AExx Corolla Discussion
1398 topics in this forum
-
So I'm sorely tempted to buy an '87 twin cam (4AGE 16V). I am, so far, working off limited details. I'll be test driving the car and looking at the service history on the weekend. So far I know that it has a few holes in the exhaust, so this will probably need replacing. It has approximately 240,000km on the odometer, if my memory serves me correctly. It has bucket seats and a racing steering wheel installed (kinda tacky). What sort of price do you think you might pay for this? I ask here because I'd prefer not to get ripped off, but I have no knowledge of the value of these cars. In case you are curious, the owner is asking $2500.
-
-
- 9 replies
- 9.6k views
- 1 follower
-
-
Hey everyone, not entirely too sure where to post this, hope this is an appropriate part of the forum. I love cars, but unfortunately I know almost nothing about working on them, I've only ever done basic oil and filter changes, and recently got a friendly mechanic to help me/teach me how to install my coilovers on my skyline. I'm planning on getting a corolla of sorts - I'm considering anything from the AE80 Hatchback, AE90 sedans or "seca" models, and AE100 sedans. The plan is to stick something like the 4AGE in and just do as much as possible and learn in the process. I'm not really aiming for a super performance car, just want to build a fun and somewhat …
-
-
- 18 replies
- 11.4k views
- 1 follower
-
-
Hi viewers, I got a question about the headlights on my 82. It started as a random, once in a blue moon thing, but is becoming more frequent. When I turn the high beam on, everything goes dark. No headlights or high beam at all (parkers stay on). If I flick the high beam off, then on again they'll work fine. The last couple of nights I've also noticed the high beam flash on while the stalk is in the low beam position. I'm thinking, replace the indicator/light stalk combo (although it feels great, it's not loose or damaged). Unless someone knows something else might be the problem?.
-
- 4 replies
- 8.3k views
-
-
Can some one measure the length of the push rod between the slave and the clutch fork on an AE71? I bought a new one as I didn't have one with the manual conversion I bought. Thanks
-
- 4 replies
- 7.5k views
-
-
Hi all, I know its been done to death but I want to know what ratio to go for 3.89 or 4.11? I'm having a custom diff made which is a combination of...wait for it! A commodore/r31 centre housing (due to diff gears), ke70 axle housings, ef/el falcon lsd centre, r31 crown and pinion ratio's, ef/el axles shortened and re-splined and ef/el brakes (5 stud). I'm going to be running a 4agze, jdm big port rwd inlet, sc14, T50 (till it lets me know I shouldn't be) and some other goodies! I want good highway cruise rpm (so not screaming its guts out) but also want good acceleration, in saying that I don't want 1st gear to be rendered useless cos its too short, so I u…
-
- 10 replies
- 16.1k views
-
-
Hello! Pretty sexy radiator has popped up on ebay and since I am in need of one I am considering making a purchase. it is listed as an AE86 one and the seller is not sure if it will fit an AE71 Linkies to ebay item Anyone know if i am in luck?
-
- 5 replies
- 16.5k views
-
-
Hey I'm in need of some advice. I have just swaped the engine and gearbox in my 1990 AE92 (4AFC came out and second-hand 4AFC went in). The donor engine ran geat before I took it out of its rusted out shell. Everything is hooked up and it started first pop, however it will not idle unless the choke is on, as soon as you pump the throttle once it stalls. I have taken it for a test drive and it is way down on power and feels like the timing is out but I can't adjust the timing when it isn't idling. I tried fiddling with the idle adjustments on the carby but it doesn't seem to make a difference other than to increase the rpm when the choke is on. I'm pretty sure all…
-
- 1 reply
- 2.4k views
-
-
Hi, I have the Ae86 bc coilovers (these http://www.ebay.com.au/itm/BC-Racing-Coilovers-suit-TOYOTA-SPRINTER-AE86-/200751998308?pt=AU_Car_Parts_Accessories&hash=item2ebdc06564#ht_2352wt_883) I'm wondering if I need the roll centre adjusters I bought from T3? as the coilovers are the base adjustable type and I'm thinking if i set them at the lowest legal height I won't need the RCA's? Am I correct in thinking this? Also the T3 RCA's don't fit onto the BC coilover spindles as the RCA's are designed off the original ae86 mount and apparently the BC's are a "generic" spindle so i suppose it could be the same as silvia's etc. If I do need to use them i either n…
-
- 4 replies
- 6.8k views
-
-
Hi all, Just wondering how important the rear water housing is to have on the back of the head (see the link)? its got 2 sensors in it and out let etc. the motor I have doesn't have one on it and I was wondering if I could just blank it off and have the sensors elsewhere? The wreckers have one but they said the bolts felt like they were going to snap when trying to remove it. Any help or ideas are appreciated! :thumbsup: http://www.toymods.org.au/forums/parts-wanted/51963-flat-type-rear-water-outlet-4age.html Thanks
-
- 0 replies
- 2.8k views
-
-
I have been looking high & low for a front bumper. Anyone have one or know where I might find one. Thanks
-
- 3 replies
- 2.9k views
-
-
So a month ago i had a new clutch installed into my AE92 corolla. The car has been running fine since then but it has always 'stuck' in third gear when i tried to shift gears (it wouldn't come out unless force was applied or several light attempts). This didn't bother me too much but today it started making a whining noise while driving in third gear so I avoided third gear to save myself from that problem. Me being me, instead of not driving for the weekend and taking it to my mechanic on monday, i have been driving around all night and now every gear makes the same noise and its starting to get real rough changing gears. it is a struggle to get into reverse and 1st …
-
- 3 replies
- 5.9k views
-
-
Does anyone know of any mechanics that have put a 4agze gearbox in a ae82 in Sydney? As I'm having difficulty to find someone to fit my box in???
-
- 0 replies
- 1.6k views
-
-
can anyone tell me if this is an LSD just by looking at it? pretty sure its an s series as the carrier has 8 bolt holes. I've done a burnout with this diff and it span one wheel all the way to third.. when jacked up only the wheel that is being spun will turn, the opposite side stays still.
-
-
- 11 replies
- 5.5k views
-
-
I am having some drama with my AE82 hatch. It is a 1.6L Manual (4A-C) and I and my mates can't work it out. There is a miss in number 3 so I swapped leads with a good set off my wreck, running on 2 to 3 cyl now. If I take to number 3 lead off, nothing. Put it back on, nothing, but hold it 3/4 inch away from the plug you can hear it arking and it fires on all 4... Any ideas ?
-
- 6 replies
- 5.9k views
-
-
Hey guys. I have done a search and nothing has come up or not really answered my question. I just picked up a AE82 Corolla Seca and the suspension is really sloppy. I wanna make this a hill climb warrior as its already had a 20V Conversion (Got for $300 to so really happy with it lol) Just need to know if i start getting prices on suspension for any AE model will the suspension be the same e.g I used to have an AE86 and i sitll have parts around the house. Thanks.
-
- 5 replies
- 9k views
-
-
hey guys looking for rims for my rolls and wondering what size is the largest and what width is the largest also I'm a but new so what is an offset and the benefits of one?
-
- 6 replies
- 30k views
-
-
Hi, I have a problem with my 95 corolla. The first problem is that it's smelling fuel from the oil when I'm checking the oil level. And also it's coming too much unburned fuel from the exsost, when I'm giving just a little throttle, and let the gas pedal go back, then the exsost start peeing, it's not like a few drops, it's alot, why? the exsost is ''peeing'' in almost 2 seconds, then it stops.... Benny
-
-
- 10 replies
- 5.4k views
-
-
WE HAVE A 4AGE ADJUSTABLE CAM WHEELS TWIN 40MM DELORTTO CARDS ,AND WANT TO RUN AN IGNITION IGNITER AND MODULE SEPARATE TO THE CUMPUTER WHICH PREVIOUSLY RAN THE FUEL INJECTION, CAN ANYONE RECCOMEND PARTS REQUIRED AND PREFERRED BRAND
-
- 2 replies
- 2.7k views
-
-
hey guys looking for suspension upgrade and thinking either kyb shocks and king springs or coil overs? any decent brands? and what are the price ranges for coil overs i have an 89 corolla
-
-
- 17 replies
- 13.9k views
-
-
Hey RC! So this afternoon I tried to start my recently acquired AE82 4AGE bigport, it started fine but after about a minute of the engine running the starter motor re-engaged the ring gear and I had to turn the engine off. I then tried to start the engine again and the starter motor was engaging and cranking the engine when the key was turned to the 'ON' position instead of the 'START' position, and the engine would not start. So I tried turning the key one notch further to the 'START' position and the starter motor stopped. I tried this numerous times with varying results, occasionally the starter would not crank when the key was in either position, and occasionally …
-
-
- 4 replies
- 12.5k views
-
-
I have an AE80 hatch that is well, showing signs of wear. It is blowing smoke and I think it is the valve stem seals and if it is not I'm going to change the motor, I'm not after performance I just want a newer motor I can get from a wreck rather than buy an old 4AGE have power I'm not going to use, having to upgrade the brakes and struts on the rear. I could have a motor lined up for 650 with 45,000 km on the clock, it's either 1.3 or 1.5 have to double check and I think it would suit what I am looking for quite nicely. The orientation looks the same. I'm wondering what the issues from changing the side of the exhaust to front and then running it under the car is going t…
-
- 3 replies
- 3.4k views
-
-
where can i get a mild cam,inlet manifold for a 32/36 weber and extractors for an AE71 4ac,relatively cheap?
-
- 8 replies
- 17.4k views
-
-
Today i went about to replace my alternator. I have removed the old one out and put the new one in, but now i can't figure out the tension and locking screw? I can't figure out how the tension screw is meant to work? And now... Iv snapped the bloody thing! The bolt is a rectangular shape with 2 holes (I'm guessing one for fixing screw, one for tension screw). Pics attached if that helps! If anyone can help me figure this bloody thing out, it would be much appreciated!
-
- 0 replies
- 4.4k views
-
-
-
My AE80 and 82 have sh1t headlights, yellow as anything. Volts getting to them seem fine, battery is on its way to lead acid heaven though. does this look too good to be true http://www.narva.com.au/pressreleases/asset_id/84/cid/1/parent/0/t/pressreleases/title/worlds-first-plus-100-globe-now-available-in-australasia If no one knows, dunno just don't want to blow money chasing good after bad. Thanks for reading
-
- 2 replies
- 2.8k views
-
-
Hi good people , i've just come across this awesome forum and decided to join , as of yesterday i became the owner of my first rolla , it's only a ae94 , but it's a start. Paid $150 for it with 6 months rego (revs checked of course).... the catch? well the back yard machenic tried to fix a blown head gasket , by pulling the head off , putting a new gasket on...and bolting the head straight back on.. no checking for warps , cracks... no machining...no cleaning the radiator.... anyhow , they stuffed the timing up and bent the valves...and thats as far as i got...lol so i picked up a replacement motor today (4afe) from the wreckers for $500. with 3 months warrant…
-
- 0 replies
- 2.2k views
-
-
has any one fitted a bigport 4age head on a smallport 4agze bottom end?
-
- 1 reply
- 3.3k views
-
-
any 1 selling or no some 1 seeling a sx seca wing of a ae92
-
- 0 replies
- 2.5k views
-
-
Hi all, Total newbie to this model car. Just bought one for the wife and we want to know if power steering can be fitted to this model and what bits we would need (preferably with part numbers or a link to the available part numbers). She loves the car, just hates the steering. Awesome forum by the way.
-
- 1 reply
- 2.6k views
-
-
I recently had the clutch replaced on my Ae93 SX with the C52 gearbox. I took the car for a quick spin after the clutch replacement, and heard a rattle/clunk when I hit about 35kmh, which increased in intensity as I increased speed. I didn't exceed 45kmh during the test drive. Pulled back into my garage, jacked up the front of the car, fired it up, put it into 2nd and clutched out, only to hear that rattle/clunk again. When i put the clutch back in then noise stopped. Also, with the car off, and turning the RHS front wheel by hand, a clunk/rattle can be heard, with clutch in or out, while in neutral. The LHS didn't make any such noise. I have been suggested to…
-
- 0 replies
- 3k views
-
-
is there a twin cam head that would fit a rwd 4ac?don't wanna go the 4age route,been done to death.was thinking 4afc or 2tg.is it even possible?:hmm: I wanna stay carbed so should i go for an 18rg or 3tg?
-
- 0 replies
- 2.5k views
-
-
hello everyone, i am new to rolla club and i have just recently bought an auto 1984 ae71. as i accelerate moderately to hard the car suddenly shutters, i believe it may be doing this from 1st to 2nd gear. so the transmission must have a problem, thanks, Aaron
-
- 5 replies
- 3.3k views
-
-
please watch the vid if you havent already and share it on face book or what ever he needs to be publisized http://www.youtube.com/watch?v=Y4MnpzG5Sqc >|
-
-
- 12 replies
- 10.4k views
-
-
i want to get a gt katch spoiler for my ae92 corolla i noticed carmate.com.au has them but $240 odd dollars is a fair bit anywhere else that sell's the for a cheaper price?
-
- 1 reply
- 3.8k views
-
-
Hi I got an AE82 for my daughter 2 years ago. 4AC, a tough and good handling little car. 300,000 km, sat in a paddok 2 years and out front here for one; then pretty easy through rego and to get going reliably. I want to check the gearbox oil level. I found what looks like a filler on top of the gearbox tunnel to the left of the battery. Smells like hyppoid 90. I can't see any oil! Plug has a stepped probe that may be a stunted dipstick? How can I tell if it has enough oil? Can someone tell me that from a manual? As I don't want to overfill and stuff the seals. ls correct spec oil hypoid 80-90? Thanks. Cheers, Brett
-
- 2 replies
- 4.7k views
- 1 follower
-
-
whats the best size wheels that will fit without flared guards? on a ae71?
-
- 14 replies
- 5.4k views
-
-
just needing new taillights, and wondering if these would fit an 1984 ae71? http://www.facebook.com/photo.php?fbid=100221786711766&set=a.100221530045125.186.100001718340548&type=1&theater
-
- 11 replies
- 3.3k views
-
-
i want to front end convert my corolla from this standard front to the seca model ive had a look it look's like it would work body lines and sutch all line up it would mean from what i can see new guards, bonnet, lights and indicator and grill but would it look alright? :hmm:
-
- 14 replies
- 13.2k views
-
-
Hi all, has any one seen this spoiler before? looks fair good IMO, just wondering if it was only on US models? http://www.youtube.com/watch?v=5dSBypokMps&feature=related
-
- 0 replies
- 2.2k views
-
-
Hi all as the title indicates, I'm wondering if it is possible to get head light protectors for AE71 lights? I want that extra granny spec detail as i have already got the rear louvre! Any advice on where to get them or if anyone has some in fair good condition and want to sell let me know! thanks Jason
-
- 3 replies
- 3.7k views
-