AExx Corolla Discussion
1398 topics in this forum
-
-
Is the 4A-FC exhaust manifold gasket the same as the 4A-FE? Thanks.
-
- 0 replies
- 561 views
-
-
Toyota AE92 Wagon (EE98) Ducktail Making
-
- 0 replies
- 1.3k views
-
-
Has anyone come across a pulley from another vehicle that fits the 20v water pump? something larger to reduce the pump speed. Cheers
-
- 1 reply
- 880 views
-
-
Ok so where to begin. I bought the car about 3 weeks ago, it for some reason gets a little bit of a death wobble going. This happens all the time but gets worse on the freeway. It feels somewhat like I'm doing some fat skids the whole way down the road and gets rather scary at times. It has new Panhard bushes as I thought that might be the problem. Kinda imagine your diving down the Rd any slight turn and the rear of the car feels like it's trailing / delayed behind the rest. I appreciate any help.
-
- 6 replies
- 1.1k views
-
-
Hi, Looking at doing a service on my '98 AE112r 7afe engine, and i was wondering what oil would be recommended for a engine that's run 100,000km's only. The manual say's from factory it was 10w30, But as its getting older i was thinking of going up to 10w40(Also there's a special on currently for Oil+injectory cleaner for 30$). I have noticed no engine oil usage, drop or burning oil, it runs fairly smooth for its age. I was looking at the castrol magnatec, and a ryco filter. Spark plugs should be fine. All help appreciated, Cheers jf
-
-
- 5 replies
- 1.9k views
- 1 follower
-
-
Hey guys, I just bought an ae101 hatchback and it’s completely untouched so I’m looking for inspiration and ideas on what I can do to make it look better (stance, fitment, bodykit, interchangeable lights and garnishes) post pics or links to parts if possible please. Il post a pic or 2 of my car.
-
- 0 replies
- 593 views
-
-
I was wondering if I can bolt up a t40 trans to my 4ac. I have a 83 corolla ae71. I bought the car with a auto 4 speed and bought a manual 4speed but the bell housings look different. Do I have to fab my own adapter or does it bolt up ?
-
- 0 replies
- 608 views
-
-
How to duplicate Toyota AE92 Side Mirror Cover https://youtu.be/RMZ6jOWJvBU
-
- 0 replies
- 890 views
-
-
Hi all and thanks for the help In advance. So where to begin. Plain and simple the car is idling very rough, it seems to have the choke getting stuck on or be running far too rich. I can unplug the power to the choke and the car slows and stalls, also I can lean the idle mixture to nothing and it still runs. I'm somewhat confused what it might be so I've come to the geniuses to see. Thanks for the help in advance.
-
-
- 11 replies
- 3.4k views
-
-
I have just purchased a 1998 corolla with 180,000 on the clock was wondering if later model gearbox will bolt up as 2nd 5th syncro is gone in mine and it is hard to find a low k second hand box. I have tried searching with no success.
-
- 0 replies
- 602 views
-
-
Hi, think I know what this is but it's a confusing one. Last few days my AE101 hatch manual has been leaving this fluid under the passenger side front. it is dripping off the bottom of the alloy casing under where the clutch and selector mechanisms are. It looks to me like hydraulic fluid. Clutch and brakes are full and are green coloured anyway. power steering maybe is a little less than full but is hard to say for sure. Could it be gear box oil?? I've had it to a workshop I've used in the past and they found the oil cooler leak I knew about but was leaving cause it wasn't too bad and fixed it and cleaned the bottom of the motor off but 2 days later this is what I get af…
-
- 23 replies
- 2.7k views
- 1 follower
-
-
I just bought a new to me corolla. Ae92 gts 1988 has quite a bit of problems. But only paid 400 dollars for it though. I need help identyfing these wheels that are on it. Are they factory wheels? I need center caps for them.
-
- 2 replies
- 751 views
-
-
Hi dudes I need some advice and can't find an answer. I have a 1989 Toyota Corolla Seca CSX with a 4AFC engine and it's a 5 speed manual. The pistons on this engine (460,000 kms) and the head is cactus so I need to replace the engine. Rather than a full engine rebuild I figure it will be cheaper to buy a complete car (possibly an Auto) (so i have lots of spares) and replace the engine with the 2nd hand one with lower kms (~180,000 km) from the complete Auto car - Note...if I swap over the engine I'll also replace the timing belt and waterpump. Q. Can I swap in a 4AFC engine from a 1992 Corolla Seca CS Auto (3 speed auto) by removing the auto and bolt…
-
-
- 8 replies
- 1.6k views
- 1 follower
-
-
So I recently got a 83 ae71 wagon, it's my first toyota and it been pretty cool so far. Theres a bunch of play in the steering and i haven't been able to find a rebuilt steering box, so i'm wondering what's all needed to swap the car to a rack and pinion because those seem much more available. http://i.imgur.com/9rhn86L.jp[/IMG]
-
- 8 replies
- 3.1k views
-
-
hi guys, i'm new to the thread/forum world. i'm after some knowledge and advice. I've picked up a nice little 1988 twin cam. it's pretty tidy and came with a few spare parts. i owned one of these years ago and it went really well. this one not as good though. i don't know a lot of it's history, but it sounds like it was owned by a mechanic, and had a bit of a freshen up engine wise but no major mods that i know of. the thing is though it lacks a lot of power, it revs very poorly and when it should start to do it's thing around the 4000 rpm mark there is very little rev or power change. i haven't started playing with plugs or timing yet. it does h…
-
-
- 18 replies
- 6.1k views
- 2 followers
-
-
hi all, so ive bought my first big port 16v 4age the other day and the new engine is running twin dellorto's dhla 40 g with a modified 4k distributor, the distributor wasnt generating any spark so I'm going down the road of putting a scorcher electronic distributor in, and i have to supply them with the drive gear for the new dizzy, so now does anybody know if all 16v dizzys use the same drive gear? cheers
-
- 1 reply
- 1.2k views
-
-
Hi guys, my clutch was replaced recently and now it's making a strange noise. It's only doing them in first and second gear when hitting around 4000 RPM and revving a little higher than usual. It was not like that prior to getting the replacement clutch put in. https://youtu.be/zp-DSQi4n5c It's a Toyota Corolla AE112R 2000 hatchback. What do you guys think it is? So I can tell the mechanic?
-
- 7 replies
- 964 views
- 2 followers
-
-
Hi All, Been a while since I've been on here as the 'rolla has been gathering dust as other priorities took over. Wondering if anyone can assist with the below. I have found a Lexus J160 6 speed box and intend to purchase SQ Engineering adaptor for 4age. Condition of box unknown, but I do know the clutch assembly including fork and slave cylinder is missing along with shift selector assembly. I understand the J160 box will place the shift lever farther back in the tunnel and there are solutions available to address that and I am willing to play around with adapting another slave cylinder and clutch fork if they are too expensive new. (Any help here?) …
-
- 0 replies
- 1.1k views
-
-
Hey, looking at adding an EFI fuel pump into the existing tank on my AE71, just street use. Are there any Toyota pumps that are the right height to fit with little to no modification? I'm aware I'll need to cut a hole in the top to fit the pump, I'll also be installing baffles in the tank. Alternatively if anyone has a source on a EFI AE86 tank that make life easier.
-
- 2 replies
- 1.3k views
-
-
Recently fitted reconditioned cylinder head with VRS kit to 2000 1.8ltr 7a-fe corolla. Engine runs but pushes oil out rocker cover/cam seal (a and b in images) Cylinders 2 and 3 have only 60psi. 1 and 4 have 180psi. Piston rings??? Please advise possible causes and remedies.
-
- 0 replies
- 583 views
-
-
-
Hi everyone, Just wondering if this is fairly straightforward to do. I have a gregorys manual which seems to go into good detail on replacing/refurbishing the radiator. I am just concerned how corroded the inside of the engine might be. the radiator cap is rusty as and I just cleaned out some blocked up hoses running from the rad cap to the overfill bottle. I'm sure the thermostat is clogged open with gunk cos she runs around the Cold mark even on a hot summers day. been doing it for years and never had a problem with overheating so I just left it. But now all the hoses are brittle to the touch so its only a matter of time before one bursts. B…
-
- 3 replies
- 858 views
-
-
Hi all ive just replaced the front brake pads on father in laws corolla Is it common on the ae102 r for the discs not to be attached in anyway except wheel hub nuts and the centre hub flange Ive never seen a brake disc that just slides onto the centre hub and has hub bolt holes with a mil of clearance either side but no screws there are two threaded holes in the disc that i would have thought at least keep the disc attached to the hub I'm usually involved in french cars which have a pair of equie distant posidrive screws to secure the disc plus wheel bolts that screw into the hub plus the hub flange Would the brains trust please enlighten me as…
-
- 2 replies
- 727 views
- 1 follower
-
-
Hey, Doing a 4AGE conversion on my AE71, was wondering what a good choice for new front calipers would be, I've heard RA40 caliper fit, can anyone confirm? If not what would be a good alternative? Cheers,
-
- 3 replies
- 3.7k views
-
-
Hi all newbie here I am driving my mothers AE82 Corolla and it has a rattle in around the distributor. It wont idle properly if at all and has flat spots all over the acceleration cycle. I thought I would consult the brains trust on this forum before I start spending money on the wrong parts. The rattle is not from the engine and sounds to me like the dizzi fly weights or a loose wing nut around the carby area. Its not a regular mechanical knock. See picks
-
- 10 replies
- 2.4k views
- 1 follower
-
-
Hi guys, as the topic suggests my 4ac stalls once it is warm while coming to a stop (e.g: pulling up to an intersection). On occasion when stopping, the car will idle at around 500-700 rpm, and other times it will idle fine. I have realised that it only happen on really cold days. During summer the car ran fine and I hadn't had this issue for 6 or so months but it seems to have come back now that weather is getting cooler. The problem is really annoying. I have read the thread about one of the diaphragms in the carby being faulty but I'm not 100 percent sure this is the issue. I am certain though that this is a carb issue. The carby has had a vacuum delete. Any help w…
-
- 18 replies
- 108.9k views
-
-
My 92 Seca seems has faulty hall sensors in the distributor which seems like an easy fix.....well the particular set up on this one isn't so common here in Australia and to find a complete distributor or just the hall sensors for it has proved so far impossible. I've tried the usuals and not so usuals such as the auto stores, Toyota, specialised wreckers, private wrecking, facebook clubs etc...Nothing!!!! Can someone please help!!!! If you either have one for sales that can be shipped to Ipswich Qld or have a way of using a distributor from another model please let me know. Thanks.
-
- 1 reply
- 6.4k views
-
-
Hey guys i own a corolla AE 1988 with 1600 4A M/T engine. Yes that is was the sticker on the rocker cover says 4A M/T ?? I have done a heap of research but can't find any reference. I found one web site that said. T for turbo but that diesnt make sence since its a 4a carbie engine. Just some extra usless info on the old girl, she has power steering, A/C, twin thermo radiator fans and also has a tachometer. Now from my very limited knowledge wasnt only a twin cam that had all that stuff? I am stumped any help would be great thanks.
-
-
- 10 replies
- 3.6k views
- 1 follower
-
-
i have a 1983 corolla wagon with a 4ac auto trans and i want to swap a 3tc from a 1980 corolla liftback auto trans? what do i need from te72 to do the swap.
-
- 0 replies
- 587 views
-
-
Hi All, I was doing a bit of service work on my Daughter's Corolla today (new fan belts) After replacing these, I started it, and inspected all rotating assemblies. The harmonic balancer may be shot as it creeps away a few mm from the engine as I increase the revs. The A/C belt was missing, and the ALT + water pump belt was damaged; which made me take a good look, and ask "why". So, the harmonic balancer pulley is a job for another weekend. This has prompted me into looking around for timing belts/belt kits, as that part is so close to replacement I may as well do it while I'm getting stuck into the Harmonic Balancer job. After …
-
- 5 replies
- 3.1k views
- 1 follower
-
-
Howdy fellas have an ae71 with a 4age sitting in it basically everything's all good besides the face it getting a doughey clutch after about five or so minutes driving, heat wrapped the exhaust and it's not worked any miracles for me what else could you guys recommend
-
-
- 4 replies
- 1.1k views
-
-
Hi all, New user from Australia, having recently acquired a 1994 Corolla CSi Limited hatchback. I'm on a bit of a rampage trying to figure out what era 4A-FE I'm working with, and hence what can be done to spruce it up. I've found two holes on the intake side of the cylinder head: one for the EGR system (apparently never fitted to mine...), and another for some unknown purpose. I've attached a picture of a cylinder head the same as mine (lifted from here). Bottom left is the EGR port integrated into the intake manifold (which my intake doesn't have), top left is the mechanical fuel pump (which I don't have, obviously), but the bottom right hole is a mystery to me…
-
- 5 replies
- 2.1k views
- 1 follower
-
-
Hi there! I just recently purchased a 1983 corolla wagon with an '86 GTS 4AGE swapped in. It's a quirky car but I love it. Among other things, I want to try and figure out this weird fuel pump noise. https://www.facebook.com/robert.colosi/videos/1476305235713964/ That noise goes from when I turn it on to when I turn it off. Never really stops. There's no fuel supply issue though. No sputter, no surges or lack of power. Drives fine. Is there such a thing as a fuel pump that just has operational volume to that extent? Or is that thing going out? Thanks.
-
- 2 replies
- 942 views
-
-
A few pictures i took today at the Australian Hill Climb Championship.
-
- 1 reply
- 9.6k views
-
-
Hey, I've just bought a 92 Corolla with the 4A-FE engine. I've never driven one of these cars and was surprised by the torque of the little engine. I'm just wondering what cheaper upgrades are available for this engine? Thanks Canny
-
- 0 replies
- 6.3k views
-
-
Hey guys, I bought an AE101 about a year ago and i've slowly started working on it. By the end of the project it'll have a manual conversion as well as a 4AGE with completely forged internals, all the bells and whistles and some interior work as well. So far I have completed the suspension and I'm moving on to wheels and such... probably going to start building the engine by the end of the year; but i've hit a bit of a snag. There is some body rust just above the rear right-hand side door that I didn't notice during inspection. It was hidden under some dirt that had collected underneath the plastic door lining thing, the one that spans the length of the side doo…
-
- 3 replies
- 5.7k views
- 1 follower
-
-
Hey everyone, thanks for the forum add. My name is Mark, and I am new to Toyota and Corolla at that. I am certified in mobile electronics and have been installing them for 10 or so years. So I hope I can help anyone with audio, video, or remote start/security questions in the future. I bought this Corolla a couple of months ago to turn into my daily driver to save money and have another project. =) It has 157k original miles. Here is my problem, I recently just dove right in to swap the alternator. It only had 2 bolts holding it in and nowhere to tension it (like I've seen on other vehicles and in videos). Am I missing a part? I see nowhere to tension the belt aft…
-
- 3 replies
- 4.1k views
- 1 follower
-
-
My brother has a Corolla GTi16 (AE92 hatchback) with the 2nd gen 4AGE and he's running some issues that I would apreciate help with. 1 - Cold start idle is 1300/1400 rpms when I think it should be around 2000rpms and drop to around 900. He is idling at 900 when fully warmed up but at idle I think it's too low and perhaps this is related to what's next. 2 - If he turns off the engine when fully warmed up and, let's say, 10 minutes later, he starts the engine again it suffers from idle hunting for a few seconds before stabilize. 3 - When he goes to a closed parking lot like an underground parking from a shopping the idle also gets crazy and sometime the engine s…
-
- 11 replies
- 6.6k views
- 1 follower
-
-
Hello everyone new here, I have a corolla 95, 4afe engine 16V the main question I have is in relation to individual throttle bodies, the engine apparently is the older head type related closely to the 7AFE with the injectors ported in the manifold. what I am looking to do is use 4AGE ITB's as they're all that is available on ebay and don't really want to fork out thousands to get the 4AFE or 7AFE type's either, I do not wish to perform a head swap as I am trying to keep cost to the QTB rather than having to fork out for a new head as well. I don't mind if they don't match up perfectly as I may be able to use the flange of the original. And I don't mind how much screwing…
-
- 5 replies
- 17.8k views
-