AExx Corolla Discussion
1398 topics in this forum
-
-
G'day, its probs a stupid question, but i don't understand how the lock spacer works, cheers glen haha
-
- 3 replies
- 6.3k views
-
-
I have done a quick search on here and a an hour or so on google to no avail. I have a 2AC engine and the alternator has died, I've been trying to find the right alternator for the engine but can't find it anywhere. What is the difference between the 2A-C, 4A-C and the 4A-GE alternator, are they all the same?
-
- 2 replies
- 3k views
-
-
Hey guys, I'm new at this, so I hope I'm doing it right. I have recently discovered that a small about of liquid is leaking from the head gasket so I want to replace it (and get the head machined, and new bolts obviously). What I'm having trouble with is deciding what type of gasket to get? Should I go a multi layer metal gasket? Also just wondering about torque for the bolts... Hope some one can help. Jabs
-
- 2 replies
- 5.7k views
-
-
Hey guys, my '90 AE92 seems to be burning oil, it's not really noticeable unless it's over about 5000rpm, but I know it is slowly burning oil especially when I'm on the motorways, it's not too bad at the moment, but I have to make sure I keep topping it up every few months, which is not ideal. I'm guessing the head gasket maybe a bit faulty as well as the valve guides being worn and/or piston rings failing, etc. Would it make sense to purchase a VRS and change these parts out? How difficult would it be to do? My dad's telling me not to do it and that I'll screw something up. Can't really find a Youtube video on how to do it for a Corolla of this model (4A-FC/FE) whic…
-
-
- 10 replies
- 6.2k views
-
-
Hey guys, Just wondering if anyone has or knows of where I can get a centre cap for a 14" mag wheel with 8 spokes that belongs to an AE101R Corolla? I have searched eBay and Googled to try and find one but have come up with no exact matches. The front or face of the centre cap is approx. 55-56mm in diameter and the rear or clip side is approx. 51-52mm in diameter. It does have a Toyota logo on the face of the centre cap and the genuine part number on the rear is 42624-05010. I can supply photographs if required. The centre cap is grey/silver, not chrome (which is all I seem to be finding online). If anyone has information of where I could get one or even a…
-
- 1 reply
- 7.3k views
-
-
hay guys I'm having problems finding out the specifics to order my clutch. this is because Ive bought a 20v. with no gearbox which means no clutch no flywheel. to know what size i need. I'm putting the engine into my current 4afe 101. from what info Ive gotten I'm currently running a 215 mm clutch. I'm going to keep my current c50 gearbox till i get extra cash to waste on the gearbox. what Ive been told by auto barn their provider. said the silver top comes in 200 and 215 and i got no idea which one i need. maybe when they look it doesnt say silver top just says 20v. which means if I'm right 1 size is for the black top and the other is for the silver top could…
-
- 5 replies
- 4.9k views
-
-
i have a 95 ae101 1.6l auto and am considering an auto to manual conversion. i guess the best option is to get a donor car, but am curious to know if there are any newer or older models that can do the job. gear selector and pedal box being the big ones. the car(ex. grandmother) has only about 120k, so has a bit of life left to justify the conversion cheers eric
-
- 1 reply
- 3.4k views
-
-
Hi all, again.. just bought a AE71 wagon, diff is making a very loud winding noise at high ish speed, starts about 60, bloke i bought it off said you can adjust them, stripped it all down, and basicly the crown wheel is too far away from the pinion, so in effect the diff needs to be moved sideways, ive played with diffs before and used shims etc to cure this, so the gears match evenly, but I'm new to the toyotas...mine has 2 think spacers each side, my question is can you get shims for these? id say it needs to me moved about 2-3 mill one way, oh and the problem only occured because the chap who had it changed the prob and box to a AE86 one, he said there slightly differ…
-
- 2 replies
- 3.5k views
-
-
Will the ae92 passenger mirror fit on to an ae90? I need to know as I will need to replace my passenger side mirror as some idiot side swiped my car and cracked my mirror. Any replys are greatly appreciated.
-
- 2 replies
- 2.6k views
-
-
Will This fit? Hi all, trying to find a cheap ish boss to fit my ae71, just bought the car and a omp corsia wheel, but need a boss. if any of you guys could point me in the right direction would be great, just stuggling to find a cheap ish one directly listed for a AE71 Thanks
-
- 3 replies
- 4.5k views
-
-
hey guys I'm having trouble sourcing a 4ac starter motor.would i be able to use a 4ag item?
-
- 3 replies
- 3.6k views
-
-
i got new front tires for my ke20. need them all whitwalled again. as i bought it with whitewalls i didnt need to get them done. so i need help to find a place in brisbane 2 get my whitewalls re done? can anyone help please?
-
- 0 replies
- 1.5k views
-
-
Ok so I'm running xt 130 struts, ae92 koni yellow inserts and ae71 Strut tops. Problem is finding some springs to go with it all, I've read the posts on here but all mention inserts or coilovers. I just need some spring and don't really wanna go custom or adjustable coils, just set and forget, it's only a daily with no track work. Any help??
-
- 3 replies
- 7.5k views
-
-
hi all, i have a 1.6 ae101 auto, and the problem is it shifts into second way too soon after take off. if you flatten it, it will hold, but in traffic it changes so fast, your left with no power to accelerate as the rpm is too low, once again unless you floor it to kick down. could this be some sort of adjustment problem, or is it a computer mapping issue? appreciate any help cheers eric
-
- 3 replies
- 3.9k views
-
-
hi all, i have an ae82 with a 4a engine. the 5sp gearbox is stuffed, so wondering if other year/engine models will fit. there are a few for sale on ebay for diferent models, and they look almost identical cheers eric
-
- 3 replies
- 2.9k views
-
-
i'm trying to trace an obscure fault with the ABS on an import AE111. does anyone have a link to a factory or similar manual that might cover this??. plenty of Google searching has found zip. any leads appreicated
-
- 1 reply
- 29.3k views
-
-
Hey guys, i have a ae71 spirit, which is in need of help from bad rust damage. i have uploaded some photo's of the rust. i roughly think i have an idea of what i am doing. i was planning on shaping the aluminium plate and using that as a base, to support the filler and help give it more strength. in need of some ideas, please feel free to helpcheers current Materials: Paint Stripper Sand Paper Body Filler 2mm Aluminium mesh/plate angle Grinder Drill(wire brushes) Files
-
-
- 24 replies
- 25.5k views
-
-
Hey, I am currently undergoing a project to get a 4age into an AE71 hightop wagon. The car is completely stock except for some ma61 wheels. This is my first project and i am learning bit by bit how these cars work! Anyway, i have come to a problem in working out the best way to supply the fuel to the engine. Firstly, i know that i need a low pressure-high volume pump from the fuel tank which goes to the surge tank and then to a high volume-low pressure pump which pushes it to the motor. Now, most people have put the pumps and surge tanks in the boot or somewhere hidden, but in wagon where is the best place to put the two pumps and the surge tank so it isn't sitting i…
-
-
- 3 replies
- 15.5k views
-
-
Ok so I'm having a fair amount of trouble with the timing of my 4age. It's a bigport (out of a jap 86 apparantly) gone into my adm 86. So, I've spent hours going through old articles on the forums about timing, but I'm still not getting it right. I turn the engine to TDC (0 degrees on the timing marks above the crank pulley) The crank mark lines up, the cam gear marks line up, and the mark on the cam shaft under the oil cap hole is there too. I line the dizzy marks up and put it in. I bridge T and E1 on the ecu as I can't find the diagnostics plug in my loom. I then get the timing to 10 degrees at idle (800rpm ish, when warm) Sounds like I'm doing everything ri…
-
- 6 replies
- 23.9k views
-
-
Would anyone be able to tell me how to get to the fuel filter in my AE93 seca, and a rough guide on how to change it. I suspect my car is running a bit rich so i'm hoping a new fuel filter will help a bit in that regard.
-
- 12 replies
- 12.1k views
-
-
Hi guys Can anyone help please? I've just had to rebuild my dizzy to replace the seal inside it. Now I've got it back together and in the vehicle but it won't rev now. (I did mark the dizzy etc before removing it and have got it back in the exact same position.) It will idle, but only just (450-500rpm). As soon as I touch the throttle it dies. I could only guess the air gap for the pick ups in the dizzy (somewhere about 18-20thou at a guess), So have I got them wrong? Or is there another issue? Does anyone know the air gap for the pick ups? Cheers edit: Sorry, I should've mentioned it is in a AE92 FX-GT Corolla
-
- 6 replies
- 5.1k views
-
-
Hey need to replace my diff in my ae86 Will a ke70 or ae71 complete diff bolt in or Will the centre bolt straight in cheers
-
- 5 replies
- 10.7k views
-
-
Hello Forum :happy: I have recently become a member of this wonderful club as i am very interested in Toyota's and especially corolla's. And was wondering what the price for a Toyota Seca SX AE93, year: 1990's. I was also wondering about its spec's and worthiness as a car lol :) .. like is it fast or like reliable ect. Cheers! :)
-
- 2 replies
- 14.9k views
-
-
my ae71/4ac suddenly over-heated the other day,i'm not sure why.it ran fine at normal temp till i dropped a mate off,got about 1k up the road and the temp was off the clock!please help.:bash:
-
-
- 9 replies
- 14.5k views
-
-
so theres this missing pipe that goes from the start of the air intake housing to somewhere just behind/near the throttle body... it's obviously been broken off as there are two peices left on the ends where it would normally connect to it's some sort of meshy pipe coated in aluminium or metal shielding my question is what's the purpose of this pipe and where can i get another? cheers buds p.s. it's the sohc 1.6l
-
- 7 replies
- 9.7k views
-
-
need to know if can buy some sort cage close to ke20 shape. ( even if i need to cut and shut 2 fit). or just build one? what be cheaper?
-
- 3 replies
- 11.7k views
-
-
Hi all. Went around looking for some parts today for my AE82 twin cam hatch... Bloody hard to get here and anyone who does have parts wants to charge like a wounded ox. So one bloke would only sell me a complete AE82 twin cam seca (for $400... not bad but i have 4 cars at home and mrs would kill me if i brought another home... but i really wanted too, i love the seca shape but can't part with my hatch). Anyway i couldnt buy the car and he wouldnt let me strip it. I did notice that on the front of the engine under the throttle body was a badge that had "4AGE m/t"... Checked mine and it just says "4AGE"... Any special differences and any reason why i should buy …
-
- 4 replies
- 4.9k views
-
-
Hi all just wondering if anyone knows exactly what model in Australia and overseas this badge came on? I got this one from my local wreckers along with a brand new grille still in its plastic bag! :dance: i separated the front and gave it a clean and a shine at work (on the dental lathe, gotta use it for something good!) I also found it on this car when i googled ae71 sprinter, Also would love some of those bumpers too, point me the direction! so any help would be great!
-
- 0 replies
- 2.5k views
-
-
hey guys, recently bough a ae71 but crashed it so needs new: dif, rear axles, lower control arm, tyre rod ends and struts but was thinking may aswell upgrade while i do it. anyone know anything i can do upgrades wise?? much appreciated
-
- 12 replies
- 4.9k views
-
-
how do i find out where number 1 is when changing dizzy
-
- 1 reply
- 2.5k views
-
-
I have had a quick look around but havent really found anything so.. Does anyone know of a short stroke insert out of another car that will fit the 86 and xt130 strut? I know the st185 and sw20 are shorter but i need short short. Like short enough to keep cut springs captive with the tire slightly tucking the guard on 13" wheels. And before someone says it, coilovers arent an option. Cheers
-
- 20 replies
- 100.5k views
-
-
Alright, found a few sets of rims I'm interested in but need some advice on sizes for AE92 Firstly the set i liked the most are most likely not going to fit, but anyway, they are a 15x8 +25. So quite an aggressive stance, which I'm happy with, but the 8" width I'm thinking will pose a concern, smallest i could get would be a 215x50x15 that would be reasonable to have fitted. I didnt have my car at the time so i didnt get a chance to test fit these. Has anyone something of this size with any luck. I'm thinking the 215 will be too wide. My car isnt crazy low and should clear the guard fine, otherwise some flaring is no issue. I don't want to run spacers either. Anyon…
-
- 11 replies
- 5.4k views
-
-
I have the AE92 4AFC seca carby. I blew up my clutch completely the other day. I was wondering if there was a cheap stage 1 sports clutch that would suit this car. If so where would i find one?
-
-
- 26 replies
- 34k views
-
-
So I just picked up an 86 SR5 (4A-C) and a buddy and me pulled out all the emissions systems and plugged vacuum lines etc, we followed the 84hachi youtube videos and read every guide we could. it runs amazing EXCEPT for now it won't idle and sometimes it wants to rev on its own. We can't figure out why and its driving us nuts. all the vacuum lines are plugged except the distributor line and all that, and my friend things the carb bowl is filling with fuel, he says he thinks it wants to spray fuel in there like crazy if we mess with the choke. Anyone have this experience or know how we can fix this? Any help would be incredible, thanks! -Tanner-
-
- 11 replies
- 39.3k views
-
-
Hi all, i currently have an ae71 project that I'm working on while i have no license. i have no idea when it comes to brakes and being my first project and not being exactly wealthy i was wondering if someone could point me in the rite direction as to what i may need to replace before i go taking it into a workshop and have them charge me to tell me. basically i fill the fluid up to max and the pedal feel is quite spungy and gradually just sinks into the floor. i pump it a few times to get the feel back then straight back to kicking a whole in the firewall. after a while the fluid resevoir (how ever thats spelt) is empty again and I'm back in the same situation. if someon…
-
- 4 replies
- 3.9k views
-
-
I was thinking of droping anthor motor in my ae92 right now its got a 1.6 carby motor wanting to upgrade for something with fuel injection that goes quicker
-
- 15 replies
- 11.8k views
-
-
Working to replace head gasket on 1991 Rolla 4afe ae92 engine with carby. Removing rusty nuts connecting exhaust pipe to manifold. Penetrating oil was working; nut 75% off, but is now rounded and socket won't grip. Space restricted and too far in for vise-type grips (sorry, we're Yanks and forgot the proper Australian word for these). Any suggestions for removing the nut, preferably without damaging the bolt, using tools available in the Sydney area? Thanks, James & Kimby
-
- 26 replies
- 51.4k views
-
-
Hey guys, have recently purchased a ae71 rolla. looking at redoing the springs. just wonderin if anyone knew the best ones for stiffness. i got told you can use ford springs but havent seen it done. any help would be appreciated.
-
- 1 reply
- 3.2k views
-
-
My mates just given me the idea of putting a tercel driveline into my corolla and I'm thinking well all wheel drive could be abit of fun. Have learnt that the tercel shares many parts with the corolla and is quite possibly a simple bolt in job. Just looking for abit of info and advice and whatnot from other forum members.
-
-
- 28 replies
- 107k views
-