Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by Onikage,

    What is the temp rating of the thermostat which would suit a Redtop 4age in a AE93 corolla? And are thermostats a universal fit, or would i need to state a specific part number at the parts shop?

    • 3 replies
    • 9k views
  2. Started by ozyvr4,

    Hi there , will the AE86 JDM throttle cable fit & work in a AE71 ( 4age conversion) I have bought a ke70 cable from ebay and is too long. I can get a AE86 4age cable from Just JDM, or I will have to modify the ke70 cable.

    • 0 replies
    • 6.4k views
  3. Hi all, I am wanting to buy the hopper stoppers brake upgrade for my ae71 and will most probably be bolted to ae86 coilovers. what i want to know is if id have to run wheel spacers if i chose to run stock falcon 15's. I have contacted HS and they said they provide new hubs in what ever stud pattern, e.g 4x114.3 or 5x114.3 etc. I have been thinking of using an ED-EL xr6 lsd diff cut down for an upgrade as the brake set up would match very well, so i'm a bit stuck on whether or not to go corolla 4 stud or falcon 5 stud as i don't know if i can get blank rear rotors to get drilled to 4 stud. Any constructive opinions on what i should go with is appreciated. :th…

    • 0 replies
    • 2.4k views
  4. Started by Twincam16seca,

    Hi all, I am wanting to buy the hopper stoppers brake upgrade for my ae71 and will most probably be bolted to ae86 coilovers. what i want to know is if id have to run wheel spacers if i chose to run stock falcon 15's. I have contacted HS and they said they provide new hubs in what ever stud pattern, e.g 4x114.3 or 5x114.3 etc. I have been thinking of using an ED-EL xr6 lsd diff cut down for an upgrade as the brake set up would match very well, so i'm a bit stuck on whether or not to go corolla 4 stud or falcon 5 stud as i don't know if i can get blank rear rotors to get drilled to 4 stud. Any constructive opinions on what i should go with is appreciated. :th…

    • 0 replies
    • 2.6k views
  5. Started by 3lud13,

    JUst had a slight stupid moment when was changing my leads and plugs and removed all leads at once have now replaced the leads and plugs but not sure in what order to hook them up to the distributor am trying to google the answer and work it out but not having much luck right now. Have a ae82 with a 4a engine

    • 3 replies
    • 4.9k views
  6. Started by Figjam14,

    Heey peoples I'm after a brand new billet cam to suit 3k engine. any websites, numbers and stuff like that will help also happy to get from japan, usa and so on cheers

    • 12 replies
    • 3.9k views
  7. So I have just recieved an 88 ae82 seca in complete stock form (thankyou mom) yes it needs some work and I am doing alot of that myself. But being completely new to not only toyota but import vehicles front wheel drive just to name a couple of the top of my head makes it slightly difficult. A few things I am looking into and looking for info on (yes I have been googling and searching the forum but coming up with alot of conflicting information) I am thinking of upgrading the engine and gearbox and am looking for ideas on options and stuff (I have noticed ae82's came stock with a 16valve twin cam setup or something?) What would be my options for a good engine upgrade. Als…

  8. Started by ausca62,

    Hi Guys, I have an AE82 running a 4A m/t and I want to piss off the anti pollution gear. Has anybody done a carby change and what did you use? This car is only a fill in race car till I get my KE20 back on the road so I don't want to spend big bucks. I don't mind making an adapter plate of even a new intake manifold just want to know what works. Any help much appreciated. Cheers Paul.

    • 3 replies
    • 4.7k views
  9. So I'm building a 7ac to put into my ae71 with a friend and we figured we may as well do a little bit to make it last a while. 7AFE Block and rods 4AC head = 7AC getting cam reground etc, but just wondering if there's any options for heavier duty valve springs, i know with the 4kc you can use v8 holden motor ones, are 4ac the same or would i need to get some sizes and go through some part bookets? thanks

  10. Started by pipster11,

    so my ae93 gti had a leaking welsh plug just removed it and i'm deciding to replace the others at the front of the motor too should i do it while i'm there or just leave them? they don't look corroded at all but should i replace them or not?

    • 3 replies
    • 4.7k views
  11. Started by yohann,

    hello there all its been ages since ive entered here . i have a few questions . i own a daihatsu charmant witch is basicly a ke70 ive installed a smallport 4age inside with 20v itb's chinese exaust , and a standalone ecu the engine is completly stock for now the next upgrades are cams and vernier and head gasket i bought the HKS cams witch ae 272 degrees in - 8.35 lift and ex - 8.1 lift , hks came timing belt , hks valve spings and hks belt. now i have a few question first I'm going to install them with a 0/8 head gasket witch ill buy soon , and everthing else will stay stock. so my first question is how much compresion ratio should i go to , the fuel here isnt v…

    • 2 replies
    • 5.3k views
  12. Started by ToasticlesAe82,

    Does anyone remember know the type of oil to use for a 4a carby engine, what would you recommend that's better than in the car manual?

    • 27 replies
    • 47.1k views
  13. Started by Twincam16seca,

    Can anyone help me with this... I want to know if the ae86 hub and bearing set up is the same as anything else, e.g corona or kE70/ae71 but just has a different bearing size? I have been looking at the coilover setups, as i want to upgrade on my ae71 and i have the hubs for the ae71 and the xt130. I want to go with the s4 rx7 calipers and vented rotors to keep the unsprung mass down so it handles better as i don't like the idea of the peugeot/hilux setup (too much modifying). If it possible to buy new hubs for the ae86 that woulds be good to know! Any help will be great

    • 0 replies
    • 7.1k views
  14. Started by capt. crunch,

    Looking for some cams around the 264 - 270 deg duration that can run with stock ecu and valvetrain. Has anyone had experience with Wade, Crower or Tomei cams? don't want to go HKS as they are stupid expensive and same with TODA and a few other brands i looked at. Had a good offer on a pair of Tomei poncams and am pretty keen to grab those but was wondering if anyone has experience with Wade cams from Aus or the crower cams (not brian crower).

    • 12 replies
    • 11.7k views
  15. Started by SkidzMgee,

    Just wondering if anyone else on here has remover the engine and box from an AE82 and if there were any specific issues that a Gregory's/Service Manual doesn't cover? And also if the gearbox is a C or T50 in the Twin Cam badged models? The box is coming out due to the synchromesh for 1st to 2nd is rooted by previous owners and I want it replaced before I get my license back in a few weeks. Will hopefully have her cleaned up and maybe get a thread going somewhere for an actually Rolla on this forum :P Cheers guys Chris

    • 7 replies
    • 10.1k views
  16. Started by rat_rolla,

    does anybody knowif its possible to fit a set of older corolla twin lamps to a ke82 and what fits???

    • 1 reply
    • 2.4k views
  17. Started by JDM_AE71,

    Hey guys I'm new to the rolla scene, just wondering what cheap mods i can do to get a bit more power from my 4ac?

    • 10 replies
    • 10.6k views
  18. Started by Twincam16seca,

    Hi all, Just wondering if anyone has pics of any of the AE82 badges, i have a twin cam seca and have seen a different or "special" badge on the left side of a seca hatch, i was wondering if anyone knows what exactly it is and if they have a pic of one?

    • 9 replies
    • 5.6k views
  19. Started by tobyfran,

    i have an ae71 from 1983 and only one fricken side mirror on the right, i can easily buy chrome side mirrors that mount on the top of the doors but ill have to take the exsisting mirror off, does anyone know how to take it off without breaking it and how do i fill the hole it will leave in the small panel its mounted too now, or can i replace the panel with a completly solid and flat panel.

  20. Started by DKG779,

    Has anyone had a 2A hooked up to a 5spd manual, I am assuming it is possible due to the 4A having the same block. I am just wondering how it went. I can't really afford a 4AGE transplant as I have just bought a house but would like some extra performance. I am however buying a rolla sedan wreck AE82 that is 1.6 3 spd auto, so if anyone wants some sedan parts at a fair price posted at their expense pm me. Thanks

    • 4 replies
    • 3.2k views
  21. Started by Mr 20valve,

    Hey people just wanted to get some info on this b4 I start spending cash. Is it true that 2003 Sportivo brakes bolt on to a ae92/3 with no or minimal modification? Mainly the front setup is what I'm askin about. Any info would be useful.

      • Upvote
    • 12 replies
    • 9.9k views
  22. Started by ericcs,

    hi all, i have an 85 ae82 4-ac 5speed which has a noisy gearbox. is a 90 4-age box the same?, as i can get one for $50. cheers eric

    • 3 replies
    • 4k views
  23. Started by tobyfran,

    i have an ae71 and was wondering what kind of 4age engine is the best i really want a 20v blacktop but will probebly end up getting a silvertop unless anyone advizes against it. also just wanna know any problems i might have when having someone put a 4age in my ae71, someone told me once witht he 20v engines a small hole in the firewall had to be cut out to fit the engine in but not sure how reliable this is. someone help me out please.

    • 5 replies
    • 5.9k views
  24. Started by pipster11,

    hey guys i need a few parts for my gti so i put an inquiry in with amayama and they can only give me the parts for a jap spec 3 door GT 83710-12461 - Speed Meter Drive Cable Assy No.1 83710-12441 - Speed Meter Drive Cable Assy No.2 12372-15110 - Engine Mounting Insulator LH 89465-19176 - O2 Sensor will those parts fit my car? i tried googling to see if i could find the part numbers for an adm gti but with no luck thanks, Tom

    • 1 reply
    • 4k views
  25. Started by IrishPete,

    Hi everyone is any other Corolla radiator compatible with the AE95 (manual)? I've managed to damage mine on a tree-stump. It may be repairable, but swapping is always easier than removing, taking to shop, collecting from shop, and re-fitting! And there are corolla radiators for about $130 on Ebay, which will probably be cheaper than a repair too! Pete

    • 5 replies
    • 3.5k views
  26. Started by gt88,

    Hey, Wanting to do a coolant flush for our 1997 Conquest. What coolant is required and what is the water/coolant mixture? 5 lire coolant to 10 litre water? I have some Nulon Long Life Concentrated Coolant. Is this suitable? Cheers

    • 8 replies
    • 7.9k views
  27. Started by tobyfran,

    just wondering if anyone has a 32/36 weber carby on their 4ac motor or a 38/38 carby thinking about getting one as my carby needs to be overhauled and my mechanic quoted me 500 but i can buy a weber for 300 or so apparently you get more power but how much more and how much more does the 38/38 give than the 32/36 someone help my current carby is making my car run shyte and would love a new one with some grunt if they have some. cheers

  28. Started by gmack,

    Hey peeps, I recently bought a nice AE71 high top wagon. I've owned a couple of RWD KE/AEs before but never a wagon. I know that the wagon rear end differs from the sedan quite a bit, with leafs, a different tailshaft and different diff set-up. What I'd like to know is how to lower the rear end properly, it's going to be a daily drifter so I'm guessing I'll need some tramp rods and a panhard? I want the arse end to be as low and as stiff as possible. Any info would be great.

    • 17 replies
    • 25.1k views
  29. Started by SteveM,

    Hey guys I'm a new user and really don't know much about corollas. I have an old 90 Holden Nova, which is also I beelieve the E90 Corolla. The engine is in the way out and I'm looking for suggestions of the model of a different engine to replace it with? Ive seen suggestions of a 4age or 5agze or similar. Once i know which engines are suitable I can go from there! All help is appreciated! Same car as this one here I'm not sure if this is the right section or area, please move it if needed. Any help would be appreciated. Cheers Steve

  30. Started by Twincam16seca,

    Is it possible to use the ae71 t50 flywheel on a 4agze? or am i only able use the 4age flywheel? which is most commonly used/best to use as i have read the BT 20v is lighter, but i'm wondering if the bolt pattern is the same?

  31. Started by ae71rollr,

    Hey guys I'm interested in getting my car fully resprayed, I'm doing the rust removal and primer my self, i was just wondering if any1 new any places in adelaide that will do the coats of paint and clear coats, I'm looking to keep the car white. if you could just give us sum ideas on prices for a basic job.

    • 22 replies
    • 17.5k views
  32. Started by TomoKE55,

    Hi Everybody... Ive got an AE82 Twinky, when i got home today it was knocking severely. I thought it was the bottom end because it was running rough aswell but when i popped the bonnet i noticed the power steering pump jumping around against the motor causing the knock. It was too dark to even really see if it has just come loose or the bracket has acctually snapped, I'll have a look tomorrow arvo. Has anyone else had this problem or am i just unlucky? Cheers, Tom.

    • 2 replies
    • 4.5k views
  33. Started by Gecko71,

    Hey guys, So i'm finally starting my 4AGE conversion and I've been told not to bother getting the car engineered without having ventilated discs on the front. Just wondering if someone could provide a list of struts with ventilated discs that would bolt straight into a KE70. (I already know AE86 struts fit). Thanks.

    • 2 replies
    • 2.5k views
  34. Started by Boosted,

    Hey all, let's see if I get any answers for this one :hmm: Looking for pics on the exhaust mounting for an AE92 or even 82 corolla. Specifically looking for the mount at or just after the front crossmember, first mount after the flex connection. Mines broken and I'm not sure that it was the original mount regardless. I'm going to fab something up anyway, was mostly looking for inspiration.

    • 1 reply
    • 4.7k views
  35. Started by rb1994,

    hi i am currently looking for an ae71 sedan to build as a slider, i have found a wagon for the right price but was wondering if it is the same as a sedan apart from the shell, so does it have the same 4ac? t50? driveshaft? diff mountings? let me know please cheers

  36. Started by grkrolla,

    Hi all Ok i need some help plz I have a Ae71 with a sr20det that made 210hp on 8psi. And I'm going to put a gt2871 on in the next couple of weeks. And I'm getting it rdy to take on the track. Ive got HSD coilovers on the way the front are Ae86 and the rear are mr2. Ive got all swaybars and stratbraces. I'm just wanting to know will 17"x9" fit all round. And what brakes can i use. It has the Ae86 brakes on it but i don't think they will last very long on the track. You mite now the car. let me know what i should do and will them wheels fit and how can i make them fit with out to much work. Thank you for your time.

    • 5 replies
    • 7.5k views
  37. Started by capt. crunch,

    Hey just wondering if anyone else has ever had this? recently my 4ag's throttle body would stick when i release the throttle which makes it stay open after letting go of the pedal. Could it be the bushings that the shaft holding the butterfly in has worn out and isn't lubricated and is there a way to recondition the TB to fix the issue? I also noticed since putting the 4ag into my current KE70 that the pedal feels a lot lighter than it did in the previous ke.

    • 5 replies
    • 3.4k views
  38. Started by ToasticlesAe82,

    Kings or any lowered springs for ae82 sedan? i'm bad and should probably just buy some aftermarket coilovers but i'm lazy so sue me :) i've trawled all over ebay and can't seem to find any is the deal that any old king springs that are of similar size will fit/work? how will this affect my shocks/ride comfort?

  39. Started by ToasticlesAe82,

    Looking to purchase just the exhaust manifold gasket for a 4ac motor, don't want to really buy a full valve regrind set help a mate out? <3 <3 <3

  40. Started by tobiemb,

    i have an ae71 with a 4ac, it was running fine but all of a sudden it has started spraying fuel out the carby then dying. i put another carby on it but still the same thing. its coming out the pipes circled in red \/

    • 2 replies
    • 4.6k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.