Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Hey guys my 4ac is blowing a bit and using a mother load of oil (4-5 litres a month). I'm pretty sure the rings may be the cause. Is it possible to easily change the rings by leaving it in the car and remover head and sump or is it going to be a engine out job? Any help would be great

    • 4 replies
    • 6.2k views
  2. Started by MA44AD,

    Hey This is my first time owning a rolla. I have previously owned Commodores so I have many parts lying around.. One thing I have noticed is my AE93 doesn't pull up too well, even with new rotors and pads, So what I was thinking was, why not retrofit a set of cheap VT calipers ($40 for the pair) and rotors to suit (get DBA to make me up a set of 4x100 rotors to fit).. By the looks of it, it seems like a cheap way to get some big twin piston brakes.. Has anyone ever looked into doing similar? Cheers Jack

  3. Hey guys, I have a 4age smallport AE92R with a blown head. I'd love to put a new smallport head on it, however my funds don't stretch far enough to fork out $400 for a new one, and all the U-Pull-it wreckers around here only seem to have bigport TVIS motors available. If I just get a bigport head/intake manifold do I also have to replace the ECU, Wiring loom, etc??? Or does anyone have any smallport heads they'd like to be rid of? Any help would be appreciated. Cheers, Josh

  4. Started by justin_es,

    Good day people's. In the photo's you will see that my intake pipe is stuffed. Big crack in it hence all the tape so NEEDS replacing. Now the very FEW stock intake pipes i have found to replace it with are quite pricey which i am not willing to pay. Anyways i just need to know what a certain hose and connection does so i know if i can disconnect it or not as my new hose wont have the connection available. (I also understand i will lose the resinator by replacing the standard pipe but my way of thinking is if i replace it with a high flow intake then the resinator becomes irellivent as there will be plenty of air available when the foot gets pushed to the floor. Co…

    • 0 replies
    • 4.4k views
  5. Started by frosty,

    Couldnt find an answer so .. Quick question as i need to hit wrecker this arvo. Starter motor for 4Age RWD ( converted ae82) with T50. Will a rwd 4AC starter motor fit this ^^ and work?? ( ... local guy has a 4AC AE71 in the yard) **edit ... big port / small port ... same starter ?? thanks

  6. Had a search and found a little about the bumper differences between Series 1 and Series 2 Corolla's, but haven't found much more. The car I've currently got is Jun 92 and according to the local Toyota parts interpreter there was a change sometime around mid 91, where the indicators get a different part number. The indicators for my model aren't available in australia and if they were they'd cost ~$160 each. Noice ! So that means we're back to looking at Taiwanese knock-off's or second hand units. So... do the earlier lights fit the later model ? What other differences in headlights and whatever are there ? The other corolla I had was mid 91 as well, so not real sure …

    • 8 replies
    • 28.5k views
  7. Started by Willis,

    Hey guys, wasn't quite sure where whether to post this in KE or AE discussion but heregoes. Motor - 20v 4AGE Car - KE70 I'm thinking of running a side pipe from my extractors to behind the left wheel somewhere but I'm not too sure if it's a good idea. Don't know much about exhausts other than the fact that I want the highest velocity possible haha. One thing I'm sketchy on is it being too short and risking burnt valves, I don't know if it would be something I'd need to worry about, actually having extractors and all but still, thought I'd ask. I'm mainly thinking of doing it to keep it easy. Nice and simple... Has anyone here run a side pipe f…

    • 41 replies
    • 58.9k views
  8. Started by gilly40k,

    I just put a 4afe engine in my corolla that replaced my 4afc the first week not one tick or clunk it was great but I loan it to a mate and now my injectors r clicking? R they ment to? And my camshafts r rattling the shims r in specs how ever I am getting a rattle drone them

    • 4 replies
    • 15.7k views
  9. Started by Willis,

    Hey guys, my blacktop is running a little funny. Had a massive flat spot around 2500/3000 rpm. Ran the diagnostic on it and it gave us the codes for speedo sensor and intake air temp. I haven't put much thought into the intake air temp, we fixed the speedo issue, set the timing on the relocated dizzy and it ran a whole lot better. Drives great but still not as good as it could be, still coughs and pops a little when you get up in the rev range. I was just wondering if the dizzy on the back of the head could be out aswell? Even though it's blanked off?And if it would make a difference? The car is drivable and makes usable power, it could just run a little better. Anyon…

    • 9 replies
    • 6.8k views
  10. Started by tomhanlin,

    Hey Guys, I know this may be a stupid question, but I'm curios as to whether the 4AFC and 4AFE are the same motor apart from one being EFI and the other Carby. If this is the case, does that mean that i can use a 4AFE rebuild kit on the 4AFC? I wanna keep my AE92 seca fairly standard but the km's are over 360,000km and i wanna have a spare rebuilt motor incase this one gives way. any extra info would be great :) Cheers

  11. can any one send me a how to not really sure where to begin not really experienced with this ive seen thins done on other cars and would really like to do it myself what parts do i need? all ive been told is that i need the hand brake cable, rear hubs, control arms and brake master booster from an AE101 bu not how to install them photos would help a lot. thanks :)

  12. Started by Myki91,

    Hey every one, just curious to know if ae101 or ae112 seats fit in a ae92 sedan?

    • 7 replies
    • 34.6k views
  13. Started by tomhanlin,

    Heys guys ive got a problem. Ive got an ae92 4afc seca. Last night i revved out first missed second and gave it full throttle not realising it revved off the tacho. It then proceeded to slowly die til idle. It idles fine but anything less than half throttle and it dies out or revs and miss fires. If there is full throttle it will missfire til 3500 then be fine. Anyone got any ideas. Ive been told so far it could be coil or carby.

    • 1 reply
    • 3.2k views
  14. Started by rke_011,

    Can anyone tell me where these plugs/wires belong on a 4age? I believe its an AE82 loom but could be wrong? Also, the motor is a 4A-GEU and looks like the Dizzy uses a different plug compared to the loom plug? Can these be matched to each other or are they not compatible? most wiring was simple but just a few things and I'm hoping you guys can help without me un wrapping all the loom.. Things that are not connected are MAP/AFM? Not sure what the loom is for? Dizzy TPS Coil/Ignitor TVIS (I think) Any help would be great.. Thanks in advance.

    • 11 replies
    • 40.9k views
  15. Started by Myki91,

    Hey guys does anyone knoe if the ae92 hatch or seca front and rear struts fit into the ae92 sedan?

    • 4 replies
    • 4.1k views
  16. Started by Addicted,

    Had a freaky thought tonight, has any one put an AE80/82 or other AE series on airbags. I'd love to drop my car on it's arse when it's parked and adjust ride and incase of defect raise it for defect clearance. If anyone can give me some ideas, info or places in NSW that do it please let me know

    • 3 replies
    • 4.9k views
  17. Started by Myki91,

    Hey do ae101 or ae112 front and rear seats fit in an ae92 sedan?

    • 0 replies
    • 3.5k views
  18. Started by 51MMO,

    ok I'm sure this has been asked a milion times but..... what do i need? is there a page already dedicated to this? thanks guys

    • 59 replies
    • 92.6k views
  19. Started by VBlue,

    The car didn't come installed with an A/C unit, I'm thinking of getting the full A/C system from a wreckers and putting it in. Partly because I don't have the money to buy another car at the moment, and I want to learn something along the way. How difficult is this to do? Time isn't too much of a problem, I'll be doing it over the summer. The heating system works, do I need to remove the existing heating system when I'm going to install the A/C unit? I'm also a little confused looking at the diagrams. It seems the condenser is where the car radiator usually is. Am I going to need to do some major moving around of parts to get this full unit in? This means, compre…

    • 3 replies
    • 6.3k views
  20. Started by BmstKe70,

    Just wondering can you change an ae71 flat front to slant front just by changing the panels ? Cheers

  21. Started by mjcypress,

    Hey forum... I'm a little new to the scene of "doing up" cars, particularly my AE82 corolla.. I was just wondering if there is any software out there that you can use to edit of modify cars, and I don't mean like a home brew application but if there is anything professional. any advice or help is greatly appreciated :)

    • 2 replies
    • 2.9k views
  22. MMM-kay my friends! I have a few issues to resolve on my AE82... 1st'ly carby, its acting like a vacuum leak, but I've been over it many times, rechecked manifold bolts, carby bolts etc, nothing is pointing out the obvious, only the "Gas filter" (I plug that into the system, cylinder 1 goes lean, and doesn't fire, it takes what to get it to fire, just..) choke is erratic, goes high/low when ever it feels like it, despite the fact its hosed up to spec in the maintenance manual. When I disable it and its impossible to start cold.. (if I can throw a manual choker on there, or rig up the old one with meccano pieces, or fit a 2/3/4K carby on it). Also, the anti-dieseling valve…

    • 6 replies
    • 41.8k views
  23. Started by rhysscott,

    hi all just a few questions as I'm not sure if I'm getting correct answers from people doing work so i running as title says 20v BT turbo in my rolla and so wondering should vvt be used or disabled when turbo? also got defect few weeks months ago and had to get emmissons test at botney so had to put in euro cat, how much power should one expect to lose compared to before when i had no cat? and lastly what sorta power is normal/expected for said engine all std running @ 11psi thx

  24. Started by Addicted,

    I have a 1985 AE80 Corolla with a 2AC engine and auto. It almost feels like kick down is engaged as it shifts late and won't go into drive until 70, with foot flat (kickdown) it is about 105 km/h. 1st to 2nd sometimes you need to lift the foot off at 50 km/h for it to change. Sometimes it is like driving a manual, but with out a clutch. I have checked the kick down cable and there is a few mm of play in it, fluid is just under where it should be by a bees dick, had it slightly overfull and no change. Trans has had new filter and new dexron III fluid put in. Every Trans place says oh we'll have to rip it apart so may as well rebuild. 1 grand thanks, All gears physically wo…

    • 1 reply
    • 2.1k views
  25. Started by Boostn_24/7,

    Hey guys, having some carby issues with my car at the moment. Just wondering if there are any other carby's that are interchangable with the 4AC and if its worth it. Or just better to rebuild or grab a second hand one. Not really chasing power or anything. But wouldnt mind a little bit of extra go. Cheers Brownie

  26. Started by Addicted,

    Does any one have, or know where I can get some from ?

    • 1 reply
    • 1.9k views
  27. Started by Myki91,

    Hey everyone, i had my motor changed, its still a 4af carb, but just curious to know if i should get the carby tuned? If so how much does it roughly cost? Also should i get the timing checked?

    • 2 replies
    • 3.5k views
  28. Hey guys, nearly ready to get my AE82 on the road but ive got a problem with the fuel tank getting pressurised and pushing fuel past the fuel pump (car is on duel fuel) and hence running like shit. Ive had the tank out and made sure all the lines are clear. The charcoal canister isnt blocked etc. Basically ive traced it back to the purge valve. Now the purge valve does work, but I'm wondering if anyone knows what tells it to turn on and off? I'm thinking one of the vacuum solenoids, but I'm not sure which one. So if someone knows it would be much appreciated. I can then much around with vacuum ports to modify the way it works. Oh btw ive tried leaving dis…

    • 4 replies
    • 5.8k views
  29. Bit of a random question, Sorry. Alright, I had a wanted ad up for a little bit to buy an AE82 for my Lovely Girlfriend, Amber. Well I scored one and I'm picking it up on the 2nd of September (Sunday). Amber loves these cars, I don't mind them although they look a bit ugly... I was wondering if there is any body modification or interchangeable panels that'll make it look a little better =P I have already purchased fender mirrors and I'll lower it after I've serviced the car for her but It needs more I think (I'll use any excuse to modify cars). I know there are several front ends that interchange on KE70's and even RA40 Celica's, Are AE82's the same? Even bo…

  30. Started by kingtube69,

    Hi Guys, I have had a look around on the nets about going 4AFC (in my AE92 Corolla Hatch) to 4AGE from a wrecked Corolla. Sadly i missed out on getting a wrecked one with working engine/trans for $300 but that's another story. My question is if i take the entire wiring harness from a 4AGE Corolla and replace mine with it what other wiring is there left for me to do? I read something about needing a Open Circuit relay for the fuel pump but if i'm right i won't need it because I'm taking the entire wiring harness... is this correct? Cheers, Jacob.

  31. Started by Myki91,

    Can any help me out a little? My ae92 4afc corollla just strated playing up, the temp gauge goes to red and shuts the engine off, its not overheating, iv changed the thermo sensors, any one able to give me soon advice on what it could be??

    • 12 replies
    • 8.1k views
  32. Started by micmat,

    Hi Have an 89 SX hatch with cracked L F quarter light--have undone the two Philips Screws but something seems to be tethering it from below Thanks

    • 5 replies
    • 3.1k views
  33. Started by Jed,

    Have a little fuelling problem with my 86 AE82 Corolla Hatch Needs a bit of help to get started by pouring some fuel down the carb. Run's fine until this fuel is spent. Have taken off fuel lines while cranking over but doesn't seem to be pumping fuel. Question is. Where is the fuel pump on these? in the tank? Cheers, Jed

    • 5 replies
    • 3.7k views
  34. Started by scotty.bmx,

    my mate gave me his ae101 sway bars as he is moving and i was wondering if i could put them into my ae94 corolla? any help would be good thanks

  35. Started by Terminal,

    I've got an AE112R Sportivo Turbo, and while driving it likes to turn itself off. showed this to mechanic and NRMA dude, neither of which have any idea yet. it's still at the mech, but if i could get an easy fast solution it means i can get it back on the road. Basically after about 5 - 10 minutes of driving the car cuts out, as if i turned it off. if i turn the key to off, then back on again it will crank over. It doesn't get affected by the way i drive, either grandma like or takumi drift style. Anywho, i'm just wondering if anyone else has seen this problem before. I'm thinking either faulty ignition barrel or distributor/ignition coil. let me know your thoug…

    • 30 replies
    • 50.9k views
  36. Started by rhysscott,

    hi everyone, i have a issue with my ae92 hatch, started disc front drum rear, i did the common upgrade to the s2 sx front n rear setup except i got slotted rotters on front. all was good untill i was defected for my turbo and long story short after going to get engerneers cert. he wanted a brake test to show i didnt have all my stopping power in front. so i got a brake test done and it said i have 92% on front 8% rear he said i need more than 8% at rear my question is that has anyone else encounted this and how you may have fixed this. i was told from a brake person that i needed the master cylender from the disc/disc setup and what i had was the disc/drum settup but…

    • 7 replies
    • 10.7k views
  37. Started by 84Co-Rolla,

    finally took my ae71 4ac for a drive, had to go and buy a new battery as the old one was screwed. put the new battery in fired straight up and let it warm up for 20mins, sounded fine as i got it tuned like a month ago but as i took it for a test drive it just started to run like shit, skipping beat and i just don't know whats wrong with it. would it be that it hasnt gone for a drive for like 3 months? any help is appreciated! cheers, aaron

    • 7 replies
    • 8.9k views
  38. Started by Trev,

    So I got my 71 on the weekend and as soon as I seen it I immediately thought 'spirit' as it has several spirit features (interior, wing and grille) but it is badged as a CS-X. Now I can remember something from my old ae71 sales brochure that said that the spirit was basically a stickered CS-X. Basic run down: 2 tone seats. Colour coded grille. Spirit wing And all the other cs-x options (except boot/fuel release). passenger vanity mirror. internally adjusted side mirrors. Tacho dash. Console compartment. retracting rear belts. Front door pockets. Now I don't really care if it's a cs-x or if it's a spirit as it isn't going …

      • Upvote
    • 27 replies
    • 51.7k views
  39. Started by Addicted,

    I have noticed for a long while that under the bonnet there are 4 holes at the top of the strut, but only 3 holes used. I have read some where that if lh rh struts are rotated to the other sides and the opposite holes are used this makes handling more assertive. It could of been in one of my many dreams or I did in fact read it somewhere and can't find where. I have no Idea what I would search for. I am only a noob, and due to this I thank and welcome your advice

      • Upvote
    • 8 replies
    • 6.4k views
  40. Started by scotty.bmx,

    can i use interior parts from my ae95 wagon to put into my ae94 sedan? (seats, dash, trims including door trims) and the front bumper, will it fit/bolt straight on? thanks

    • 4 replies
    • 3.4k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.