Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by conan,

    I put a new clutch in my ae71 its got a fwd bigport engine with a t50 behind it putting the new clutch in did nothing maybe even made it worse. I replaced the master and the slave just to try and eliminate all options before dropping the box put again... Still no good (sigh) so last night i dropped the box again and the fins on the pressure plate looked twisted or warped the clutch i bought was for a ae92 so ot didnt come with the right thrust bearing so i got the right one but now I'm not sure if the pressure plate is right or of the clitchs match up or if anyone has seen the fins all contourted before also when i undid the pressure plate the fins all went back into plac…

    • 3 replies
    • 19.1k views
  2. Started by Gotowo,

    I have recently bought a 2000 model Corolla Ultima. It has a factory fitted alarm system and I guess it works fine but it's annoying as all hell. Can't leave keys in ignition etc, etc. What I want to do is totally disable it, but don't know how. Have read the owners manual supplimentary notes for the alarm but it doesn't explain how to totally disable. Can anyone please help? Thanks.

    • 0 replies
    • 16k views
  3. Just bought a little blue ae with a few problems... The biggest one is the clutch pedal u need to push it a little beyond the floor to make it engage properly n i don't know how to adjust it theres a few bolts on the pedal box or am i best bleeding the hydrloic line... Then theres the box its a t50 but it is pretty hard to get from gear to gear the guy i bought it off said the little plastic round bit on the end of the shifter is worn so how do i fix this... The last problem atm is it idles at about 2000rpm n the idle screw wont go any further in so is a new throttle sensor or could it be the cut n shut throttle body any advice would b awesome cheers

    • 16 replies
    • 31k views
  4. Started by Synikal,

    Hi guys i'm new to the forums i was just wondering are AE92 hatchback headlights and indicator setup the same as the AE92 sedan headlight setup??

    • 2 replies
    • 18.9k views
  5. Started by rollaboy92,

    Hey all just wondering if anyone knows if a manual gearbox from a 1.6L ae101 will fit a 1.6L in an ae92. Any help will be much appreciated. Cheers

    • 2 replies
    • 23.4k views
  6. Started by Nic93,

    Hey guys, I have an AE92 gti corolla I'm working on, I was wondering if anyone had, or knew of any places that had the matching white with red pinstripe bumpers. Its obviously been in a fender bender before with the previous owner, and has the barina black bumper with purple pinstripe - looks tacky. I'm in the South West in Bunbury, not sure if any ones from around here :) will put pics up soon!

    • 1 reply
    • 25.5k views
  7. Started by buzzook,

    Hi, all! My AE102 auto sedan has almost 240,000km and as far as I know (was my mum's before me) has never had an auto service.....maybe fluid change....dunno for sure. Want advice on what can be done DIY...can't afford to pay mechanic. Is there a filter that can be changed? Gaskets? How difficult is it? Am moderately competant mechanically [eg: changed the clutch on my old KE55 by myself - and it did work afterwards.... ;) ] Is there a thread on here that might assist me? Tx.

    • 0 replies
    • 13.5k views
  8. Started by omni86,

    Will a ae82 fx gts wiring harness, primarily engine bay harness fit a ae86. Sr5 to gts conversion. The ae82 is 3.5in wider from strut tower to tower. The ae86 body is only about 6in longer. As far as the engine bay harness would fit, maybe front lights extended. Anyone familiar with this harness swap? Ive heard the ae92 harness needs extending to be used. thanks for any input.

    • 0 replies
    • 15.4k views
  9. Started by On320V,

    Hey guys I'm after I coilover kit for my SX Seca! I have looked at a lot of websites and made the same amount of phone calls to try and find a coilover kit that fits my car. Hardly anything seems to be on the market. Am I able to cross reference? Please help?

  10. Started by m00nee,

    Hi, Was wondering if the power steering rack is interchangeable between an AE82 and an AE92. Only asking as both the rack and pump are leaking on the daughters Seca and I have the choice of converting it to manual steering or replacing it with the parts from my AE92 parts car. Thanks m00nee

    • 0 replies
    • 16.1k views
  11. Hey guys , I have a 1995 Toyota Levin BZ-G and its time to change the shocks , i tired to search the part numbers of the OEM shocks and did a search through other domestic range of Corollas to find a similar part but i could not find any . Just wanted to know if the AE112 Suspension (Shocks, Springs etc. ) are the same as the AE111 Levin (JDM) ? ( my levin is not the superstrut version )

  12. Just wondering what the difference is between the 2 struts??? Is it brake size or shock insert diameter?? Just curious if somebody could tell me that would be greatly appreciated :) Tim

    • 2 replies
    • 17.3k views
  13. Started by ToyRolla71,

    Hey guys so my 4age 16v has just gotten back running, It has a bad leak in the extractors due to a snapped stud in the block. It also when it warms up starts to beep at me. The beeping varies in length when i use the clutch... I'm not to sure why? Any clues?

    • 4 replies
    • 16.6k views
  14. Started by smp009,

    Hi all i have a 1987 ae82 corolla hatch,i am looking to replace the rear drum shoes,but according to the people at repco,theres is like 4 or so to choose from i am just wanting to know what is the most common (example bs1065)? and do they actually interchange? like if i get the wrong shoes,will they still fit?or what do i have to do to make sure i don't get the wrong ones?any help would be great thanks

    • 2 replies
    • 17.8k views
  15. Started by slipn,

    As per topic title Will Ae86 sway bars fit an AE71?

    • 6 replies
    • 21.7k views
  16. Started by Boosted,

    Ripped the gutter trims (can't rail mouldings according to some) off to do the re-spray. Went to snap them back on, only to realise that they're pretty much stuffed. Rubber's all flaking away and they won't stay in place. Spoke to Toyota, they have them, but they're holding them ransom for $168ea :notimp: Also looking for the outer window weather seals (Door Belt mouldings according to some). The prices on those are much more reasonable, but they don't have all of them in the country and one they couldn't find a listing for, so not sure what that means in terms of availability. Seen complete sets on ebay pretty cheap, just not for the AE92. Anyone got a lead, or names …

    • 0 replies
    • 15.9k views
  17. Started by darkage,

    I was given a free Corolla AE92 91 or 92 model with 4AF engine I think. I was going to bring it up to RWC for my wife to learn to drive and to use as a cheap run about, but I came across rust around the windscreen. I've looked under the rubber and used a screwdriver to pick at it to see how bad it is.. looks like its mostly surface rust with some spots here and there with a 1 mm or so of rust flaking off.. I think where it flakes off is probably where the rust holes are leaking some water from the top into the cabin.... Pretty much right around the rubber seal is rust to some degree. Theres a crack in the windscreen on the drivers side, if it wasn't for that I w…

    • 14 replies
    • 55.5k views
  18. Started by willseca,

    Hey, am new to the forum and have just obtained an AE92 seca, i have sourced a set of 15 inch (4 stud) steel rims from a ZZE122R, i presume they will bolt straight on to my seca (to replace 14 inch rims) am i correct?? Thanks! :) Also, i seem to have a leaking heater element what is the best way to get to that?

    • 4 replies
    • 16.7k views
  19. Hey guys, Just picked up a 1991 Holden Nova hatch, i.e. an AE92 Corolla (I think?!). The piece of wood covering the spare wheel is pretty much useless as it's so old and broken... it's not complete either so trying to copy it is too hard. Does anyone know where I could find a template for the wooden cover so that I could make my own out of mdf? Thanks a lot!

    • 7 replies
    • 15.2k views
  20. Started by ToyRolla71,

    Hey my ae died on me a couple of weeks back. At the time we didnt know that a wire was pulled out of my microtech, by the time we realized that someone had pulled out my dizzy and not my timing is destroyed. I'm not sure if thats the only thing stopping her from starting, she has fuel and spark, my surge tank is apparantly going ok. She turns over and sounds like she wants to start but then doesnt. (my battery may be dead now to) :( Is anyone on north brisbane that may be able to come have a look? Thanks!

    • 1 reply
    • 11.8k views
  21. Started by 67Rolla-Ken,

    Howdy all. A friend has a blown tail light on their AE101 sedan, we are trying to get the light out to replace and I'm struggling with the 2 clips on the inside (have undone the 3 bolts). Is there any trick to them or just use brut force??

  22. Started by styler,

    Original but worn interior, otherwise complete including motor. Mostly good panels, paint, factory mag wheels and all glass there. Haven't seen many half decent rollas at wreckers for the last few years so thought I'd throw this up there before it gets crushed...

    • 0 replies
    • 11.3k views
  23. Started by Addicted,

    A friend has a motor for sale 4A out of an AE71, will this bolt up like a FWD 4A using my mounts or are the blocks tapped differently. Thanks

    • 2 replies
    • 14.2k views
  24. Started by Addicted,

    What is the best way of removing a front bumper on an AE80 hatch short (not seca) I want to put the driving lights near the grill and don't think I can get my hand under the bumper to do the nuts up Thanks in advance.

    • 2 replies
    • 12.2k views
  25. Started by Des,

    I didnt get the oxygen sensor with my half cut because it was on the exhaust not the headers so i need to buy another one. A piece of wire is more usefull than Repco, Auto1 and Autopro put together, So does anybody have a part number or anything for the 4agze o2 sensor ?

    • 4 replies
    • 14.6k views
  26. Started by adelk,

    hay guys can get a ae71 for 1500. with origianl 4ac. only problem is the diff is making a noise. should i get this. ? how much would it cost for a engine conversion to a 4age ? or would i be better of just dropping a 4age into my seca since its jsut put in and bolt in.

    • 13 replies
    • 14.1k views
  27. Started by phwoah,

    i have seen a lot of people on here have done a 32/36 weber conversion on their 6af engine but for the life of me i cannot find a single place where i can buy the weber kit can someone plz help me out

  28. Started by Boosted,

    In the middle of stripping and painting the new hack, taking a lot longer with all the hot weather we've had lately, but that will happen in summer I guess. Anyway, I've pulled the rear quarter air vents to give them a quick rub down and spray. They look to be die cast steel so some description and really are quite heavy for the job they're doing (typical Toyota). Wouldn't save a lot of weight, but every bit helps, anyone seen these available in fibreglass ? Not worth the hassle to cast my own for this project, but if I can buy them from somewhere I'd be all about it.

    • 1 reply
    • 15.6k views
  29. Started by phwoah,

    hi guys i am new to the front wheel drive world and have no idea what to do to my nova hatch. its a 6af engine carbied and was wondering if there is some simple engine mods i could do to it and where i would find the parts and if it is possible to put power steering in it and what would be needed. can't find anything on ebay or anywhere else for that matter for the 6af but a lot for the 4af, would these parts be interchangable. don't tell me to do a engine change cause i have a 4agze but will be some time till i do the conversion so am just looking to beef up the 6af for now

    • 12 replies
    • 17.8k views
  30. Started by BmstKe70,

    I know this has been asked so many ʞ©$ɟing times, but I need a run down on how to do this, weather you want to link is a link, or give me a basic run down, would be greatly appreciated :)

    • 1 reply
    • 9.9k views
  31. Started by Boosted,

    Just purchased a bonnet from an import AE92 Corolla with the expectation that it would bolt up to the Australian spec AE92. Unfortunately a quick inspection reveals some differences particularly around the lights, but I haven't got the car assembled enough to be sure. Just wondered if anyone's been thru this before ? Worst case I'll rip the scoop off and attach it to the Aus spec bonnet, it's only for a khana car.

    • 4 replies
    • 17.3k views
  32. Started by Tazrolla,

    I have just put another 4age engine into my ae82 and it purred like a kitten for a frw weeks however the battery i had in it was farked and (don't ask me why) but i tryed starting it quite a few times on the farked batt, i have since tryed the batt out of another car(fully charged and in good working order) and now the rolla work start via the key... It will start when i roll start her but it runs poorly and i have noticed that the tacho(in dash one) behaves weirdly(shows less revs when i rev it) it also when engine is stoped and i go to start her i have noticed that the engine light and oil light are dim as i turn keto pre start position... I am thinking i might have dam…

  33. Started by DRFT-KE,

    Hey all, I'm able to score a front chrome front bumper from a ke70 panel van and I'm wondering if they'll fit on ? Also same question applies to the rear aswell. Cheers

  34. Started by nick88,

    Hey guys, i needa get a clutch for my AE82, it sticks a little when changing 1-2 flat out Its got the small port motor fitted, but kept the original gearbox, should i be going for a clutch kit to suit the ae82 or the ae93 the motor came from? 200mm or 212mm?? I'm thinking of getting the exedy HD kit, either the TYK-6279HD or TYK-6932HD just not 100% sure which one to get, or do i just bite the bullet and get one n hope it fits? Thanks

    • 2 replies
    • 8.1k views
  35. Started by Psi_rolla,

    Hello everyone I couldn't find my answer anywhere so I was wondering if you could help me out. Assuming the motors are both 4afe could I take parts from a ae92 and use it on ae94. Primarily, brake rotors and pads? I can't find many ae94 rotors but 92 are plentiful. Thanks!

    • 1 reply
    • 6.7k views
  36. Hi all just wondering if they are the same, reason being I'm doing an sr20det conversion on my ke70 and I have found this kit http://www.jspfab.com/catalog/i60.html I have an ae71 engine sub frame and I don't feel like spending this money just to get it and it not fit Cheers tom

  37. Started by ROLINmonkey,

    Hi all I'm clearly new here and am in need of some help and/or advise. I have just got myself a 1988 gtfx 1600 4age 5 speed manual. now the car is overrated but the clutch feels like it's sticking and ridding. when i'm driving i can feel the clutch is not right when i'm driving. that and i can smell the clutch when i stop. what is the best cost effective options i have?????? any advise or help will be awesome. thanks. D

    • 5 replies
    • 14.9k views
  38. Hi Guys First just want to say how awesome and useful this forum is. So many brilliant topics Just want to know if anyone knows the problem i have. Ive just purchased me a work hack for 1500.Good score because it used to be grannys old car. 1993 toyota corolla sedan. Problem ive been having lately is that it doesnt always start. I'm finding that when i leave the car for more than 12 hours, I'm always having to get someone to jump start it for me. Ive had the car checked out at the auto electricians. They had removed a immobiliser which was installed in the vehicle.They told me everything else was fine and that it should be starting. 2 months later its stil…

    • 17 replies
    • 14k views
  39. I have a 1990 Geo Prizm, I know I know. I have had the car for over 10 years, actually had many of these and similar Corolla's About a year ago, and 12,000 miles ago I put this engine into the car. Installed a New FelPro Head gasket, Torqued to spec etc. Last night, I blew the head gasket during normal driving, on 3 and 4 both have water, and coolant had exhaust and gas smell in overflow bottle. NO WATER in oil or on oil cap. My Question is. I have always used Fel Pro gaskets on these, has the quality changed or should I be using Beck-Arnley etc. Looking for advice on what you guys use before I order gaskets, or a set as I might re-do valve seals as well…

  40. Started by ToyRolla71,

    Hey guys, I havent been on here long or for a while and i didnt rally know where to post this. But i have a red AE71 and i was wondering whats a good set of wheels that look good but also have a fair amount of dish? Thanks!

    • 7 replies
    • 20.2k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.