Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by 4ke70,

    Hey just wondering what the two plastic bits would be worth that are behing the rear window or if its windowless bit those black plAstic bits if there worth anything cheers

    • 0 replies
    • 4.4k views
  2. Started by oldie,

    Can anyone tell me if there is any difference between the manual and auto radiator for a ae82 4 door sedan regards size etc.,I know about the outlets on the bottom of the tank for trans cooling bit I really need to know about physical size.Thanks,Pete.

    • 3 replies
    • 6.6k views
  3. Started by Dan.,

    My 1984 corolla fx-sr is having some problems :(, it won't rev. Please watch the video so you can see how it is acting. Any help and advice is appreciated. Dan

    • 0 replies
    • 5.7k views
  4. Started by Rollz94,

    Hello everyone. I'm on the hunt for a ae71, I have found one in Adelaide however it has a rb30 in it. Does anyone know if the engine mount points on the shell would have been modified to fit the 31 cross member...? Reason for this question is I want to put a 20v 4age in its place. Sorry if this is in the wrong place. Thanks.

    • 9 replies
    • 9.6k views
  5. Started by ericcs,

    are the ae92 manual gearboxes on the back of 4a-e engines the same for the ae101 with either the 4 or 7a-fe engine, as i have a manual ae92 and a auto ae101 and want to put the manual in the auto? also, are the pedal box, gear shifter and drive shafts interchangeable thanks eric

    • 0 replies
    • 7.2k views
  6. hi guys , i have a MANUAL 5SPEED 1990 sx seca 1.6 AE 93 4A-GE with axle-642 trans C52 tires are 185/60R14, My issue is that the motor is revving at 3400 while at 100kph, sounds like it is way too high. i have a mate with a 4door hatch corolla with the same engine and axle /trans codes but with 195/50R15 tires and his car rus 3000RPM at 100kph i have made a comparison of the two tire sizes on a tire calculator and there is a minute difference in tire diameter so the revs should be the same. when i bought the car the guy said it was not the original motor, but it is a 4A-GE engine however he did not mention the gearbox does anybody have an idea what might be g…

    • 9 replies
    • 8.3k views
  7. Started by NEO_E70,

    Hey guys, Recently the clutch in my AE71 seems to have given in. Fully depressing the pedal seems to have no effect, unable to put into any gear. Prior to this initiating reverse would give a crunch more often than not which didn't happen at all previously. Fluid levels are within operating ranges. Not sure if worth mentioning but there is a wet patch below my transmission drain plug. Doesn't appear to be any leaks to clutch assembly. Needing advice on where to start before taking it off to my mechanic to have things checked. 84 AE71 4AC [T50 trans] 90% stock

    • 8 replies
    • 12.2k views
  8. CAN ANYONE LINK ME TO A DOWNLOADABLE 4AGE SMALLPORT WORKSHOP REPAIR MANUAL PDF. Ive been searching the interweb for over an hour and my boss is starting to get annoyed Thanks in advanced

  9. Started by Twincam16seca,

    Hi all, My indicators are flashing at irregular speeds intermittently mainly when signaling left. Occasionally it does it when turning right, it will be flashing at a normal speed then speed up, i have noticed it changes only some times when turning right and other times it changes speed without turning the wheel. Just wondering if its my flasher unit or wiring gremlins? :hmm: When the hazard lights are on they both flash at the correct speed and the globes are fine as far as I'm aware, as i have replaced one already! thanks for the help!

    • 5 replies
    • 11.5k views
  10. Started by mike100,

    got my cuscos in an wheel aligned sticks to road like go kart.

    • 2 replies
    • 5.6k views
  11. Started by mike100,

    any one know of a workshop in melbourne who can PROPERLY tune a 4age 20v bt with adjustaable cam pulleys, i have a iiregular miss at about 3000 rpm ,i think the timing is out .

    • 5 replies
    • 8.9k views
  12. Started by az93rnova,

    hey all, just wandering if anyone knows where i could get a water pump back housing for a 4ac ae71 corolla, repco, and the wreckers where i live don't have anything.

    • 3 replies
    • 6k views
  13. Started by Drift_Marti,

    I have searched but can not find the answers i need i have an ae82 twin cam corolla and my drivers seat has had it, I'm wondering what (in the toyota range) is an direct bolt in and is easy to find ? i only really need the drivers seat but if i could find a pair of seats and rears then I'm happy too grab them. I just need to know what will bolt in with no modification thanks Marti

    • 14 replies
    • 20.6k views
  14. Started by Boostn_24/7,

    Hey guys I thought I was reading somewhere where Ae92 Struts and Celica struts where interchangable? Celica struts where around the 40-60mm Shorter ?? I have looked around but can't seem to see where that was, or possibley I was dreaming... Can anyone shed some light on this for me ? I'm trying to run a shorter throw shock with my springs to get the low/stiffness I am chasing without going coilovers. I'll attach a pic of the car with my rims that I am trying to run, as an example of ride height etc. As you can see the rear is a little soft and has rims in the back seat so its sagging abit, but realistically, height is about what I want in the rear, as for the front, can p…

    • 3 replies
    • 16.8k views
  15. Started by Drift_Marti,

    I have just bought a set of ae82 struts(i have a twin cam ae82) the struts i got only have 3 bolts on the top hats, front have 3 only and rears only have 3.Where as my ae82 has 4 my question is the rear struts are fairly long, will they fit being 3 bolt 2nd question is can i used the strut tops of my ae82(4 stud) and swap them to the new struts with out any hassle thanks for your help Marti

    • 5 replies
    • 8.1k views
  16. Started by gt88,

    Hi, We have a 1997 Conquest. Occasionally when locking the doors with the remote, it beeps twice and does not lock. You then have to close the doors with the key. Upon locking it beeps again. When unlocking the car it can't be done with the remote, it must be done with the key. Following this issue, it causes another problem - you can turn the key in the ignition, not even to accessory. The steering wheel is not locked. You have to play with the key numerous times going back and forth until it finally opens up. As mentioned it happens only occasionally probably once a fornight. As the old lady drives the car I would like to get it fixed but have not idea where…

    • 0 replies
    • 3.5k views
  17. havent done the water pump job on this kind of engine b4, to make it harder, it of course has full accessories A/c and PS.. So far, have removed front engine mounting,jack under engine lifted up a bit, alternator belt,PS belt undone bolts on water pump pulley, removed top half of timing case... Am wondering couple of issues. 1. How is PS belt usually removed/replaced, I have removed the engine mount top bracket and PS pump top support and bracket, undone WP pulley bolts only, pulley is loose , the belt can be removed with the pulley having been removed first,but how is that PS belt usually loosened and tension adjusted? 2. A/C belt..necessary removal f…

  18. Started by Andy43,

    Hi All Need some advise please. Speedway Junior Sedan racing (Kids 10 to 16 yo) is undergoing a rule change. We are currently limited to cars that came out with 1200 cc engines. (ke30's) Over the next season or so, the rules are being amended to allow 1600 cc cars. The output of the engine will be restricted by use of a restrictor plate that will be mounted on the exhaust manifold. Diff front or rear must be locked. Suspension upgrades allowed will be springs and shocks noting that adjustable or competition type shocks will not be allowed. Thats about it for performance mods I'm told they basiclly want all cars to have simlar hp figures at the wheels so lig…

    • 9 replies
    • 10.3k views
  19. Started by BmstKe70,

    hey guys, i don't know what the shizz is going on, but when i drive the car for say around 10 to 15 minutes all will be fine! but as soon as i gets warm, ill sit at the lights for say 3 minutes, and then when i go to take off, it will either just splutter or try and stall, untill i take my foot back off the accelerator, it will return to its normal idle, and the same will happen if I'm just driving and i drop it back to 2nd and go to put my foot down, the motor will just cut out or try and splutter on me again, and its really really starting to annoy me... :( if anyone could help it would mean alot! p.s its a 84 Ae71 spirit! cheers guys :)

    • 4 replies
    • 7.9k views
  20. Started by Willacy70,

    Hi everyone, I'm planning on doing small service on my 4ac and i am just wondering which oil i should use? Thickness wise and type wise? the engine was rebuilt less than 10,000 Km's ago and this is the first time i will be changing the oil since buying the car. Your input is greatly appreciated.

    • 9 replies
    • 19.8k views
  21. Started by Loose,

    I'm putting some new shocks in the front of the 71 and I'm having a bit of trouble getting the struts out, I have removed the 3 little nuts on the top, and the 2 on the side of the bottom and the little one right on the bottom. The strut still won't pop out of the bottom, any help would be much appreciated!

    • 10 replies
    • 6.5k views
  22. Started by Addicted,

    I have bought and got running a Corolla AE80 2ac Automatic and combined driving it is giving me nearly 10/100 fuel wise, are these things that f*&king thirsty timing is on 0deg per bonnet sticker. drives smoothly with as much power as you could expect, running shell 98. It is not stop start capital city wise as I am bush but you do get 60km/h signs. Air filter is good, plugs replaced oil is decent not getting soot or crap through it. Trans isn't missing a beat. no a/c Any ideas. Please help

    • 16 replies
    • 13.2k views
  23. Hi all, Just wondering what brands of adjustable cam gears are "safe" enough to buy from ebay as i'm looking for some for my 4agze. So basically wondering if the cheap as ones like these ones http://www.ebay.com.au/itm/Adjustable-Toyota-Corolla-GTS-4AG-4AGE-85-91-Cam-Gear-Gears-Pulley-/271117640231?pt=AU_Car_Parts_Accessories&hash=item3f1fdee227&_uhb=1#ht_2935wt_1037 are just as good as the more expensive ones like these http://www.ebay.com.au/itm/TODA-RACING-Cam-Gear-Pulley-LEVIN-TRUENO-4AGE-16V-AE82-AE86-AE92-One-Pair-/321025211793?pt=AU_Car_Parts_Accessories&hash=item4abe97fd91&_uhb=1#ht_2314wt_919 let me know what you all have!

  24. Started by corys,

    Hi, I recently purchased an '89 SX hatch with 4AGE motor. The car needs a bit of TLC!! One problem is erratic idle. From cold the idle surges between 1500 and 2500 rpm. before slowing after a few minutes but still surging at lower revs. Any help with likely cause/fix would be greatly appreciated. Thanks in advance. Cheers, Dave

    • 3 replies
    • 4.7k views
  25. Started by bigadz101,

    does anyone know what timing belt a 4ac would take?

  26. Started by demps,

    Hey guys, I'm looking at buying what I think is a ce100, its a 1995 Japanese import, LX Limited and the fellas asking $200 for it, only catch is that it leaks all its brake fluid out the right rear drum. I figure the drum is possibly gonna need rebuilding or replacing, and probably the cylinder as well. What I'm wondering is how easy it is to source these parts and whether they're standard across the model range? As in will there be a difference between the Jap Diesel brake setup and an Australian petrol setup? Any help would be much appreciated fellas.

  27. Started by kampas,

    hey everyone i have a 1990 AE92 corolla with a 4age 16V smallport motor, on the air box it has a sensor called a Air control valve, i was wondering if anybody has any ideas on how to install a cold air intake and keep that sensor? is there an adapter you can get for it? or something like that.

    • 2 replies
    • 12.2k views
  28. Started by simon_w8,

    hi guys. i had a rollaclub account a few years back but have decided to gets back in the mix with some fellow corolla owners. don't have any pics to put up yet but my old profile ( oze_idiot ) has all the details about my car. trying to setup a facebook page for lovers of the AE112, but am a little busy atm with work and moving house. thats all for now, just a quick hi to evryone and hope to get back into the rollaclub universe

    • 0 replies
    • 3.1k views
  29. Started by StrollaMan92,

    Hi guys this is my first post so please don't roast me. This topic is probably already covered somewhere on here but I haven't got time to search through old threads to find the info i'm after. I recently bought an AE92 corolla but the gearbox is on the way out, conveniently enough I already own an AE86 corolla with a good box but shit body. The two boxes are still in the cars as the old car will still be used until it runs out of rego later this month but i'm wondering if the box in the older corolla will marry up to the newer model. Both are manual boxes and the only difference I can see so far is that the older box has got different ribbing on the outside of the cas…

  30. Started by Frammo,

    Hey all. Have been having an ongoing issue with my 4AC. Whats happening is when you come to a stop, 9 times out of 10 it will lose idle and stall. Many people have said that the carby needle was dirty so I went off and bought a much newer carby of a 4ac and it was cleaned out. It worked great for about a week and now I am having the same issue. A mate seems to think that the EGR valve is faulty? Any idea on how to diagnose a faulty EGR valve? Thanks

    • 5 replies
    • 6.3k views
  31. Started by SandyAE92,

    Any one selling headlights, bumper, and bonnet for a AE82? Needed ASAP.

  32. Good afternoon peoples. I am after a set of bigport cams for my smallport ae93. I was advised that I need to be carefull when buying bigport cams as there is 2 sizes. One size is same as stock smallport cams. 232 I think it is. Then there is the larger ones. 240 I think. Now I have found a set of bigports claimed to be out of a series 2. How do I know what cams are what size? Or am I miss informed and all bigport cams are the same? Also what are they worth? I've noticed a few people sold and are selling for $50 over a few forums does that sound about right. I have a few sets available to buy but no one can tell me what size they are. Cheers guys.…

  33. hey guys my ae82 4age thermo fans wont turn on till i unplug the switch on top of the thermostat,any help would be appriciated

    • 2 replies
    • 7.9k views
  34. Started by Kid-Ae,

    On either Wednesday or Thursday i'll be picking up my 4th Corolla (2nd registered one), a lovely Ae112 with the bug-eye front end. Now, I don't know if I want to go to the effort of it or not, but I have been playing with the idea of converting it to the re-modeled front end that these cars came out with (1999 onward). I understand that i'll need a new pair of lights, a new front bar and a new bonnet (along with the associated looms for the lights). My question is this. Will I need to change the front guards too? IF I decide to do this, I'll be collecting parts slowly, bit by bit and get them all sprayed and installed professionally, to avoid a poor quality fi…

  35. Started by Johno,

    Hey, the head gasket on my 4age blew. Going to get some head work done and looking to raise the compression ratio. I was going to get the head re faced and get a thinner gasket. Standard head gasket size is 1.2 - 1.4mm so i was going to get a 0.8mm head gasket. Problem is i can only find ones for 20v and not 16v. Are head gaskets for 20v interchangeable with 16v and are bigports and small port head gaskets interchangeable?

    • 5 replies
    • 16.6k views
  36. Started by It's_AUDM_Yo,

    Ola So I just got my car running as some may know. 4age 16v in KE70 The thing is its spitting out this black stuff (photo below). There is no smoke The engine has sat for 6+ months before I started it. I have no idea on the condition of the exhaust. I have a sneaking suspicion I put a but much oil in it. Yes I searched but I couldn't find anything that specific. So should I be worrying? What can I do to solve this? Cheers

    • 15 replies
    • 17.7k views
  37. Started by brods,

    So I'm thinking of taking off the stock muffler at the point where is bolts on then replacing it with a straight peice of exhaust. so my question is: Is there anything problems that would hurt the motor or the car? Edit: 4 AC, 5 speed manual

      • Upvote
    • 9 replies
    • 12.4k views
  38. While you are shifting up through the gears there is no problem or sound, but if take your foot off the throttle there is a grinding sound from the gearbox near the passenger footwell, I'm thinking it could be front diff problem, anyone else has encountered this problem? any help would be appreciated.

    • 2 replies
    • 3.4k views
  39. Started by alysa,

    I just bought this 91 CS Lim and trying to figure out how it has been modified. Does anyone know what the pipe I've marked with orange is? Help would be hugely appreciated.

      • Downvote
    • 6 replies
    • 7.3k views
  40. Started by gilly40k,

    I have a stock 4afe I want to get the ports done polished and bigger and over sized valves but I want to know will I need bigger injectors or any thing like that

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.