Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by eefui,

    TOYOTA COROLLA AE101 Rear Lips https://youtu.be/jngEU9CATfY

    • 0 replies
    • 689 views
  2. Toyota Corolla SE Limited AE92 Light Weight Bonnet Making Part3 (Installation) https://www.youtube.com/watch?v=ka0_Z1foSzs

    • 0 replies
    • 714 views
  3. Toyota Corolla SE Limited AE92 Light Weight Bonnet Making Part 2 (DeMold) https://youtu.be/CV3ZqLCcwO8

    • 0 replies
    • 649 views
  4. So I’m swapping a 4AGZE out of an AE92 Corolla and dropping it into a less bent AE92 that used to have a 4AFE mounted in there. It appears that the 4AGZE was mounted a little dodgily (fits with the rest of the car) and the Right hand side (timing cover) engine mount appears to have been cut off the inside of the guard and this abortion fitted, pics to follow. I’ve done a little bit of research, enough to realize that the ZE installation appears to be dodgy and that I should be able to use a 4AGE mount and drop it into the new shell. Looking up ToyoDIY though, Toyota have different part numbers for the 4AGE mounts and the 4AFE mounts. There are also different part numbers…

    • 4 replies
    • 40.5k views
  5. Toyota Corolla SE Limited AE92 Light Weight Bonnet Making (Molding) Part 1 https://www.youtube.com/watch?v=4EV27V6smD0

    • 0 replies
    • 641 views
  6. Started by NickCandy,

    Hi team, So I have had about 4 Ae92 fxgts and an Ae82 in my time but kept them fairly standard. Just finishing up a rebuild tomorrow with new leads and a timing light then start tidying the body up. But... I have always wanted to build a 4agte, however seeing the limitations of what the car could handle trying to get the power to the road never bothered. So... Tomorrow I am also looking at another fxgt with a 20v in it and thought maybe this could be a bit of a bigger challenge. Here in NZ we have the carib and the caldina. Carib running a 20v with 4wd and a solid rear axle Caldina running all sorts of other engines but with 4wd a…

    • 0 replies
    • 926 views
  7. Started by RAT_SECA,

    Hey guys, currently doing the drum to disc conversion on my AE94 Seca CSI using AE93 Seca SX rear setup. Swapping the front over aswell with the front control arms and sway bar. I keep hearing mixed reports about whether I need the AE93 Brake master cylinder or not. Anyone know for sure? As visually they look exactly the same. Don't want to swap them if it's not needed as the AE94 has a new one in it already and the AE93 one is all dirty and rusty. Any help would be greatly appreciated cheers!

    • 0 replies
    • 733 views
  8. Started by Evan Vidler,

    Gday, I'm a new member based in Qld Australia. I have fitted a new T50 gearbox and when I fill through the filler plug I can only get 1 litre into the box before it is running out. Manual says it should hold about 1.6litres. Any help most appreciated. Cheers, thanks, regards Evan

    • 8 replies
    • 3.6k views
  9. Started by RollaAE71,

    Ive got an Ae71 4ac auto and i wanna convert to manual, just wondering if any one has done a conversion before and can give me some advice on what parts i need( gearbox...) and roughly how much it will cost.. cheers, Rod :D

    • 7 replies
    • 25.8k views
  10. https://www.youtube.com/watch?v=MjJGBtdVgsc

    • 0 replies
    • 665 views
    • 0 replies
    • 647 views
  11. Started by Bluebeast,

    I want to put better calipers on my AE112 but i don't really know where to look. Any help?? Love you all.

    • 3 replies
    • 1.1k views
  12. Hi all, It's probably been a year or more since I've been on here but I always point newbies to the forum and tell them to read and google shit first before asking covered questions and topics on the Facebook pages. Anyway rant over, just wondering if anyone with a beams ae71/ke70/ae86 has run the Flo,s compact brake booster and also what is everyones opinion on their quick rack for street and the odd hilclimb and track day? Is the rack worth it or does it make it harder to drive on street, is it better? I know it's less turn lock to lock, but seeing as I'm going beams (now) I've got a power steering pump and thought ae86 p/s rack might be nice to have. Let…

  13. Ok peeps I just bought a cheap oil catch can from autobarn ( the drift one ) I'm after some help installing it. What's the best way to have it setup, also don't judge but is the pcv necessary as I'm pretty sure mine's a dud. The car has a stock carby with aftermarket air filter and has had a vacuum delete . My reason for installing this is it suffers pretty bad blow by due to dodgy rings, I'm sick of the mess and constantly adding oil. Thanks for the help .

    • 4 replies
    • 3.6k views
  14. After spotting a corolla sportivo near my house, i now really want to get a sportivo body kit for my pre-facelift rolla, but I'm under the impression from different forums that they cannot go on pre-facelift models. Can anyone confirm this / explain why? And is there any way i could get one on my car (without using cable ties and duct tape)?

    • 0 replies
    • 1.3k views
  15. Started by KE Troy,

    Hi all I have a ke70 with an ae86 differential fitted, I have broken an axle, I plan to upgrade the rear end soon but I need an axle for temporary use as the car is stranded at a friend's house, if anyone can help or just suggestions that would be great , I'm looking for any one that may have an axle for sale or a possible loan of the axle ? Name your price or poison.. Cheers

  16. At work i see another AE112 with the round headlights. But i see it has foglights and it looks so much nicer to me. Is it a situation of just getting lights and fitting them in. Or is there going to be issues along the way?

    • 1 reply
    • 738 views
  17. Started by ToyotaKyle,

    Hey everyone, new to this board. I have a mass collection of toyotas ranging from a dozen parts ae86's, a collectors condition ae86 and a mint sr5 that was converted to gts but has a bad motor. A few caldinas, hilux, 4runner, and celicas. I am planning to take the sr5 and drop in an lt1 v8 with twin compound turbos (yes four turbos) out the hood with hater pipes mated with a th400 for now as I have many laying around, until i can find a good borg t56 or 6062. This will be a drift / drag dedicated car, and will most likely never see a legal road in the rest of its days. The engine fitment is no issue and will possibly go dry sump to lower the center of gravity …

    • 9 replies
    • 2.1k views
  18. Started by Bluebeast,

    I have a squeak that i can hear while i drive. I'm fairly confident that it isnt a belt squeak because it almost sounds as if it is coming from below the car. The only clue I can give is that there is no squeak in neutral. Only when the car is moving. But the squeak goes away when i put even the slightest amount of pressure on the clutch. Any guidance would be muchly appreciated. Cheers

    • 4 replies
    • 1.4k views
  19. Started by Willobeard_bv,

    Hey guys I'm new to corollas but recently picked up a 89 ea93 sx hatchback and wanted to do a airbox delete and put a pod filter on it the only drama is that there is all sorts of sensors and vacuum hoses on it. Question 1 - what are these ? Question 2 - can i remove them all ?

    • 1 reply
    • 833 views
  20. Started by Bluebeast,

    I'm so desperately sick of steelies on the rolla. I'm also on a bit of a budget so I'm not really looking to pay for shipping from anywhere. Anyone know of wheel shops that stocks a range of 4x100? Thanks

  21. Started by benfti,

    Hey Everyone, first post and recent return owner of a rolla, used to have an 07 which got moved on as the family got bigger, but when the decision was made recently to downsize the 2nd car to a small day to day runner was made, of course Corolla became the car of choice, a friend in Melbourne who was moving overseas was happy to oblige by offering me her soon to be redundant 90 AE92 seca for a very cheap price. I'm happy about this because it suits my purposes with the added bonus that I have been wanting to dabble in a restoration/improvement project for a while and I think a car of this vintage i a good place to start. I actually haven't got the car yet, I'm in …

  22. What you see below is a 2nd gen "F" head with 4 downward sloping intake ports. My client is planning on running about 10#s of boost though this........ More to come........ :D

  23. Started by Bluebeast,

    Gday, I'm having trouble keeping my headlight gasket things in? I have a corolla with the cute little round headlights but the ring that fills the space between the light and the bonnet keeps coming out. I'm not sure if it originally came with clips to keep it in place. Any advice would be much appreciated :)

    • 8 replies
    • 1.6k views
  24. Toyota Corolla AE92 Wagon Duck Tail Making https://youtu.be/sgbLBYLgjsg https://youtu.be/OshyNZe165I

    • 0 replies
    • 874 views
  25. Hi all, Has anyone here fitted modified cams to their N/A Silver/Blacktop engines? What have you found that works or doesn't? I'm sure the basics of cam design apply to this engine in a similar way to others but i'm interested in the three inlet valve, small bucket design and its limitations. Cheers!

  26. Started by eefui,

    Toyota AE101 Wagon Lips Making https://youtu.be/jN849--scYE

    • 0 replies
    • 551 views
  27. Hi. I'm pretty bew to this but I've had a 2001 sportivo for about 9 years and had a couple of turbo problems about 4 years ago. I've finally got the time to actually have a look at the car and it seems I've got a large crack in the exhaust manifold. I believe this is the cause of my "turbo" problem, from everything i know about how a turbo works i think it's a pressure problem and the crack in the exhaustmanifold is the only real problem i can diagnose. Does anyone know where i could get a new manifold for cheap or is it something I'm going to need fabricated?

      • Like
    • 3 replies
    • 785 views
  28. Started by Myki91,

    Hey every one just curious to know what would be a good size set of rims would be? Would i be able to fit 15x8+10 or 15x8+25 on my ae92 rolla? Or what would i need to do to get them to fit?

  29. Started by succulent eye,

    Ok so the car was running pretty good for a while then started having a misfire, so I removed the plugs and checked them to see plug 1 ruined. I replaced it the misfire was good for a bit then it's back again. Checked the plug and it was pure black with carbon. Goes black after a day and I only drive like 10 minutes to work. Just trying to work out what might cause this, could it be a vacuum hooked up wrong ? Bad leads ? Bad dizzy ? I'm lost. So I've come to the gurus, I have attached a photo of the plug that was ruined. Also a photo of the only vacuum I've got hooked up.

  30. Making a light weight door skin for AE80 drag race car. https://youtu.be/K8H4lonodOQ

    • 0 replies
    • 527 views
  31. Started by Craig halliwell,

    Hi all . I have a 1993 ae95r 4x4 wagon and i am havinr dramas locating front strut assemblies. Are there other models struts that will fit straight on? Thanks in advance

    • 1 reply
    • 709 views
  32. Started by loz181,

    ok first post for me other than the diameter of the clutch surface area will a flywheel off a 6 /a carb engine AE90 fit a 4Af/e engine ie the crankshaft bolt holes????are they the same The reason being i scored a carb gear box which has only done 40,000klm i know the clutch splines and diameter is different but need to know whether the bolt pattern for flywheel is same thanks for your help please only reply if you know no guesses or i think so thanks

    • 0 replies
    • 562 views
  33. Started by Bluebeast,

    I'm wanting some bucket seats to make my 98 rolla feel a bit more mine. But the mountings to the car are a bit odd (one mounting hole is sideways) any cheap(ish) bucket seats that have worked for others?

  34. TOYOTA COROLLA AE101 Light Weight bonnet https://youtu.be/d3GA39KXfs0

    • 0 replies
    • 694 views
  35. Been looking around for a good combination of strut and springs (prefer lowering springs) for the 1997 bzg levin and want to know which other vehicle I can swap struts n springs with. I am looking for a low comfortable ride that can handle the road like a beast when asked to

    • 0 replies
    • 681 views
  36. Started by succulent eye,

    I'm after a new o'ring for the 4ac Dizzy. It's leaking oil like crazy, is it a special one ? And where is the best place to find one ? Thanks in advance for the help.

    • 6 replies
    • 2.2k views
  37. Started by eefui,

    https://youtu.be/JkvLh8_E01I https://youtu.be/khKEjVOCYxY https://youtu.be/JmKut3Y49wQ https://youtu.be/7-rG_R5JMeg https://youtu.be/fqrH-Aezo8o

    • 0 replies
    • 761 views
  38. Started by eefui,

    Toyota AE82 Grill Making https://youtu.be/JkvLh8_E01I https://youtu.be/khKEjVOCYxY https://youtu.be/JmKut3Y49wQ https://youtu.be/7-rG_R5JMeg https://youtu.be/fqrH-Aezo8o

    • 0 replies
    • 668 views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.