AExx Corolla Discussion
1398 topics in this forum
-
best place to buy them ? how much should i be paying etc etc
-
- 2 replies
- 2.5k views
-
-
i have a ae93 seca and i want to put some springs in it to drop it down a fair bit, i am running the stock 14s and want to keep them just giv'em a coat of paint. so does anyone know what springs to run cause i can only find kings sprins superlows but i want it lower then that, any help would be appreciated. And photos of some extremely low ae93's
-
- 18 replies
- 9.5k views
-
-
Hi all, So trying to put my front end back together, any tricks to get the sway bar bushes to work? nut don't fit, should i pull out the heat gun? Car is an AE71 with Pedders bushes, stock swaybar, ke55 LCA
-
- 7 replies
- 3.3k views
-
-
i want to make an air box to surround my 9" air cleaner and sit under the scoop i am fitting to my bonnet.does anyone have any ideas how to do it?
-
- 2 replies
- 2.4k views
-
-
Hey guys, Today I checked out a clean AE92 with a Blacktop conversion / C160 6 speed conversion. The car overall drove well and revved out nice. SOme issues were: When revved and hit VVTLI, black smoke comes out the exhaust. Not alot but quite a bit Idle is set at 2000rpm, when fan blower is turned on, tames down to 1500rpm. Anyone know how to or how much to fix these issues? Or not worth fixing?
-
- 0 replies
- 1.3k views
-
-
Hi there guys! My name is Philip and I'm from Bulgaria. I currently have Toyota Corolla e9 2e engine carb. 1987 Liftback. I'm in trouble so I need your help. My vacuum piping is terribly wrong and there are some of it that is missing.. So I've found a vacuum piping diagram for my engine model, but there is a cluster of pipes that I can't solve out :( I'll attach an image of that cluster so if you could help me out with it.. I can start fixin' it but I'm not 100% sure that my solving of the problem is right.. So here, give it a look and I'll be very great full if you can help me out :) I've put some arrows to the cluster problem and the biggest mystery of my life is t…
-
- 4 replies
- 50k views
-
-
As the title inplys i want to upgrade my ecu for a bit more oomphh. just wondering what are my options and i want pretty much the cheapest one. i would even take second hand cause my theory is its a computer so it doesnt really wear out. it will be for a smallport thanks in advance.
-
- 10 replies
- 5.2k views
-
-
OK GOT A STOCK AS A ROCK 88 ROLLA WANTING TO KNOW IF ANY NEWER MODEL ROLLA SPRINGS WILL FIT AND IF THERE STIFFER ? ALSO WONDERING IF I COULD CLEAR SOME 15X8 205 50Z 0 OFFSET UNDER THE GUARDS ?
-
- 0 replies
- 3k views
-
-
I own An ae82 4age corolla(fwd) I need to find a drivers side window regulator with handle and I need a power steering pump and lines. I'm wondering what toyota models have these interchangeable parts eg 1990 seca ? I'm findin parts very hard to find Any info would be great Thanks Marti
-
- 3 replies
- 2.2k views
-
-
hey just wondering if anyone can give me some advice on the easiest way to remove an automatic trans from an ae93 seca. cheers
-
- 4 replies
- 4.4k views
-
-
Hey just wondering if any of the KYB shockies compensate for a larger tyre? Otherwise ill be getting the angle grinder out and making these tyres fit. Currently got stock shockies and springs, had 195/60's on the front so I thought they would fit on the back. :( Cheers
-
- 9 replies
- 9.8k views
- 1 follower
-
-
Can't damn well believe it. After all the work I've done, on the way for blue slip inspection the car would not give me top gear (3 spd. Auto) Tried rocking it 2-D D-2 etc. I have adjusted the carby and am wondering if it is the kick down cable at 80, lift the foot off and it goes into drive, hold it down a bit and it snaps in at 90 at say 60 lift your foot off slowing down for a corner it might go into drive. Should there be any play in the kickdown cable or should it be taught. Please Help I had one quote to rebuild at $1000, but it sounds something stupid
-
- 8 replies
- 3k views
-
-
just wondering what size injectors would be good for a ze with a boosted sc14? I don't have any at all at the moment, also wondering if anyone knows the spray pattern the stock ones have and what would be good to get as a "cheap" upgrade. I have heard s4 rx7 550cc fit, but not sure about spray pattern and impedance? i will be running afternarket ecu an ems
-
- 1 reply
- 9.3k views
-
-
hello all, I've had the rolla for almost a week now and minor mods have begun. I've ordered the new "fully Hekitk" white faces for the dash and I want to replace the lights too since they aint the brightest. Can anyone shed some light on the situation? excuse the pun cheers guys
-
- 8 replies
- 7.1k views
-
-
hi guys I'm 17 and have myself a ae82 rolla with a bigport 4age that i race at hillclimbs and sprints, i have been doin really well in it but i think its about time to do a bit of work to the motor. just want to know whats the best direction to head in, as in what to do to the motor first and wheres good places to source parts from. my aim is to get as much power out of the motor as i can. i only have about $1500- $2000 to play with tho.
-
- 7 replies
- 12.1k views
- 1 follower
-
-
Hi folk, I hope some one can help me. In the process of making my AE92 a nicer car, I have come across a problem that I can't get my head around. Here are the details. The plate reads. TOYOTA COROLLA SECA ENG - 4A-FC MODEL - AE92 - LH LFA-PS TRANS - A131L BUILT - 07/90 CAP - 1587..... and so on. What's puzzling me is the cover on the engine. Whats going on there? Is that cover a ring-in? It reads "Toyota 16 Valve EFI". Is there a stamp on it somewhere I can look, so I can confirm the type of motor this car has got, and I can get the right parts. If any one can help me it would be very much appreciated.
-
- 7 replies
- 65.1k views
-
-
Hey guys, i have learnt that i need not that much actually haha. i know that with these engines u can pretty much chop and change. i want to buy a black top from japan through ebay. comes with: complete engine mt transmission 5SPEED wiring ecu Intake Manifold Exhaust Manifold Injectors Fuel Rail Power Steering Pump A/C Compressor Alternator throttle body injectors coil pack Map sensor I need a different fuel tank that i am aware of and the lines. What do i have to do to get the fuel pump to start when i turn the ignition on? Is this motor too powerfull for a P plater? Should i be going silvertop? I don't mind too mu…
-
-
- 11 replies
- 6.9k views
- 1 follower
-
-
Booked the car in for Rego, and realised today that my seatblts in the front are not retracting properly, they need to be fed back in and they take up the slack as I go... Is there anyway of lubricating it to get through rego or adjust it Or am I just screwed and need to fork out 150 per side on after market ?
-
- 4 replies
- 2.5k views
-
-
i'm re-fitting the head on my 4ac and need the recomended torque settings and sequence.i have searched the forums and google without any luck.please help.
-
- 2 replies
- 48.9k views
-
-
So i bought STOCK central locking off buytry1 (eBay user) and i have no idea on earth how to install this. I have no idea what part goes where or ANYTHING AT ALL if someone has previously installed this kit into their car, or knows where a write up is online or step by step OR they can write a step by step now, id appreciate it so so much. I'm utterly confused and I'm not going to rip my car apart when all it should of been was a simple install. thank you!! http://cgi.ebay.com....em=110862671985
-
- 6 replies
- 21.7k views
-
-
will hatchback parts fit on a sedan? (bumper, door trims)
-
- 2 replies
- 4.6k views
-
-
hey I'm new here. need help with something (laugh) if you wish... I'm wondering how do i fit my SAAS seats to my ae71 my stock seat rails how do you get the stock rails off one side unbolts i can get it off fine but the other is welded or pressed on please any help appreciated.
-
- 7 replies
- 14.6k views
-
-
As title says, can anyone help with these part numbers? I have the link for Hardy Spicer below. I need them for a 1 piece tail shaft and don't want to cut up my good ae71 t50 shaft. http://www.hardyspicer.com.au/PDF_Files/Driveline/B4_Mech_R_2009-6.pdf Any help is great!
-
- 2 replies
- 10.1k views
-
-
Hello to all, about 18 monts ago i was given an AE71 Panel Van from a good friend of mine as he left for the AirForce. I drove it for about a year then took it off the road because of various mechanical issues. the last six months it's been sitting around and my extreme love for this car drove me to decide upon fixing her up. She's stripped at the moment and hopefully going into a panel shop in the near future to get some small rust issues sorted with. The main decision i am having issues with is wether i should drop a 4AGE into my car or re condition my 4AC engine and do a little work on that, I'm leaning heavily towards the idea of a 4AGE. Next question is what 4AGE…
-
- 1 reply
- 3.1k views
-
-
This may have been done to death but after many hours of searching I have found one guy saying it will work and another showing the lower bolt size differences and stating this will stop it happening.... I really need some solid confirmation that twin cam front and rear struts will fit in place of their single cam cousins without changing the hubs... I have the front and rear hubs aswell as the discs and calipers but its my daughters car and don't want it off the road for the four wheel disc conversion that I would do if it were mine... :yes: any help with this would be much appreciated Cheers in advance
-
-
- 12 replies
- 11.7k views
-
-
I recently built a 4AGTE engine for a mates sev track car. It makes good power(304rwkw @ 32psi) but has been putting a fair amount of oil into the catch can(1.5ltr over 6 laps winton). Now this only happens when we race it, it won't do it on the dyno or when he's road driving. The motor consists of everything brand new, rods custom pistons, huge cams, reco'd cylinder head etc. We've changed catch can pickup points 3 times with no luck. Oil pressure isn't excessive but we have the restricted oil feed for the BB turbo other than that oil system is STD. Anyone have any thoughts? Never had this much of an issue with any of the countless other engines I've built :(.
-
-
- 12 replies
- 18.1k views
-
-
Hey! is it possible for me to put KE70 king springs all round on the stock struts and shocks?
-
- 4 replies
- 4.5k views
-
-
hey guys I'm intersted in getting a weber for my 4ac. Would just like to know if you need a particular type of weber? putting it in and if the final finish is worth it?? Cheers
-
- 1 reply
- 3.3k views
-
-
hey guys, i have searches and searched but haven't found a straight answer! I have a 94 or possible 96 holden nova with a 4afe , now my question is are all exhausts from the headers back interchangable between ae92-ae94's an from standard 4afe to 4age gti's ? Justfrom the headers back ? Reason being is that its rego time and i have found a gti that's being wrecked with a cat back sposts exhaust and would like to chuck it on! Thanks!
-
- 1 reply
- 4.3k views
- 1 follower
-
-
My 2A-C Distributor (AE80) has bearing noise as loud as the motor running. Can I take a 4A-C Distributor (AE82) distributor out of my wreck and swap it or is the mechanical/vac advance curves different. Need to know soon as the car does country driving and I am about to put it off the road. All help appreciated as my manuals don't tell me anything and I couldn't find anything in search. Damian
-
- 3 replies
- 2.4k views
-
-
well as the title suggests what have some of you done regarding a roll cage in a ae71 and would a ae86 bolt in cage fit? and I'm in adelaide and if any1 knows of a good place to get one fabricated and how much in a ball park figure that would be great thanks aj
-
- 38 replies
- 85.2k views
-
-
My brakes are working fine, there is no metal on metal noise or anything unusual, but since I bought the car last year I didn't change any brake pads nor do I know when it was last done. I removed the wheel and just took a look, but I'm a bit confused as to what I should be exactly looking for. This was a picture of the left wheel side (passenger side), so the rusty bit on the right side of the opening is the part of the rotor: I didn't open unbolt the caliper because I'm at a friend's house and he doesn't have a proper sized socket wrench. I scratched a bit off what I thought was the friction material and that looks rather metallic to me so I was a bit worried …
-
-
- 3 replies
- 6.1k views
-
-
Has anyone used HCH bearings before? I ordered a spigot bearing the other day, expecting it to be an NSK or Nachi bearing, but an HCH bearing turned up. I've never heard of them before, and was just wondering if anyone has used one or heard of them. The bearing was only $3, and now that I think about it that seems to cheap for a spigot bearing, I searched for other brands and they are more like $10. However the part number for this bearing seems correct, it is 6001 2RS C3 V2 and was listed under spigot bearings for 4A engines in the catalogue when I ordered it. I'm just a bit suss on using a cheap bearing in my car. Anyone got any opinions? Are all 6001 …
-
- 5 replies
- 12k views
-
-
Hey guys, Silly question but ae71 slant front, was there ever a dx model? Or were they all "flat fronts"?
-
- 8 replies
- 17k views
-
-
Hey guys, trying to get the rocker covers off my 4AGE, but the problem is the factory grommets/gaskets will not come off! They are extremely hard and I've tried easing a flat head underneath to pry them off but they won't budge. Are there any suggestions? anything I could apply to help break them free? Cheers in advance.
-
- 9 replies
- 21.9k views
- 1 follower
-
-
Hi all! I Have been thinking about my RWD (AE71) 4agze rebuild, its basically the engine with no loom, no coils, no alternator. It is a big port to my disappointment but is from an ae92 so has oil squirter's and no TVIS. I have an sc14 in great condition and as we know the stock inlet manifold for ZE is shite, so... 1) I was wondering if I could use BT or ST ITB's? I don't know how they would match up or if it would be any more beneficial, throttle response wise, than a rwd big port manifold. obviously they would need a custom plenum, but 2) what about the runners from the TB to the head port? would they need to be re-shaped from the circular TB shape to the oval p…
-
- 9 replies
- 5.3k views
- 1 follower
-
-
hay boys. anyone got a repair manual for a 1996 corolla seca . electronic copy that is .
-
- 0 replies
- 1.9k views
-
-
Hey guys, Hopefully your not tired of getting these post and out can help me out i recently acquired a 1988 Ae82 corolla cs, and have a simple car like that i want to get the most out of it so my question is, what are some of the better mods or any mods i can do to get all the performance out of this little hatch for more info its running a 1.6L carburetor-ed engine with this is on the rocket cover i have not idea what it well umm means other that that its bog stock so thanks in advance for any ideas i can upload more pics on request
-
-
- 27 replies
- 86.4k views
-
-
will a front bar from a ae90 fit on my ae92 sedan? cheers
-
- 6 replies
- 10.5k views
-
-
So my 4a-c is running a little lean now with an open air filter and straight through exhaust, has anyone on here tuned the standard carby?? Is it possible?? I know theres the idle mix adjustment, but any way of making it a bit richer in the revs? I don't mind stripping it down/ experimenting i have a spare carby here if i stuff it up haha. No Webers or equivalent fancy carby talk around here please, got a set of kawasaki zx-9 carbs going on my 3T, the 4a just has to last until then without me spending money on it, so budget mods are sweeet. Any help appreciated, information on drilling out the jets etc. cheers
-
- 1 reply
- 6.1k views
-