 3300 RPM @ 100KPH in 5th gear is this normal? as it feels like it needs another gear. it has 185/60/14 wheels. It runs rough when it gets hot any ideas on why and what i need to do to fix? also it needs another bonnet is there a variety of models(sedan?) that use the same bonnet or do i need to get one from a lift back? Also i wiould like get pair of front seats are there seats out there that will bolt straight in that are more comfy? Apart from that its a gr…

    • 25 replies
    • 35.1k views
  11. Started by LowVp,

    is it me being blind but it seems my ae82 is lacking a front sway bar, was it an option for top end models?

    • 5 replies
    • 8.9k views
  12. ok so i just bought an sx corolla with 4age small port.now some dude has done quick home job on the pod filter.there are a few things hanging around i would love it if someone could identify these for me as i don't no how important they are. please help anyone? and this one is the lil blue plug thats not connected to somthing? this one is the little black pipe on top of the red air flow pipe and this one is of what looks like a sensor of some sort?

  13. Started by gwallo,

    Hi all, First time poster, so go easy on me! After 10 years, the wife has finally decided get rid of her 1990 Corolla Seca and I'm trying to get the old girl roadworthy. The problem I havng is that I'm buggared if I can figure out how to get the passenger side mirror off. The mirror is cracked right down the middle and needs to be replaced. I assume the back cover pops off somehow but can't seem to figure it out and I don't want to force something and break it. Any tips would be greatly appreciated. Thanks

    • 3 replies
    • 6k views
  14. Started by guyanarolla,

    I just picked up an 83 rolla with 71,000 original miles. I want to put 205 50 13's on it. Looking for American Racing Libra's or something along the lines of Rota Rb's or Koenig rewinds. Do I have to make any modifications and what is the correct off set. Secondly, I would like to lower it about 1 - 1.5 inches the correct way. Can anyone recommend some springs. I am on a low dollar budget.

    • 2 replies
    • 1.5k views
  15. Started by Johno,

    Hey, I had a idle hunting problem when i installed the 4age and fixed it by bleeding the cooling system. It just started hunting again a few days ago and got really bad tonight. The temp is up slightly. I tried to bleed it again. This is what I did and no luck :hmm: I parked the car on a hill with the front of the car facing up hill I opened the radiator when hot - all good I cut a coke bottle open and used it like a funnel I taped it to the opening of the radiator so there were no leaks I turned the heater on and started the engine.. The radiator filled the bottle up about half full with coolant, The car started to idle hunt 1000rpm to 2000rpm repe…

    • 20 replies
    • 44.1k views
  16. Started by andy2004,

    hi all just wondering if anyone can help me out here i just bought an sx corolla and it has a small port engine only mod so far as i no is a pod filter.now when I'm driving say at 50 kms i put the foot down and it jolts then blasts in to its revving.kinda hard to explain its like when you do it to an automatic.my theory is its running to rich and its putting way to much fuel in when i plant the foot? anyone had a similar prob or may no the reason?

    • 8 replies
    • 2.7k views
  17. Started by twisted2,

    yes another question about running twin side drafts what aircleaner set up are you guys running on your rolla or recommend??

    • 4 replies
    • 1.7k views
  18. Started by twisted2,

    hey guys just wondering if anyone has blocked injector holes in the head any other ways then welding ??

    • 9 replies
    • 3.6k views
  19. Started by Kimby,

    Kimby here, of the "Dump or Keep this Rolla" thread. Reco-ing an AE-92 engine, 4AFC model. We're keeping it, and are progressing nicely through the advice received here. However, after removing the oil filter (a joy in itself, as many of you know) we cannot locate the engine block drain plug per the pretty photos in the Haynes manual. The best we can find is a bolt hole, about 7 or 8 mm in diameter, with what feels to be a sheared off bolt inside. This is located just behind the oil filter screw toward the center (not drivers side) of the engine cavity. As the head gasket is blown, we REALLY need to drain the block, right? We have litres of coolant "missing". I…

    • 3 replies
    • 4.1k views
  20. Started by Boosted,

    Hey Guys and Gals, recently taken ownership of an AE92 that's had the 4AGZE transplant. Long story short, the intercooler was stuffed, and rather than find another one I got hold of an alternative (for the right price of course). Have I mentioned that the whole install was real bodgy ? There's an intercooler mount to the engine on the left hand side at the rear and looking at the old intercooler there should be a mount to the engine on the right hand side, but there's nothing there ? Did a google image search, but can't find any info there either. Was hoping someone might have some photo's showing how the intercooler was mounted as standard.

    • 5 replies
    • 11.1k views
  21. Hi all, I am horribly embarrassed that I've got a new car that has a 3A-U in it... 1.5L non crossflow head, carby lump of poo... It's backed by a K50 with cable clutch, so I guess that may be ok for a KE-AE conversion without going to a T series and hydro clutch? Other than that, is there anything in this engine that's worth more than scrap value? I'll be pulling it to make way for something a bit more respectable, just wanting to know if i should just throw it in a rusty shell and send it to metal recycling...

  22. Started by tdg61,

    Gentlemen, I'm in need of some assistance, as no amount of extensive searching has given me the answer. After recoeing the head, I've found that the intake cam in this engine has a two piece gear arrangement that after some searching have realized that I should have inserted a bolt to retain it in it's original position. Does anyone know how to set it back to original. Thanks

    • 6 replies
    • 11.7k views
  23. Just wondering if someone can shed some light on this... Is there a separate ECT sensor for the engine ECU and another one for the temp gauge? My cooling fans keep running but my temperature gauge is reading less than normal operating temperature, and the engine isn't warming up fully, and the idle speed is staying up around 1000rpm or so. I suspect a faulty ECT sensor.... Robert.

    • 16 replies
    • 25.1k views
  24. Started by Womble1972,

    I just finished getting my AE95 running, and i would like to thank the rollaclub members who helped out with answers. The Gearbox was doing my head in but after 5 hours of shouting PLEASE GO HOME, THIS IS YOUR HOME (Happy Gilmore style) the engine and gearbox mated, I just needed to get it back on the road cheaply and by doing it myself i was able to save a lot of money. So thanks Hiro, TRD and others who listened to stupid questions by someone who does not know what he is doing. The Car, Engine and Brakes cost me $1500 for a car with aircon, Towbar and power steer and 4WD to get me to work I'm pretty happy. So Thanks Rod

    • 2 replies
    • 2.5k views
  25. hey i just bought a 1990 ae93 4age 16v (pretty sure) and my exhaust sounds really tinny. seems like its coming from the flex joiner up the front end. any quick/easy fix's? or should i just save some cash and do my exhaust up (extractors, high flow cat. etc.). also my brakes are stiff as would that be pads, lines or sumthing else? i also need a new central locking switch easiest place to find 1?

    • 3 replies
    • 2.8k views
  26. So for the past couple of weeks i've had this really annoying, really light rattle coming from somewhere in the front right sorta area of the car. I pulled the wheel off and tinkered around then pu thte wheel back on and the rattle went away for like 10 minutes, and now its back. It sounds like.. umm.. two keys jingling together. Just a really light rattle. Anyone had it? Its driving me mad.

    • 10 replies
    • 5.6k views
  27. Started by AE92Nova,

    hey guys. i have a Holden Nova AE-92 4A-FC. i have got a 2 inch sports performance exhuast system cat back, sports performance Extractors, Sports performance Cat. Next upgrade i want 2 do 2 the engine is Weber carby... however i am having probelms finding them localy. any 1 know where i cud pick 1 up apart from Ebay perfer 38/38. Price range $500 Max. Self installation. also would i need a spacer plate or does the carby just bolt straight onto the mainfold

    • 2 replies
    • 3.4k views
  28. Started by boxolla,

    hey all. ok i must admit I'm not sure what I'm in for here. I'm new to the site and I'm new to corollas and new to hatchbacks and FWD's. so if there was ever such thing as a true newbie. my pic is next to the word in the dictionary. I'm just about to get a '91 hatch, i know this will make things a bit tricky but i have no idea of engine model or anything serious about the car. i want to know if u can tell me if they are ok cars and what sort of limits the thing will be capable of with mods. i don't really want to do an engine swap. if that is the only real way to get better performance and handling then i just as well wait and get another car. I'm more looking along the …

    • 10 replies
    • 9.2k views
  29. Started by rob83ke70,

    I have a 92 model ae93 corolla seca ultima with a 7afe 1.8lt engine. The vehicle appears to be fitted with a water to oil heat exchanger (engine oil cooler), and the oil pickup/return unit is between the oil filter and the block. when the engine was apart, the machine shop lost the union that retains the pickup/return unit and mounts the oil filter. I have ordered a piece from toyota, and it appears to be appropriate for vehicles WITHOUT the heat exchanger fitted. They had two part numbers, one was long since not available, the other was good. does an ae102 or ae112 have this heat exchanger fitted or were they deleted? were they ever deleted on an ae93? were there…

    • 10 replies
    • 5.1k views
  30. Started by toy-ae92,

    Hi I'm having difficulties removing the gearbox form the 95r, have dropped the whole sub frame and got to the transfer case, also theres a diaphragm thing on the right of the transfer case with air hoses what that? any help would much be appreciated, all i need was to change a clutch...but now the whole car is apart

    • 10 replies
    • 5.2k views
  31. Started by springersrolla,

    gday lads a mates got a ae93 with 4agze lt8microtech front mount extractors exhaust nevo 175mm pulley.bigger fuel pump tvis and air mod done; Took it to dyno a while back and made 121hp which i thought was f@$kin shit considering the work done to it. Anyways just put some bosch p3 4 fr7kpx platinums and gonna get some new leads; any good brand of leads out there? It runs coil packs so what sort of voltage should they have? Would it be adviseable to do an injectors upgrade? Whats stopping this car goin harder and what sorta figures do you guys get with similar mods? Cheers

    • 6 replies
    • 8.4k views
  32. Started by GJM85,

    Where is the air/fuel mixture screw on the 4afc carburettor? Also what is the best way to set it? Car has a funky unburnt fuel smell at idle so I think it's running a bit rich...

    • 4 replies
    • 8.1k views
  33. Started by LowVp,

    when i got under my ae82 i noticed how much it looked like a mcv20 camry underneath and even the struts and the other day i had to replace the front rubber brake lines and i got a thinking what would be involved in putting mcv20 camry brakes all round. has anyone done a brake upgrade from another model other then a rolla

    • 17 replies
    • 29.8k views
  34. Started by D4NNYC,

    hey guys i have a few questions about an exhaust on a Ae92 corolla with a 4A-FC engine. Firstly what would be the power increase with extractors and a full exhaust system? Secondly what does a 4A-FC sound like with a fairly loud exhaust system? Cheers!! Danny

    • 36 replies
    • 58.6k views
  35. Started by Water Boy,

    Hey gang, Mate has just got himself a AE92 seca. Its a 16v Twin Cam but the craby model which i beleive is a 4af. Has any one done any mods to one of these engines? Induction? Exhuast? Be keen to see what people have done and your thoughts. Cheers James

    • 16 replies
    • 26.8k views
  36. Hi GUys, just need some help in getting a second hand right front quarter for my AE94, therefore need to know if they are the same as AE92? can't find a AE94 front right guard in Brisbane... Cheers ADam

    • 3 replies
    • 2.7k views
  37. Started by Tommei,

    Hi everyone, I'm considering to buy a ae92 with a half complete 4agze engine swap, that was intended to be turboed. Apparently the car does not come with the supercharger, ecu etc etc. So I'm left with the engine and most of the other stuff. I have a spare set of twin turbos that i took off my 2jzgte (from an aristo) and I was thinking whether I can bolt one or even both of those turbos on the 4agze engine. I'm just not really sure if the CT20 (I'm pretty sure this is the model of the stock 2jz turbo?) is a good idea and will run well on the 4agze. I'm pretty sure that a custom manifold will need to be made up, however this is a budget build and I am just conside…

    • 1 reply
    • 2.5k views
  38. Started by LowVp,

    Is there much involved in replacing cv boots on an ae82, it's the only thing that got picked for a road worthy and also is the speedo electronic or cable as the dash is making a rattling noise and the speed jumping 20k but give it a little tap and it stops briefly and reads correct

    • 9 replies
    • 5.9k views
  39. Started by Cream Dream,

    hey guys just wondering if a AE86 diff center (2way/1.5way) would fit in to a standard ae71 diff housing and if the crown wheel would be compatible and so and so probz a bit of a stupid question but would like to know :) Regards Mike

    • 7 replies
    • 3.4k views
  40. Hey, I put on a new carb from America for my 1991 4afc corolla and fitted it this afternoon and there are 4 vacuum lines that there is now nowhere to go on the carb and there is a thick hose that goes to the charcoal canister that has nowhere to go as well. Also now the idle is funny cause it idles up and down about 100-200 rpm (sounds like it has a massive cam in it lol) ive blocked off all the vacuum lines that have nowhere to go, and the carb is brand new and is jetted for my car. also there is a plug that is different to the old one it has only 2 wires coming from what I think is an electric choke where my old carb had about 4-5 wires I was thinking that I might be ab…

    • 6 replies
    • 2.8k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.