Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by no eye deer,

    Hey fellas, 4afc motor in the Rola 94 model Manual. it goes to a bit over half way on the gauge, when driving it cools down, then gets hot again when it slows down. The standard T/stat is 300k's old. It doesnt close fully. I put a new T/stat in at first. It went straight to (just over) 1/2 way, and stayed there. No up or down. Took the new T/stat out, and put theold one back in. Any ideas? Mark

      • Upvote
    • 15 replies
    • 71.9k views
  2. hey guys as the title says I'm wanting to know what oil i should use when servicing my ae93 sx? had a quick search but come up with nothing of use. engine is a smallport 4age with 230xxxkms and standard. cheers azza

    • 14 replies
    • 48.9k views
  3. Started by Sl1mShaky,

    So I'm looking to get an ae86 and it will be my first. I have been trying to do the usual research to see my options which seem to be pretty open which I'm excited about. However the car I'm looking to purchase is an 85 and has a carbed twin cam which looks to be a 4ag but I can't seem to find info on stock carbed 4ags only 4acs. Is this a conversion or was it a rare stock option?

    • 8 replies
    • 36.7k views
  4. Started by conan,

    Seems stupid to me did this on my 4age keto n it was easy as I'm just stuck on the 17mm behind the carby I spent all morning trying to undo n I slipped off it bad enough to need stitches ( in the hospital right now ) I've tried with a normal ringy n I slipped with the ratchet n couldn't get it undone with the spanner maybe a bent spanner or something any ideas will help

    • 3 replies
    • 38.4k views
  5. Hey fellas, I have a 1994 Corolla ae93 with the carby motor. My fuel pump is leaking oil. Yes - oil:). Does anyone know if they are "rebuildable"? If not (which I expect) , can anyone tell me where I might get one? I have looked on Ebay, but nothing. Are secondhand ones any good? I havent pulled the pump as yet, so don't know where the oils coming from. Apparently its pretty common? Thanks fellas Mark

    • 7 replies
    • 40.2k views
  6. Started by no eye deer,

    4A-FC. the hose - about 30 cm ?- runs alongside the head. firewall side- its not the short length of heater hose, its just under that one. Its looks to be about 1 11/4" maybe dameter.can't find one, and don't know what its called, ( i have Googled it) Mark Sorry about double post. can't find the right button to delete the post

    • 11 replies
    • 35.6k views
  7. Started by anastasios,

    Hi all, What handbrake cables are used when using a T series disc rear end into ae71? I currently have the AE86 disc cables but they do not fit. I have read that you can use the camry splitter piece near the handbrake? What have you guys done in the past? Note ae71/ke70 are different to AE86

    • 10 replies
    • 50.2k views
  8. Started by no eye deer,

    Hey fellas, I have an AE 93 I think it is. 94 with 1.6 carby and 5 speed. When I change gears, the shifter sticks a bit, then releases. I'm not sure where to start. Maybe a bit of sticky oil on the plates, or something else? Doesnt shake on reverse, and its done 317km. Like -if you wanted to do a fast change- well- you have to wait until your allowed. Usually 1 second tops, but I can't race SS Commodores like that. (kidding). Mark :)

  9. Started by Jossy,

    I've put a 16v smallport in my AE71 and for some strange reason the limiter is not there anymore? It used to limit at 7700 rpm which i think is standard for a smallport but now will rev to 8000 rpm and still not hit the limiter, ive only done this a couple of times as i don't want to hurt the engine at all, but just don't know why it isnt there anymore? Its completely standard with standard computer only mods are extractors and pod filter, any help is appreciated!

    • 6 replies
    • 36.7k views
  10. Started by langdon69,

    Hi all, have an issue with the rolla, will start and idle, but as soon as you put any revs on it, it gets " chocked" and almost does. Has new plugs, new fuel filter, exhaust isn't blocked, tried a new map sensor, new air filter, just won't go past 2k. Left me stranded on my way to work yesterday. Couldn't even drive it onto a car trailer as I said it chocked itself one you aply power. My mechanic doesn't seem to think its the fuel pump, but he has no idea what the problem is. Help please?!!

    • 7 replies
    • 35.7k views
  11. Hey guys my key barrel in my ae101r has shat it self so i need to replace it. i have an old ae92r in the shed and was wondering if the key barrel are interchangeable. I don't know much about fixing cars but willing to learn. any help would be much appreciated, cheers in advance :D

    • 4 replies
    • 28.2k views
  12. Started by allpr0h,

    hi folks i have a dead big port t-vis 4age and a small port non t-vis red top swapped in. should i take the cams out from the big port as i can read they are more agressive... is this gonna be positive? thanks nate

    • 2 replies
    • 30.4k views
  13. hey guys as topic asks does the ae101 rear strut brace (2 point ) from the top strut bolts, on the ae112r corolla. ( sportivo turbo )

  14. Started by ae100project,

    Hey guys new to this I'm building a ae101 trueno track/drift guna add turbo and aim for maximim hp. I bought a ae70 gearbox n diff. What upgrades would be needed or am i better off getting a better gearbox? Any help appreciated I'm going in blind. Cheers

  15. Started by Djelibean,

    Hi guys, Don't know if anyone is able to help me, but I'm trying to hunt down the workshop manual and turbocharger supplement for a 2001 Toyota Corolla Sportivo Levin 7AFE, preferably in PDF format. The turbo unit on my car has seized and I'm gonna pull it apart to see if it's fixable before I invest in a new one. Thanks guys.

    • 2 replies
    • 29.9k views
  16. Easy Fixed , check loose dizzy connector working fine now . cheers

  17. Started by concept,

    Hi All So I recently installed a Weber 32/36 DGV Carburettor onto my AE92 Corolla - (4AFC motor) After I did it started to run on really badly. I was wondering if anybody had a vacuum diagram for the Motor (One that is Readable), or if anybody has done this conversion, could they give me a heads up on where I might be going wrong. I have blocked all of the Lines going to the original carby, but other than that I don't know what all of the other Vac lines on the manifold do Somebody please help Cheers

      • Upvote
    • 1 reply
    • 94.6k views
  18. Started by jorgyboy999,

    Will a ke70 gearbox fit into a ae71?

    • 1 reply
    • 22.4k views
  19. Started by MrKraze,

    Hey everyone! I just recently bought myself an AE92 Corolla, and i am looking to make some more power, and alot more torque down low. I know the 4agze came with a super charger and low comp pistons, 8.5:1 if i remember correctly. my question is, has anyone ever seen a 4age to 4agze conversion? i would want to keep the pistons that are currently in my car (9.4:1) is this even possible? or would i end up breaking something?

      • Downvote
      • Upvote
    • 9 replies
    • 79.6k views
  20. So latly when I go to start my car (only if it has sat an extended period ex. over night) it blows smoke out the exhaust. it doesnt look good and I'm worried something needs to be done. I'm new to the car game and trying to self educate as much as possible. Can anyone give me an idea of what this could be?

  21. Started by 1N5AN3,

    Hey everyone need some help plz, I've done a conversion into my 1994 Toyota corolla hatch. Everything is fine apart from I can't select first and second gear??? It is running the gear shift and linkages from the half cut (toyota levin) I'm now thinking do I have to go back to the standard shift and linkages??? Sound easy but with no room between the fire wall and motor makes it kinda hard, that's why I'm looking for some help b4 I do so lol, anyone done this and have one working fine thanks???

    • 1 reply
    • 24.5k views
  22. Started by nemisis,

    I have a 1990 Toyota Corolla Hatchback (AE92). I first noticed a problem with car's performance when I bought the car; it was extremely sluggish. After a week or so with putting up with this I popped the bonnet and checked the air filter (photo below) and noticed it was totally black. I installed a new air filter and it was like a totally new car! Anyway, maybe after 4 weeks I inspected the condition of the new air filter and whilst it wasn't in the condition of the original filter, it was quite dirty for a 4 week old filter, again - sluggish performance with a few misses whilst accelerating. Any ideas what could be causing the air filter to become black really quickly? I…

    • 9 replies
    • 33k views
  23. Started by Moetunes,

    Putting "new" glass in the hatch and the decals are showing some age. The CS Limited is cracked and withered and peeling, and the COROLLA part is mostly see through, but not all of it (it was the only hatch glass at the wreckers). What are my options for replacing the tired bits? Has anyone played around with changing the decals on the hatch glass or have a link to something? Cheers.

    • 2 replies
    • 23.9k views
  24. Started by SoulSearcher,

    During my nights when rollaclub was off line I went trolling other websites (I'm sorry) and the rim's which are never far from my mind, became my top priority... OH GOSH NOT AGAIN I hear you say.... I have fallen in love with some new ones....Rays.... Rays G Games 57 Maximum Pro Titanium Lip They are freakin awesome!!! And expensive :) So my garret turbo fund may be used for rims... here's a piccy: the ones on the RIGHT Now I have a slight problem... I made an enquiry and was asked "what offset and pcd do you want?" and I'm sorry to say I have no clue.. I thought that I needed to give them this info: 17x7 - or 17x7.5 with…

    • 17 replies
    • 27.4k views
  25. Started by Moetunes,

    Have been quoted $90 for a sx hatch door with spoiler from the local wreckers and was wondering apart from looks does the spoiler do anything? Any improvement in handling at higher speed?. The daily bitser I drive hasn't shown any inclination to wobble around at speed so was just wondering if other people have found the wind flow over the back is smoothed out or something similar with the spoiler on the hatch door. I do like the look of the lip on the back...

      • Upvote
    • 7 replies
    • 33.7k views
  26. Started by ATOYOTA,

    I've just received my ARP head studs (10 in total) and there's 2 different lengths, 5 of each. My question is, which ones go where? It's going on the twin cam 4K but most of the parts are interchangable with 4A-GE.

    • 7 replies
    • 36.8k views
  27. Hey guys. Bought my first car the other day, its a 1984 Toyota Corolla Ae71. Checking over the car the wiring is a bit dodgy and in some places not even there so I was just wondering if anyone would be able to send me a wiring diagram for the car and possibly some pictures mainly of the loom near the starter motor, under the dash etc. Would be nice to get this thing wired up properly and back on the road as at the moment theres so many things not wired up on it it would get defected pretty quick. Thanks in advance.

    • 4 replies
    • 42.8k views
  28. Started by Nic93,

    Hey guys! I've been having a bit of idle issues for a while now, before i had my major service my car would idle at around 1.5-2k RPM, ever since its been running smoother and alot lower at around 400-550RPM, which is too low - almost to the point where it cuts out, not to mention the slight feathering i have to do to get going which can't be great for my clutch. Anyways maybe my TPS is off its mark and was wondering 1) How do i check? 2) What value should it read? 3) How do i adjust it if its off? Thanks a million!

  29. Started by conan,

    It's always had a high idle at 2100rpm with the idle screw all the way in n it has just started searching every now n then can anyone tell me what I need to do its in an ae71

  30. Started by 79RAT,

    Could someone measure the back end of an 86 hatch where a duck tail spoiler would mount? I want one for my ae51 and i'm thinking one for an 86 might be the closest fit.

    • 2 replies
    • 16.7k views
  31. Hi all, I have been researching turbos and found a bit on the wrx sti vf34/36 turbo on http://www.hachiroku.com.au/2009/02/ae86-tuning-guide-turbo-4a-g/ and was wondering if anyone has done it or had any experience or driven a 4agte with one on it? I'm very interested as it seems to be very quick spooling as the vf36 has a titanium twin scroll exhaust wheel and shaft with ball bearing assembly. It has a ridiculous exhaust flange though... custom manifold i guess! Also had a look at the garrett gtx3076r which my mate had bought for his ET turbo Pulsar, but once researched it seems like there would be nothing until 5-6k rpm? I'm aiming for 165-210rwkw, I hav…

    • 0 replies
    • 39.7k views
  32. Hello, I recently bought a set of Axis OG Sans, off JDMYard, theyre 15/ 8" rims, pretty crazy as i have a corolla AE92 to throw them on... So my dilemma came the other day when it came to put tyres on. I originally opted for bridgestone RE002's, sizing of the tyre was a bit hard considering the car and rim size. So finally set on 195/50/15's as i had test fitted a Falken in the same size, which worked. So the day came to put the tyres on, i come in saturday morning to put them on the car, and the tyre company told me the sidewalls were too stiff to fit over the offset =/ so my real question is, can i please get some help with tyre brand, size and possibly better …

      • Upvote
    • 18 replies
    • 165.4k views
  33. Started by nemisis,

    I have a 1990 Toyota Corolla Hatchback (AE92). I left my car at a mates for a few months so he could fix a few engine problems whilst I was overseas. The car was not driven and was left outside. After some rain, my mate told me the floor of the drivers side had a big pool of water in it, and I saw this too. He seems to think some sort of drain hole is blocked, does anyone know how to fix this? He mentioned the front right wheel arch to be unscrewed and drain holes cleared? We ran out of time to check this.

  34. my driver window RH side has been stuffing up. when it winds down, it pops off the rails then winds up on a angle. it doesnt slide up into the spot it is meant to unless i guide it. some times it just gets to a point where it wont go up or down. its a manual winder and the tab where the front arm connects to has broken off but i have zip tied it to the point that it is in the proper spot. if anyone can help out in any way, i'd appreciate it. i want to get tint but not if the window keeps playing up. if you need photos or a video, ill do my best to grab them. just want this window fixed so i can use it when summer comes around and i can get my windows tinted. thank you

    • 6 replies
    • 19.6k views
  35. Started by darkage,

    I found a nearby cheap AE92 Hatch which seems a bit too good to miss, looks like it has been taken care of to a certain degree, recently unregistered, and sub $500 price. Hoping it has better condition body than my old freebie ae92 rusted out windscreen sill example. Just wanted to ask, what signs do you look for in order to spot if the windscreen is still factory original or has been replaced ? I know if the rubber seal easily lifts from the body and you check underneath thats a very bad sign to start with. but yeah I get the impression with factory seals they seem to be poor anyways. Edit - I think I figured it out. 3 piece mould where it has the silver "…

    • 4 replies
    • 21.6k views
  36. Started by buzzook,

    OK, if you want a laugh, read on... Had my AE102 1.8L Conquest auto sedan for a few years, but it had new pads just before I got it, so have never had to do the front disc pads before. My old Suzuki used to be a 15min job, so I figured the Rolla had to be simple, right? Wrong!! Doh!! I pulled the pads from the caliper ok, got the piston back in with a C-clamp, as you do, but I cannot figure out how to get the new pads into the caliper without growing an extra arm or three... There are these [insert suitable adjective] wishbone-shaped springs that connect the two pads together, and sit on the outer edge of the pads right under the curve of the caliper. …

  37. Started by FLYGTI,

    Hi all. Having trouble working out what to look at/replace after throwing code 12, 14 and 24. I know what they relate to but not sure if I should just replace the parts or how to test. I don't like/trust anyone with my baby as most wouldnt know earhole from arsehole when it comes to the crunch and not wanting to pay $70/hr labour. Starts fine all weather, had some missing issues due to afore mentioned dodgy mech putting wrong plugs in (missing under load) new plugs fixed that. Only issue now is its hunting ever so slightly and becomes rough at idle once warm It will hunt until I come to complete stop then I notice small idle bounce only about 50rpm. Revs wont dro…

  38. Started by Willacy70,

    As stated, my 4ac knocks on start up. It is a top end knock and is coming from the 4th cylinder only, sometimes the noise lasts a few seconds and other times 10 or 20 seconds. I would say it has to do with oil circulation as it only really happens when the car is cold. I also think it is linked to the cold weather and thickness of oil. The car is running 20w50. The last oil which come out of the engine was in a rather bad condition. Is this a common thing for 4ac's, not much out there about the issue. Any help is appreciated, thanks

    • 11 replies
    • 25.3k views
  39. Started by AE71Luke,

    hey everyone, not to long ago i got my first corolla after wanting one for ages. I found a one in excellent condition. But i think it might have carby issues. also the timing is jumping about 2-3 degrees and it idles bit S*%T. I would like to know what would be involved in changing it to a WEBER or any other carby that may be better? and what would be any possible reasons for the idle? What would i do with the vacuum lines which ones could i block off etc etc. might be a stupid question but this is the first carby car i have had much to do with. any help would be appreciated.

  40. Hey guys, so I checked my car in (AE92 GTi) for a mech. inspection today, i've had it for about two years now, always ran a little rough, but i kept it nice and serviced well over the years. So the mechanic comes back with this; can I please get some feed back on this? whats important, my guess is the leaks, he didnt figure out why my front end knocks, its a weird thing to describe, it happens when i put down power - not necessarily flat footing - but moderate acceleration, its a very rapid knock, almost like a driveshaft knock of some sorts, its not CV's because i do the full lock turn and no ticks, so if anyone has had a similar issue it would be much appreciated! here…

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.