Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by Twincam16seca,

    Hi all Does anyone know if the AE86 hubs are the same as the xt130 hubs, being the off set if that is possible and the bearing size? I have got the corona front end with ae71 springs with 1 coil cut to get the right ride height but its too soft (wollowy). Also the brake pedal is still soft at first but if I give it another quick pump it pumps up nice and hard, i have blead them twice, so if it was like that all the time i would be happy with them. I thought the MC might not be big enough??? As for the suspension how can i stiffen it? or if i bought AJPS coil overs could i use the xt130 twin piston brakes? All help is appreciated.

    • 10 replies
    • 4.3k views
  2. Started by madmax7,

    i removed my motor from my ae82 and i undid the drive shafts from the wheels so i could pull the shafts out the gearbox but theres this bit on the shaft and has 3 ends on it where in seems to lock into joint but ive never seen them do this before ive only seen the whole lot come out the box does this mean i f@$ked them

    • 11 replies
    • 13.4k views
  3. Started by jhyperus125,

    hi everyone! I want to learn maintaining my car. So I'm looking for engine repair manual of Toyota 3a-u engine. Please help me. I want to turn my engine back to its original condition.

    • 3 replies
    • 2.6k views
  4. Started by jimmy-d,

    Does anyone have a wiring diagram for a ae82 4 door sedan 4a/c single cam 1.6? My a/c compressor is not getting power to operate so I'm wondering where it is switched from!If I run a positive direct from the battery it works fine so the problem is definitely in the switching of the power supply. The a/c button and the economy button both have power to them as they light up fine when the fan is on so I'm wondering where else to look!Only other option seems to be to wire in a bypass switch direct from dash to compressor with positive supply but I would prefer to have it work properly if possible. Any and all help appreciated.Thanks.

    • 16 replies
    • 21.1k views
  5. Started by jhyperus125,

    Hi everyone, I am a newbies in this forum. I looking for anybody can help me to teach me on maintaining my pretty old car having 3a-u engine. i don't know what model. Anybody can give me an engine repair manual for 3a-u engine?

    • 0 replies
    • 2.2k views
  6. Hey I'm doing a 4age and manual conversion on my ae71, ive basicly swapped everything out of my ke70 which was allready done. Now ive got to cutting out the tunnel to suit shifter position, which is no drama. i just noticed the tunnel itself is differnt in terms of how the boot would bolt up. are the shifter boots the same as per ke - ae obviously suiting the tunnel? or am i just tripping balls.

    • 3 replies
    • 3.5k views
  7. Started by PLZ818,

    Hey guys I'm new to toyotas and this forum as well I'm not sure if i posted this in the right thread (if not can a mod move it please ). Well the reason I'm here is that I'm in the market of building ae86 with the intent to use it as my streeter and track car for my misses and i. iv been doing a little bit of research on them and come up with an idea of what i want to achieve in the end a full ground rebuild with a n/a carbie 4age but I'm a little confused with engines silver top or black top I'm not sure (thats where you guys step in ) coilovers and street trim thats about as far as iv gone with idea so input bad or good i would love to hear some! cheers! XD

    • 23 replies
    • 25.6k views
  8. Started by Twincam16seca,

    Hi every one, Just wanting to find out if there is such a bell housing for a 4A to celica steel case 5 speed? as i have one available to me but need a bell housing! I know there are the ones available for the w56/7/8 etc but they have a different bolt pattern on the mounting face. Any helnp is well appreciated!

    • 9 replies
    • 4.7k views
  9. hey all, i've somehow managed to crack my exhaust manifold between the block and turbo, I know karllos has done this as well at one stage and was just wondering what are my options. is it worth upgrading turbo size and getting custom manifold, because i can't find any aftermarket manifolds and toyota parts are useless.

    • 12 replies
    • 10.8k views
  10. Started by Twincam16seca,

    Hi everyone, Just wondering what W5* series gearbox suits the ae71 best and what would it be from, as not to put the speedo out? I know it would also depend on the diff ratio, i was planning on using a corona disc brake diff, i think the ratio is 3.86:1 or something close it. SO i guess the question is what gearbox goes with what diff ratio the best? Any help is appreciated!

  11. Started by wicked666,

    Hi everyone, my name is Chris. I haven't really posted much on these forums or anything. I was just after some info on the AE112R turbo corolla. What are the common issues with this model of car, i have done some research on here and found some issues regard exhaust manifold and ECU, can someone shed more light on these issues? What is the max amount of boost you can run with the standard ECU and injectors ETC? I am really after as much info as i can get.. Thanks in advanced...

    • 6 replies
    • 4.9k views
  12. Started by ae95rwagon,

    Just got this car and at 135km in 22 years it is pretty straight,having stepped out of a AE82 which got a right thrashing on bush roads I want to make sure the new baby is running well for my trips,so i am resolving all mechanical bugs and then altering suspension height and strength. So it gives a nasty shudder in 1st (manual) esp turning. I went over the car thoroughly and decided the likely culprit was broken front lower engine mount. Which had separated. But still shudder, somewhat less, but it is there. So my question is there any know cause in this car that can cause this bug,i lifted up the rear wheels and the diff has very little backlash and the driveshaft h…

  13. Started by ae71rollr,

    hey guys just trying to find a bonnet to fit my ae71 spirit, but it seems hard to find a bonnet. i was just wondering if the 1984 ke70 bonnet would fit? or if any others would or what would be the easiest way to get a bonnet?

    • 6 replies
    • 7.3k views
  14. Started by turbo_sloth,

    I would love to put a 4age 20v in my Ae92 but i was thinking for now i might just mod my 4afe. i was thinking of cams and clutch, what would be good bang for buck? trying to stay NA. but would love to go turbo if a cheap way is good.

  15. Started by GDH57,

    Does anyone know where I can download a 4AGZE workshop manual? I have an AE82 with a 4AZE fitted and need to rebuild the engine for hill Climbs and Sprints etc GH[/size

    • 3 replies
    • 5.8k views
  16. Hello, new to this, i just bought a 88 ae95r with 135km only. It was single owner and apart from a few trolley dents is in overrated condition.But it has four things i would like to fix 1 I want a bullbar does anyone have one in Sydney Australia?They want to sell 2 The diff lock dash light does not come on, does this mean the solenoid is gone and i have to remove the gearbox? 3 It makes a thumping sound at the rear under acceleration,is there a way to determine where in the tail shaft it is worn 4 The A/C heater fan only engages on setting 3 and 4,what is the best way to fix this? Any hints gladly appreciated Lastly I had a mind to change the original 13in alloys t…

    • 19 replies
    • 16.6k views
  17. Started by Twincam16seca,

    can some one please help me!? I just removed my stock ae71 strut and control arm set up and replacing it with the xt130 LCA's, struts and brake set up, but am unsure if i needed adjustable camber tops, or if i could use the ae71 or xt130's? is that a noob question or what?? I have trial fitted the ae71 tops and it fouls the top of the corona spring retainer (as i was going to use corona springs with 1 coil cut out) and from what i can tell that wouldn't allow the strut to pivot when turning?...am i correct? so any info ASAP would be great!

  18. Started by Mat10e,

    I have an ae71 which has ae86 struts in it but i am still running the ae71 lca just wanting to no what will bolt straight in an give me the most camber without camber tops Cheers

  19. Started by saunders1990,

    hi just woundering if anyone has engine oil specs and/or repair manual for ae111 with4age 20valve blacktop or if anyone has a car with this engine that is confident they know what oil is best for the engine....... thanks

  20. Started by Cybernetic,

    Hey guys, I'm new as you can tell by my post count. I recently bought a AE112R Conquest Seca Corrolla and had plans on making some mods however had no idea that parts for this car was so limited. There isn't any aftermarket support for this car and is driving me insane. The only thing I did so far is bought the Levin grille. Plans are 17" Rims and Sportivo sideskirts and Front Lip. Things I'm after are rear sunguard, spoiler riser, Sportivo pedals, carbon fibre bonnet and scoop, smoked tail lights, etc. I just can't find it anywhere. Can anyone here point me in the right direction? I've always been let down =( Before you ask, yes I already asked Toyota.

    • 3 replies
    • 9.3k views
  21. Started by Ella,

    Hey guys as per my topic title after a vacuum manifold anyone on here making them or know where i can buy one

    • 3 replies
    • 2.7k views
  22. Started by rollake70,

    just asking i have my 1984 slanty front, does anyone have special ways of getting these on ? i have no brackets to get them on :[ , has anyone made them?? just after any great advice to get them on thanks

    • 4 replies
    • 2.1k views
  23. Started by beatle,

    Has anyboby tried to fit 4age 20 valve quad throtle bodies to a 16 valve head ive made a manifold and fitted a set to my 16 valve but i can't get it to run proply any suggestions?

    • 8 replies
    • 4.6k views
  24. Started by crundyy,

    when i start it it starts fine but you can hear the starter motor still going for a bout 1-2 seconds most time i start it??

  25. Started by twisted2,

    hi guys I'm currently doing some wiring on my 4age conversion i was wondering if anyone knew the colour codes for ae71 alternator and ae82 colour codes as i need to extend my ae71 harness and adapt the ae82 end on it ??

  26. Started by AE82stew,

    Hi guys, Not sure if this is the right place for this thread, but I'll give it a shot; Howdy, So, I had a good day at the wreckers today. I managed to pickup an original Toyota AE82 front spoiler for $30. The downside is, it's pretty shagged. There is splits at each corner and someone attempted to screw it back together (fail attempt). So as my idea goes; Perhaps I could mold it and make a fiberglass replica. The two things going against me are, I have NO fiberglass experience at all, AND the spoiler is made of rubber (thus making it hard to mold, as I would imagine). I'm keen to make this work for my project car, and it will be the perfect touch f…

  27. Started by DKG779,

    Hi I am having problems with my 2A-C (Auto) pinging, closest I can get the timing is one degree of factory specs.... It will not run e10, standard unleaded, does not run well on bp ultimate 98, or Caltex Vortex 98, and stay away from freedom fuels (even their Premium has ethanol although they seem to deny it).... The petrol I have had that has been the best is the Caltex Vortex 95 R.O.N. However when it is hot it still pings under moderate load, changed the temp sensor in it, checked the thermo fan all good. would this indicate that the timing belt isn't lined up correctly therefore making the harmonic balancer timing marks out of whack ? (Also engine has 158,000km's on i…

    • 10 replies
    • 4.3k views
  28. Started by Trev,

    Well I am starting to get a bit fed up with people saying that all C52's were a 'mickey mouse' gearbox (2 starter humps), this is not the case, I have owned both with them and without them and have even had C50's with 'Mickey mouse' ears, one of the patterns that I have followed is that the series 1 82's seem to have 1 starter hump whereas the series 2 & 3 have the 2 starter humps. And just to leave the gearbox experts pondering, this is a pic of the C50 in my mums series 2 82: Engine bay for proof: 2nd hump:

    • 2 replies
    • 12k views
  29. Started by Killar_of_giants,

    car = AE101 Inspection = approx 80% left on the front disc pads and about 50% left on the rear shoes. Drums have lite scouring as to be expected and so do the front discs but less then the drums. The front discs have plenty of life in them, like they've never been machined. I'm no expert, just my observation looking at the thickness. The squeaking isnt constant with every touch of the brakes, its intermittent. Always happens when leaving the driveway in the morning. I'm convinced its coming from the front brakes. Happens mostly when coming to a complete stop at traffic lights etc(say slowing from 20 - 0 kms). The car came to me threw good ole mum who had it s…

      • Upvote
    • 11 replies
    • 4.6k views
  30. Started by ToasticlesAe82,

    Compressor still works, cold air still passes through the ducts but fan does not work, interested in a repair guide or link to one, for repair to the fan/wiring harness Cheers. rolla: 1986 Ae82 Corolla CS-X Sedan, 5 speed manual 1.6l 4a-e engine

    • 13 replies
    • 12.7k views
  31. Started by tobiemb,

    i put a 32/36 webber on my ae71 wagon and it wont idle, it runs fine but you have to keep revving it other wise it dies like there is no fuel. i have cleaned all the jets. any ideas what would be wrong? thanks tobie :y:

  32. Started by Twincam16seca,

    Hi every one I have been looking at turbo's for the 4agze motor and am a bit stumped on what to go for, e.g the garretts from SR20DET's or a bit smaller as its only a 1.6L? Turbochargers > GT25 Family > GT2554R - 471171- 3 Turbochargers > GT25 Family > GT2560R - 466541- 4 Turbochargers > GT28 Family > GT2854R - 471171- 9 Turbochargers > GT28 Family > GT2860RS - 739548 - 1 If anyone can tell me what they would behave, as in taking longer to spool etc would be helpfull as to which i would go for. I'm also not clear on what the A/R size means? I'm not planning on huge power, say nothing over 200kw, so i was thinking GT2854R - 471171- …

  33. Started by ac17,

    Hi all I found this forum via a Google search and thought I might post here. I am now the proud owner of a well-cared for 1987 AE82 4AC manual corolla liftback (seca), with only 118,000Kms on the clock. I am having probs I did not pick up during the test drive - when coasting in 3rd or 4th (eg anywhere between 2000 and 3000 RPMs), I notice that the car is having mini flat spots (or stutters), but when I floor it and rev higher than 3000 RPMs, the car has heaps of grunt and the problem goes away. What could be wrong - is it a carbie issue? MORE INFORMATION: -the car idles smoothly -the problem does not happen much below 2000RPM -the slower you work up …

  34. Started by Boosted,

    Got an AE93 corolla that I'm building up for motorsport. I want to install a hydraulic handbrake, but the cross braking setup of the AE93 master cylinder doesn't make this real easy. I've heard the AE82 m/cyl has the two regular outputs and then goes to an external proportioning valve for the brake balance, rather than the integral setup of the AE93 I have. So question is two fold, do the AE82 m/cyl's have just the two regular outputs ? Will the AE82 m/cyl fit up to the AE92 booster ? Or will I need to swap the booster as well, or is there another option I'm not aware of ?

    • 5 replies
    • 6.4k views
  35. Started by crundyy,

    hey fellas, my names andrew and just about to purchase my first car tomorrow a 89 corolla, just wondering what the go is such as what are the main things ill be needing to look at before buying it. Help would be greatly appreciated :) cheers.

    • 4 replies
    • 4.5k views
  36. Started by Twincam16seca,

    Just wondering if i can use ae86 shock inserts in the xt130 set up i am tidying up, as i don't know what the insert diameter is? e.g Tokico or some others that may be better if any one has suggestions? At the moment i have some oil filled inserts in there that i haven't pulled out yet, but both seem to be in good condition, i want my car to be legal height so I'm not sure if short strokers would be required? the car is planned for a weekender and hill climbs... advice or a point in the right direction would be great! cheers guys

  37. Started by tobiemb,

    the 4ac in my wagon wont start, its got spark and there is fuel coming to the carby because when you undo the fuel line it squirts out like its under alot of presure.it will run if you poor fuel down the carby but then it dies once it runs out. could the jets be blocked? whats the best way to clean them out? also i need to know what vacuum lines are required and what ones arent as the last owner has pulled most of the hoses off. any help would be muchly appreciated :y:

    • 4 replies
    • 5.6k views
  38. hey pplz just completed my 4ac to 4age 100kw 16v conversion . i got a set of extractors 4-2-1 that end up siting along side the end of the gearbox . i took it for a drive , besides the extremly loud freaky noise it makes with no exhaust , the car absolutly went no were . I'm guessing this is because my car needs the full exhaust system , and it doesnt have back pressure . i mean it was just loud for nothing , had no pull had really nothing more then the 4ac motor i had in there b4 . i no the motor isnt anything fasttttt but some1 please tell me its only exhaust i have to do 2 get the power from this thing

      • Upvote
    • 25 replies
    • 36.8k views
  39. Started by libbor,

    Hello all I'm after some info about a 2t gearbox Is there a shim that goes between the snout and the input shaft bearing Doea anyone have an exploded diagram of the gearbox Cheers Libbor

    • 0 replies
    • 2.1k views
  40. Started by eberbs,

    This.... Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us

    • 2 replies
    • 3.8k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.