Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by 1975 KE30,

    Hey guys I just bought a ae92 with a 4afc carby motor in it and was wondering if there is any cheap mods I can do that will increase power a bit, and would it be possible to swap the carby with efi Ps I don't have the money to put a 4age in it

  2. Started by Fishtank,

    Got a 97 corolla seca CSI 4a-fe engine I believe. 155k ks Previous owner only put water in the radiator and now its rusty as. The rad cap also sometimes sticks and when I get it off its clogged up with rust. Would a drain and refill with coolant help at all or should I just replace the radiator and get a proper flush done? Car still runs great don't want it to overheat one day all of a sudden and do permanent damage.

  3. Started by VOLK,

    Hey dudes, bit of a read but please don't vague out half way through and close the tab hehehe :P Just purchased a project which will eventually become my other half's car. AE92 auto w/4AFC, 268 thou on the clock & with what I suspect is a blown head gasket :( Oil floating in the coolant, but no coolant in the sump? I was always under the impression that when a head gasket allowed two galleries to mingle that everything got everywhere? Can anyone confirm this? Weird thing is, the car still runs fine, just was low on coolant when I picked it up. The header tank was basically empty besides oily brown sludge, opened the radiator cap and found more of the same. Fil…

    • 13 replies
    • 16.2k views
  4. Started by henga12,

    I pulled off the thermostat housing and it wasn't there, is there another part I have to pull off, it was getting dark when I was doing it so I couldn't tell properly

  5. Started by Fishtank,

    Starting to get a groaning scraping noise coming from the front end when turning full, or close to full lock. I believe this is the CV joints. Have not had a chance to take a look at the boots yet but my main question is, should I get this fixed asap or can it be left a little while. What will eventually happen if I leave it too long? Anything catestrophic or dangerous?

  6. Started by graysonvario,

    Anyone here had any experience or information they can offer this plenum from a guy in Finland who makes these

    • 6 replies
    • 8.3k views
  7. Started by balaiz,

    anybody know where to get twin weber sidedraft manifold for a bigport bluetop 4age? or atleast bike carbs manifold? been emailing and lurking around for about a week now :( thanks in advance.

    • 5 replies
    • 9.5k views
  8. Started by RollaE7.83,

    I have fresh sr5 86 hubs and bearings. Will they fit on my 83 ae71 struts? I test fitted them and the spun fine but got stuck on there. Had to yank the shit outta it to get it off which is why I feel it's a different bearing size between ae71 and ae86

  9. Started by Sx1973,

    Hi guys I've just removed my leaking pump and am looking to rebuild, can anyone shed some light just so I don't make a mistake, found rebuild kit on eBay.

    • 0 replies
    • 13.5k views
  10. Started by Twincam16seca,

    Hi all, My brain has been ticking over since I have had the body work and paint done on my Rolla and the guys at the work shop have said I should put a 1j in it to match up with the rest of the car. I have thought about it before as I really like the 1jzgte vvti motor, but the thought of the extra weight and placement of the engine puts me off as I don't want to cut anything! That aside, it would make 200+rwkw very easily and reliably more so than a 4agte, which is why I'm still entertaining the idea! What I thought was, if I went 1j I would probably go to/stay auto, but I'm not really a fan of 4 spd autos, so what about a ZF 6spd auto from a BF-FG Falcon? Has anyo…

    • 12 replies
    • 19.4k views
  11. I've recently purchased a daily-able FX16 so I don't have to use Surreptitious(AE71) all the time... I named the FX "Skippy", and knew upon purchase that it didn't run. This is what was found when the head was pulled... something broke, and eventually got embedded - see arrow So.... OST-032 is Skippy's new head! stripped and ready for cleaning........ Can anyone tell me why one chamber is already clean???? More to come..... :D

    • 19 replies
    • 192.3k views
  12. Started by Twincam16seca,

    Has anyone run a power enterprise pe1420 on their 4agte? It seems like it's good on the sr20's for about 220-240kw and really good spool,just wanted some opinions!

    • 6 replies
    • 28.5k views
  13. Started by headache99,

    Hi guys new here any of your knowledge appreciated. i have a 94 toyota seca liftback had new head fitted after crack in the previous one COSTLY. about 9 months later a heater hose blew but car did not overheat.Hose replaced all good. Problem I'm having is very hard to start first thing have checked plugs etc,also whatever it is affects the idling it's way high up to 2000rpm sometimes drops as engine warms up not always. also losing coolant very slowly no sign of where from no sign in oil and no visible leaks.also when first fires very rough for the first 5-10 seconds then ok. ANY IDEAS ?

      • Upvote
    • 7 replies
    • 26.5k views
  14. Started by twincamcrazy,

    Hi everyone, I have a dilemma with a distributor from a 1990 fxgt that has a destroyed shaft etc, and have purchased a 2nd hand one, but the internals are different as well as the shaft. My one has a cam lobe type shaft top, and the one purchased has a 4 point shaft top, also my one has a different connection with 4 wires, and the purchased one has a connection with only 3 wires, or can I run the one with wire changes? Can anyone tell me if these are interchangeable, they are both definitely 4age, and look exactly the same from the outside. Thanks

  15. Ok so I am currently running a 20v blacktop in my GT-S. I bought the coolant conversion kit from SQ and a tweaked performance wiring harness. Everything was smooth sailing until I realized that the block off plate on the back of the motor only houses the ecu temp sensor and the coolant temp switch (white). I was told that the switch isnt needed..makes sense why there isn't a harness side connector for it...but it fits perfectly in the block off plate. On the other hand, the coolant temp gauge (gray) I was informed that I needed...but have no place to put it....but has a harness side connector. Main question is where do you guys have this sensor mounted, it looks to just b…

  16. Started by mmu16,

    Anyone in Vic got a working silvertop installation? Want to check if my vacuum lines are set correctly. would appreciate the opportunity to swing by and compare connections.

    • 2 replies
    • 67.4k views
  17. Started by Shrike,

    Hey All Have read through the pinned thread but not really getting any clear answer I am looking at buying a set of 15X7.5" rims with an offset of +20 (Tbh I would rather a narrower rim and tyre up front but still looking at options) Will these fit in the front and the rear guards? Car is currently stock height but will be getting lowered in future (Lovell sport lows so nothing super slammed) I have a guard roller and am happy to roll/flare the rear guards a little if I have to Tyre's would be 205/55R15 as I am a believer in keeping things legal Am trying to track down some XT130/RT132 struts to do a hilux pug conversion later on as well Ap…

    • 8 replies
    • 54.4k views
  18. Started by Mbfixinit,

    I have a AE96 Seca RV, my daughter decided to smack up the back of someone. I want to fix it but the parts are hard to find. Can I use AE94 Seca body parts? In need of Bonnet, LHF guard, bumper, LH side light, both headlights, grille, radiator and fan, bonnet lock, ac core, and fan. AE94 parts are easier to get. Thanks mates.

    • 0 replies
    • 42.2k views
  19. Started by ausca62,

    Hi Guys, can anybody help me with a manual trans workshop manual for an ae82. pdf format would be great but if not even exploded view's would help.I have a heep of manuals but none have the FWD gearbox. Cheers. Paul.

  20. Started by normgale,

    Hi folks, just wondering how hard it is to put an 7A-FE into the place an 4A-FE will come out of? From all evidence, with information in the trusty Gregory's 271, they are exactly the same engine block etc.

    • 5 replies
    • 123.3k views
  21. Started by Twincam16seca,

    Hi all, Just wondering if the Ebay Alloy radiators are worth it as I'm going 4AG-TE in my AE71. I currently have the original 4ac and it was fitted with a thermo fan, http://www.ebay.com.au/itm/FULL-aluminum-alloy-radiator-toyota-Corolla-AE71-AE72-/261213476702?pt=AU_Car_Parts_Accessories&hash=item3cd189575e&_uhb=1 With the increase in power I am assuming I will need a better radiator. If there is anything good/bad to know about them it would be nice to know!

    • 10 replies
    • 134k views
  22. Started by adelk,

    ive got a 101 seca . and thinking of purchasing a 4age. to replace my current 4a fe. will i need new mounts? and a new gear box ? ?

  23. Started by ausca62,

    Hi guys, I want to lock the diff in my wife's Seca. I would love an LSD but for the $$$ I have been told by a guy that a mob in Dandenong do drive shaft upgrades. I think with camry CV joints. Has any body on here herd of this or what do you do.?? Does anyone have an LSD for sale?? Cheers. Paul.

    • 2 replies
    • 103.5k views
  24. Started by frosty,

    Just wasted a 120 klm round trip to get some 15" corolla rims from a 2006 model ~ the PCD was only 100 ! When did that change from 114.3? Does anyone happen to know which car I can easily source some 15 inch rim of 4 x 114.3 pcd like these corolla ones? thanks

  25. Started by Fishtank,

    So my temp gauge on the dash reads about one point up from cold during normal running conditions (ie driving at 60kmh or over). In stop start traffic and only on hot days will the temp gauge make it up to the middle of the gauge. On colder days the gauge won't even read above about 1/4 in stop start traffic. Is this a bad thing or a dodgy temp sensor that should be replaced? Will running "cold" have any negative effect on the engine or fuel efficiency? I get 500-600 kms per tank doing roughly 50/50 city/highway driving so it seems pretty good. (7-8L/100km) Thanks!

  26. Started by Fishtank,

    Just curious as to what model my corolla is. I am pretty sure it is an AE1xx but not 100% sure. How can I tell? Is there a stamp on the inside of the engine bay or is there some other marking I can confirm what model it is and also what engine type? Thanks!

  27. Started by KE70+AE92,

    Hey guys Just a quick question with a ae82 exhaust fit on a ae92 I've got given a full exhaust off a ae82 seca and I just wanna make sure before I pull of my hole exhaust that it will fit, btw I have a ae92 seca Thanks

    • 0 replies
    • 133.9k views
  28. Started by oldeskewltoy,

    I recently was sent a 20V Blacktop (Noir Crowning) head...... so once unwrapped and set up on the bench.... inspection begins.... Over all the casting quality has gotten much better. Although there still is port-bowl-seat shift, the shift amount - at least in this head, is minimal. There is one REALLY, and I mean REALLY odd ball bit........ the 3 intake valve seats have NO semblance of an even 3 angle... Looking into the Blacktop service manual the 3 angles are suppose to be 30, 45, 60. Well the throat cut - 60 degree cut, in essence is the bowl angle and so the back of the port (highest pressure area) has no effective throat cut, whi…

    • 11 replies
    • 214.8k views
  29. Started by It's_AUDM_Yo,

    Hey boys Wired up a Small port ae92 4AGE into a friends KE70 and I'm having this weird issue. It turns on really quickly as it should and idles really well at about 1000rpm ( Definitely one vacuum leak) but slowly deteriorates after about a minute. It used to idle for as long as we liked (10mins+) but had alternator issues at the time Also the car stalls almost immidiately after opening the throttle body more than like 2mm's I assume its a wiring or sensor issue but I'm not sure and It won't seem to idle long enough for diagnostics mode Have checked so far: 2 different MAP sensors The timing is fine Battery is being charged at ~14volts TPS unplugged made…

  30. Started by anoor,

    how to take out sc12 pulley in 4agze ?

    • 0 replies
    • 192.4k views
  31. Started by buzzook,

    Hey guys! Had the OEM rad cap fail in Feb, six months ago. Replaced it with an aftermarket one, CPC brand. This appears now to have failed also. No oil in water, no water in oil, when engine oveheats is *definitely* venting via overflow pipe, and surging, in bursts - like pressure builds, releases, builds, releases... So pretty certain it's cap, not air bubble, thermostat or head gasket. Had a closer look at the radiator, and the eges of the orifice against which the cap is supposed to seal are *very* rough - a degree of corrosion on the rim of the orifice. My *guess* is that this corrosion is not helping the seal, and may be allowing the rad to br…

    • 0 replies
    • 118.8k views
  32. Started by balaiz,

    looking to fit some weber 45 dcoe to a silvertop. can't find any manifold for it. they usually only sell manifolds for 16v. would the bolt pattern from a 16v manifold be the same as a silvertop 20v? thanks. and i know its a downgrade but not much people do it so ill do it..

    • 7 replies
    • 117.5k views
  33. Started by Breakfastskippa,

    Has anyone lowered their ae92 before, liftback in particular.The coilovers i bought have a bracket for the sway bar end link but the end link is not adjustable so the coilover basically has to sit at stock ride height to fit, just curious if anyone has found a way around this.

  34. Started by george_ga70,

    Hey guys I cannot for the life of me find the tyre spec sticker on my car Does anyone have a pic? Model ae92r-hmvfb

    • 0 replies
    • 117.8k views
  35. Started by zedoc,

    Hey everyone, I have been looking at buying an Ae112 levin front lip and may have located one, I'm just wondering what is a reasonable price to pay for it? Any chance someone on here is selling one? Thanks in advance guys.

    • 0 replies
    • 137.5k views
  36. Started by sherg86,

    Sorry in advance for this noob question. I jus got a tomei 2 way lsd and broke it in. I need to do the first gear oil change, the performance shop nearest me where I was gonna get motul from is closed for the weekend and the 86 is my daily. Can I rock mobil 1, castrol, royal purple so long as theyre gl5 & 75 80-90??? Please advise, for those of you running a tomei technical trax 2 way, whatve yall done?? Thanks, Paul

    • 7 replies
    • 109.7k views
  37. Started by AE71bangbang,

    I bought an AE71 1.6 manual iv had the carb re tuned and timing done but now i have an issue that while driving its trying to stall/hunt,, it keeps going still has power but randomly it plays up like it has stuff in the fuel?? the car sat in a garage for 2 years before i had bought it could it be a fuel issue or points issue maybe?

      • Upvote
    • 3 replies
    • 138.4k views
  38. Started by ausca62,

    Will a T40 bellhousing bolt onto a T50 box?

    • 7 replies
    • 159.6k views
  39. Started by Jelterkun,

    Hello rollaclub. I am currently at the final stages of building my ke70 4age 16v and i was wondering if the blacktop clutch and flywheel are interchangeable with the 16v engine. What is the benefit or effects with this mod. And what do i need to complete it? - blacktop clutch kit, flywheel - 16v clutch fork - 16v throw out bearing? Thanks in advance

    • 1 reply
    • 126.1k views
  40. Started by Joffrey,

    I just recently bought an AE71 with a 4A-GE conversion. Wanting to put in coil overs, front strut brace, sway bar. Just wondering what people would recommend and what to steer clear from. Thanks

    • 11 replies
    • 112.2k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.