AExx Corolla Discussion
1398 topics in this forum
-
i blew the head on my 7afe in my 1992 corolla and i wanna put a 4agze in it I'm looking for one with not to many k's and i want the gearbox to but i also need to know how different the engine mounts are aswell cheers
-
- 0 replies
- 1.7k views
-
-
Firstly, yes I've done a search & haven't been able to find anything to help me, so I'm turning it over to you all for help. :) I just pulled the C40 4 speed manual out of my AE80 & replaced it with a C50/52 5 speed (not 100% sure which) & I am having issues with selecting gears. The clutch engages & disengages fine in the gears I can select, I don't think it would require bleeding as I didn't disconnect the line during the process? The gearshifter will not move across to the left (looking down at the gearshift H-pattern) enough to engage 1st or 2nd with that shift cable connected, nor will it engage reverse when all the way to the right & pul…
-
- 4 replies
- 5.2k views
-
-
i am just wondering if anyone has lowerd there ae92 corolla and how long did it take you?
-
-
- 17 replies
- 12.1k views
- 1 follower
-
-
hey guys got 2 questions to ask any help is appriciated 1 question is , where could i or does any no people that have spare door decals for a 92 seca sx id like the ones that say "seca sx " iv seen *sx twincam 16* on ebay but like the look of the first ones i said =C 2nd question is has anyone fitted a gze scoop to a 92 corolla and what was the easiest way u found to mark up the skrews and what not cheers for any help brad
-
- 0 replies
- 1.9k views
-
-
-
-
Hi I'm new if anyone knows where i can find 2" lower than standard shock absorbers for a ae92 corolla (Holden nova) please tell me where i can find i have been looking everywhere for them but can't find mutch anyhelp would be greately appreciated. Thank You Kale
-
-
- 3 replies
- 10.6k views
-
-
wanna put a 2L engine in my AE71 what would be a good choice people??
-
- 14 replies
- 7.3k views
-
-
Hey guys, I'm new to the forum, my name is Hannha, I'm not 'really' into cars, more like into keeping them maintained to prevent later damage and high repair bills :P I have a 'new' 99 AE101, that is in the urgend need of a fluid change and wheel swap. The thing is, I know how do that all, have done it before on several other cars, but I have never had so many problems finding the friggin' points for the jack stands! If anyone knows where they are please send a short reply, my fingers are itching to get this done, but I am too afraid to get under there without knowing that my jack stands (I use an hydraulic jack) are safe! Till know I've bought a Haynes manua…
-
- 11 replies
- 21.7k views
-
-
Hi all, I have an AE92 that 'squeels' from the front wheels when driving under 40 km/h. I've spent about $850 so far trying to fix this problem but it is still there... The squeeling sound started after a blown tyre, which blew about 200m from home, so I drove home on it and changed in the driveway (stupid I know, but could be part of the cause?). Took it in to get two new front tyres and a wheel alignment, and about a week later it started squeeling from the front left wheel when slowing down at lights, whether I was braking or not. It appeared to have a slight grinding sound that matched the rotation of the tires as I slowed. It has since gotten progressively wo…
-
- 9 replies
- 17.1k views
-
-
Hey guys was wondering if there were kits i can use to convert my drums to discs hopefully doing an engine conversion later on and require better braking cheers
-
-
- 10 replies
- 7.8k views
- 1 follower
-
-
HEY guys itryed to put a 4k in my ae71 yesterday i got told that if i used the 4k engine mounts it will fit but it don't and my old engine mounts off a 4age can't bolt up to the motor so any one know how to help?
-
-
- 17 replies
- 10.1k views
-
-
Hey guys On my 1998 corolla hatchback the left rear brake is squeaking when driving slow and goes away when I hit about 50km/h When it happens if I put the handbrake up just a tiny bit (not enough to turn light on) it goes away Also if I pull the handbrake right up just before it locks the wheels it's extremely loud abd squeaky I'm not sure what is causing this but it's becoming quite annoying hopefully someone knows what I can do Thanks
-
- 11 replies
- 5.8k views
-
-
-
-
does anyone know the recomended points gap for a 4ac?I'm replacing the points and don't know the gap.
-
- 2 replies
- 18k views
-
-
Hey guys, As the title sorta states, I'm in need of an interior fan/heater box unit for an ae86 and having trouble finding them. So will the fan/heater box from an earlier rolla fit in? or are they totally different? T18 firewall looks very similar, maybe that may work. Thanks for any help. cheers josh
-
- 1 reply
- 2.8k views
-
-
hey guys.. just need to know if a KE70 engine will go in to a AE71 with no worries???
-
-
- 12 replies
- 5.5k views
-
-
Hi there. I am/was the 'proud' owner of a red 1994 Ae102, 5 speed manual Toyota Corolla sedan. This vehicle was my first vehicle and I have owned it for nearly two years. A few weeks ago, a friend of mine lost it in the wet and did some nice damage to the driver's side, front end. The drivers side front guard, bumper and bonnet are damaged beyond repair as is the front engine bay cross member and shock absorber housing. 18 months ago the vehicle was re-tinted and had 4 brand new Monroe GT shocks/struts fitted - smoothest ride. The vehicle has only done 215600km's and hasn't missed a beat since I've owned it. The interior was meticulously maintained and all is …
-
- 1 reply
- 4.6k views
-
-
Hi I have a AE92 and today I went to get the air con re-gassed, but unfortunantly there was a small hair line crack where the air conditioning lines connect to the condenser just behind the right headlight. The hair line crack is about 10-15mm long and starts from the lip. Tried a thicker o ring but still leaking slightly. Is there anything out there or a product that can repair the crack such as aluminum welding it from the outside? or should I just replace the condenser?
-
- 1 reply
- 5.8k views
-
-
Hi, I'm from Norway, so my english is not the best but, I'll try to explain: I hava just recently bought a Corolla as my first car, but have seen some rust in the canals on both sides, it's so rusty it have became a nice little hole in there... Any1 know a really fast and easy way to fix this? I'll try to upload some pictures of it here later if I can. This is my car: As you may can see, it's some tape and a bit rust on the hood too, some1 knows how to fix this verry easy too?
-
-
- 37 replies
- 53.9k views
-
-
Hi guys, anyone have a copy of the workshop manual for a 1990 AE-92 hatchback. I've been searching the internet but found nowhere to download a copy for free.
-
- 18 replies
- 242.3k views
-
-
I've added a second hatch to the family an AE82 which runs a 5spd manual. My Girlfriend is going to learn how to drive in this car so I am expecting a F*@ked clutch sooner or later. The problem I have is will the Gearbox come out by itself or does the engine and box need to come out to do a clutch. Thanks in advance
-
-
- 7 replies
- 6.2k views
-
-
Does anybody know where i can buy the backing/sandwhich plate for rwd application 4age to t50 gearbox..
-
- 4 replies
- 4.1k views
-
-
so i've just got myself a ae90 hatch and I'm having trouble working out what engine is actaully in it! thought some one out there might have a better idea! so on the vin plate it has 6-AF (the 1.4 DOCH) But in the engine it has a sticker saying "4A 3m/t"? and on the rego paper it has for the engine no. 4A9144979 so with a quick bit of research (wiki) i think it is a 4AF DOHC 16v? as the photo is the exact same setup on top to look at! but the 4Af never came out in a car in australia! so i've got no idea whats going on! other then possable jap import engine? but who would import a carbie 4A engine?
-
- 4 replies
- 5.5k views
- 1 follower
-
-
Hello all, I know people are going to say do your research etc i have looked around but its easier to grasp concept when your the one doing the questions. iwas wondering to do a engine swap to say a 4age or to do a black top 20v conversion what sort of cash would you be looking at and divided into what its being spent on, or even for a sr20 into a ke70 , hope to hear back thanks
-
- 6 replies
- 22.7k views
-
-
-
I want to drop in a 20v silvertop or a redtop into my 1991 hatchback ae93 toyota corolla , what is involved in the process ? would i have to change the engine mounts or anything like that? will the 20v drop straight into my car? thanks for your timee
-
- 3 replies
- 5k views
-
-
Ok so I got my Tomei Poncams into my bigport 4AGE tonight, and set all the valve clearances to spec. Reassembled the motor and tried cranking it over and it wouldn't start, when it eventually did I had to keep my foot on the gas and keep it at about 1500rpm to keep it running otherwise it would conk out. It also sounds like a unhappy rotary at the moment. So the tomei cams came with two manuals, one's got the cam specs on it and the other has instructions. The instructions say the poncams are designed to run on stock valve timing and valve timing set up isn't required, therefore I set them to the stock set up. I set my ignition timing statically to 10deg BTDC while I …
-
- 3 replies
- 12.7k views
-
-
AE92 Toyota Corolla Seca, blows air fine, heat is working well, just not cooling, so I suspect it's time for a regas. Was planning on getting one of those DIY refrigerant kits, can anyone recommend a good brand? EZ Chill appears to be very popular, however I will go with what people here use. Also since this is a '90 model: 1) Would I need to get an R12 refrigerant? 2) Is there any way of finding out whether the A/C unit has been modified to use R134? The reason I ask is because I've only had this car since mid last year, so I have no idea if it's been changed over to re-gas with R134. Thanks.
-
- 3 replies
- 10.4k views
-
-
just installed an ae71 csx tacho dash in my ae71 cs,connected everything up how it should but tacho doesn't work.help!
-
- 3 replies
- 2.3k views
-
-
So, I'm getting close to finally dropping a 4age into my ke70. The motor is a small port and currently has a RWD alternator mount (the one under the inlet manifold) and is running the standard 5-rib cogs on the alternator, crank and water pump. The motor will be running without air-conditioning and power steering. My question is; is there an off the shelf belt to suit my current water pump/alternator set up? Is there a part number? If not, what have you done to substitute this? Thanks. Edit: I'm in Brisbane if anyone can recommend any places.
-
- 3 replies
- 6.4k views
-
-
help, struggling to undo the righthand drive shaft nut. will not budge.i take it is an anticlockwise removal. also, once undone, will the drive shaft just pull out from both ends? any help greatly appreciated eric
-
- 13 replies
- 7.1k views
-
-
I was Wondering if a 4AGE or 4AGZE Head Would Bolt Straight on to a 4AFC Block, Or with minimum Modification.. How ever Keeping it Carby... she already currently has a V8 Twin Carby Self Modification. And a set of After-market extractors with a Custom 2" Cat Back Sports performance exhaust system (Sports Performance Muffler)
-
- 8 replies
- 6.8k views
-
-
gear changes in my 91 Corolla AE95 AWD 5spd manual are difficult without assoociated crunching, this happens in most of the gears except 4-5. i've only had this car for a few wks and guess the synchro must be stuffed? is there any oil that may help smooth out the gearchanges? the owners h'book doesnt help at all giving no indication about what oil to use... so help pls
-
- 9 replies
- 15.6k views
-
-
Pretty much, as the title says, looking for some cheap mods that will give the engine a tad more power. The only that has been done is a new 2.5" cat back exhaust system. Open to most things. I don't want to turbo the car yet, still want to drive it as an N/A car. :) Anyway, any ideas are good. :)
-
-
- 69 replies
- 145.6k views
- 1 follower
-
-
I have a AE95R and am in the habit of driving some pretty hot places, last new years I hit 55c ambient conditions,so i want as large a radiator as i can fit.I read that one can fit a earlier model hiace radiator. Having asked around and the general opinion was a higher capacity racing radiator,aluminium,would be the go,well I am in sydney, if anyone has one that will fit or knows of a hiace model radiator that would fit I will buy a new one of those instead. Any help appreciated. This to fit a standard ae95r 4wd wagon manual with no mods. Many thanks in advance!
-
- 6 replies
- 5.7k views
- 1 follower
-
-
Hi all, I've just bought myself an AE95 4WD Wagon which has just had a head gasket, water pump etc etc. but has a slight problem with the transmission. It's crunching into 2nd and 3rd which makes me assume its a synchro problem, but to talking to some of the other mechanics at my work, a couple of them have said that it is a design fault and that it can nt be fixed. I was wondering if anyone has the same problem and has fixed it? Also if anyone knows any good wreckers in the Sydney area? Just in case i need to replace the box. Thanks
-
- 11 replies
- 30.5k views
- 1 follower
-
-
Hi, guys I have just recently aquired a 4WD Wagon, my plans for this are to take it out bush, for camping and shooting I would like to raise it a few inches for more ground clearence. Can anyone suggest springs I can use and anything else I would need to do to give it some hight.. Cheers, C.
-
- 29 replies
- 94.4k views
-
-
i have a 1986 corolla ae80 hatch 1.3litre. wondering if a ae86 front bumoer will fit?
-
- 2 replies
- 17.7k views
-