AExx Corolla Discussion
1398 topics in this forum
-
G'day All, I hope this is in the right part of the forum, My name is Wayne I am new around here, I'm in the process of looking for a cheap run around to drive to work and the minister for finance, war, and social engagements has told me I can't have another V8.. So I've been looking at something smaller then a commodore The 89 to say 92 rollas have caught my eye so I am wanting to find out what I should look for as far as problems when I go to look at them.. Any help would be greatly appreciated.. Cheers, Wayne
-
- 10 replies
- 3.8k views
-
-
Hey guys I'm just wondering if there is any advantage to using ADM AE86 front struts in an AE71. Is there any improvement over the standard front struts? i just have a spare set on front ae86 struts wondering if i should use them in my ae71 wagon. cheers :y:
-
- 4 replies
- 3.5k views
-
-
hey pplz need 2 get stiffer springs 4 my ae86 was told that falcon springs r a direct replacement fit . can any1 tell me the stiffest model spring that fit on my ae86 . thanks 4 the help again guys
-
- 4 replies
- 4k views
-
-
hey to get a 4ac motor that came out of a sprinter into a ae82 front wheel drive car does anything need changeing at all need to know asap cheers max
-
- 6 replies
- 4.5k views
-
-
Really random question once again from me :D I was driving along one night and suddenly realized, the button the right of my steering wheel for central locking, doesnt have a light behind it liek the two on the left for back window washer and demister. Did the central locking switch ever have a light behind it that lights up when you turn on the headlights? Or am i just imagining things, because it looks like it should be lit up.... Cheers!
-
- 3 replies
- 3.2k views
-
-
Hey guy I have a friend that needs a Crankshaft for her 4age and I don't know how to tell the difference between big port and small port. I don't even know if there is any difference between the crankshafts or not. Probely not but I thought I should ask.
-
- 8 replies
- 21k views
-
-
hey pplz before the flaming , ive looked around and ive found a few different responses . my spaz mates have been playing around with my ignition timing , thinkin they know how 2 set it , now the car has no pull at all , and only way up top it has a strong pull , so I'm thinkin they advanced the shit outa of it . so i retarted it a lil and now running better , i just want to set it with the timing light properly , I'm running 98octane in her , what the standard stock 4age 16v run? and how much more can i advance her to get a lil more power out of it safely? cheers guys
-
- 2 replies
- 52.7k views
-
-
I got a 87 rolla seca off a mate for next to nothing, it goes like hell and i thought it had a 4ag(N/A) in it at first but after checking it out I'm not sure what engine it has, still a 4 banger east west engine but the extractors come out the front towards the radiator then curve back down under it??? i looked all over the net and this site but can't find a pic like it. ill try and post a photo of the engine asap
-
- 19 replies
- 7.9k views
-
-
hey pplz doin a surge tank setup in my ae86. just want to make sure ive got all the lines and fittings were there supposed 2 be , can any1 tell me if this set up would be right the top fitting is the return fuel overflow that goes back down 2 the main tank the 2nd from top is the return fuel line that comes from the motor the 3rd is the feed from the intank pump that fills up the surge tank the 4th bottom fitting is what connects 2 the external pump and goes 2 my motor . is this the right combination cheers guys
-
- 7 replies
- 10.1k views
-
-
hi all. just registered, so go easy. i have a 1992 Toyota Corolla Seca, 5Door Liftback, have had it for a few years, and i also have a nissan patrol as my daily. my old girl usualy drives the corola, since i have the patrol. anyway, as i said. its a 1992 Seca, 1.6L EFI (i think) AE92 (whatever that is) now, i am not realy a toyota person, I'm more a nissan man, so i have little knowledge on engine codes, and wheel selections especially for smaller gars. lol. now, I'm after some decent mags for it, it looks sh*t house, with the hubcaps. and i know that the paint isnt the best, but i will hopefully respray it soon. now, all i know is that its factory height, and…
-
- 1 reply
- 1.8k views
-
-
So my best mate just bought himself an ae82, and has realised that the fuel gauge in the dash is intermittent. sometimes it works and sometimes it doesnt. the car hasn't been modified to my knowledge so its the stock 4A. now he's a datsun boy and I'm a rolla boy, so he's asked me to get some help. Any ideas?
-
- 3 replies
- 4.3k views
-
-
Front wheel drive clutch replacement, say whaaaa?? :S Friend doesn't have much cash, really needs a new clutch, considering doing it himself, is this as annoying as it looks?? His dad is reasonably competent, and I'm also not a COMPLETE dud......sometimes, but being front-wheel drive it just looks confusing Really just wanna know what i should be looking out for when removing the gearbox, does the engine need to be lifted out?, driveshaft(s)? disconnected? etc. Initially i'm thinking that as its a front wheel drive its going to be a pain to replace, and probably should be left to a mechanic?????, tell me if it should and i will suggest this! Thanks for an…
-
- 2 replies
- 8.3k views
-
-
hey peoples i was told that i can see use my standard accelerator cable from my 4ac on my 4age . am i doin it right? or do i need 2 replace it? also if i need 2 change it , what car should i take it off for a direct fit any help would be good as always thanks pplz
-
- 8 replies
- 5.1k views
-
-
Got an AE92 with the 4AF-C Engine and a 3 Speed Auto, I believe they're the A130L. My Tranny is Dead (Left without Fluid for WAY to long I Believe) And I am planning on replacing it very shorly because I miss my car... ANYWAY, Is there a 4 Speed Auto that will bolt straight up without much hassle, I plan on doing the work myself so the easier the better. That being said I am pretty handy so a small abount of rewiring etc will not be a problem What are my options...... Any Help Much Appreciated
-
- 4 replies
- 5.4k views
-
-
Hello, I have a 1989 Jap import with the AE91 frame and 5A-FE engine. Looked for a manual everywhere without success. Does anyone know what timing belt kit is required? Still well below 100k but most of the imports have the clocks wound back - already had a breakage on another machine! Thanks - Dave.
-
- 4 replies
- 2.7k views
-
-
Hey all, New to this forum and to Corollas, but according to wikipedia I have an AE96 Corolla RV that's a little bit floaty. I think this is due to some old shocks (probably still factory) so can anyone tell me if the AE96 parts are interchangable with AE92s (in general, obviously other than the motor being 1.8L and the trans being 4 speed)? Thinking some new shocks / springs and maybe pads and disks will be the go other than a full service. Also can anyone suggest some cheap shocks / springs and where to get them (I'm in Adelaide)? Regards -Dave-
-
- 2 replies
- 2.3k views
-
-
Hey guys, how much would the average panel beater charge to fix this type of ding? or would it be worth getting a new door + panel? cheers!
-
- 3 replies
- 1.9k views
-
-
My clutch is going to need replaced in the next few months...maybe weeks. Just wondering what sort of cost i might be looking at and any recomended garages in Brisbane for doing it? Or is it do able with a decent set of tools and some know how (and time)> Any info on the topic of changing the clutch would be great i.e. whether to buy one myself to be fitted or let the garage handle the lot. Its a 1989 CSX Twin Cam carb engine, 5 spd. Thanks
-
- 2 replies
- 14k views
-
-
Hey guys!! some of u may know that recently i got my self a ae93 gze rolla! so here is the deal, clutch is on the what out... now i know there are a few different clutch sizes and what not in this area, if some one could help me to find the right clutch for my car that would be muchly gratefull :> i would probs need spline size and how many teeth ect so i can let repco or bursons know i need to know before i pull it out because ill be doing it at work one weekend and don't really have another car to get around in if i need to orderparts Cheers tory! Ps: 4agze 16v, map sensor, not to sure on the other details.. so if u need more just ask me and ill find out …
-
- 20 replies
- 13.8k views
-
-
Hey all... Doing the old 4AGE into an AE71 conversion and i'm setting up the fuel pump & i need to know what kind of intake pump i need. I'm not looking to use a lift & pressure pump setup (i.e. a VL commodore), i'm after an in-tank setup to keep things clean. I've searched here and elsewhere and on the advice of what i found i went out and grabbed an AE82 pump from a smallport, but it is way too big to fit into the hole, let alone needing extra room for allowing a longer bracket to reach the bottom of the tank as the AE82 one is far too short... So i really need to know exactly what kind of pump others have used to fit down into the hole? Ch…
-
- 1 reply
- 14.6k views
-
-
I'm wanting to install HID lighting into my AE102R. I looked through the repair manual and it doesnt list the actual globe type i need. Anyone know? Or has anyone got some good online resources for learning about how to do this?
-
- 13 replies
- 4.7k views
-
-
my engine seems to be leaking oil out of the dizzy. Ive heard that the o ring in the 4a's do this often. Is it a common problem? And whats the best way to fix it?
-
- 3 replies
- 1.8k views
-
-
Removing the snorkel from my AE102R...was a bit tricky but i have it off now. Now i noticed that through that hole where most people put their pod is a black box. What is it? It's just inside the front wheel guard.
-
- 4 replies
- 3.3k views
-
-
my diff in my ae71 with 4ac is pretty shagged and i found a ke70 manual diff will these bolt in the same and the brakes fit on from the ae diff? cheers steve-o
-
- 4 replies
- 2.3k views
-
-
I was recently driving home from Melbourne to Canberra along the Hume when we heard a large thump. Shortly after we started hearing some grinding noises that sounded like they were coming from the engine, gearbox, driveshaft or diff. To cut a long story short, it turned out that the bolts for the bracket that holds up the center of the two part driveshaft had come loose. This meant the driveshaft was hanging down and touching the exhaust. Since we were about 30kms from anywhere I went into emergency repair mode and discovered that the bolts from the seat mounts actually fit and was able to make it the rest of the way home (with a wobbly seat). My question there…
-
- 2 replies
- 3.3k views
-
-
Hello. I have a KE70 and I have found a Daihatsu Charmant with 4AC and T50 on a junkyard. And my question is does the Charmant have the same driveaxle as the AE86 ? same splines and length ? also has it the same front engine bay parts ? I mean the metall section where the engine mounts are. same width ? Thanks Jakob
-
- 5 replies
- 3.6k views
-
-
Does anyone know if an AE86 rear sway bar or rear end is the same as the AE95r wagons? i got told supposed that the rear diff and axles are the same and also got told that the rear was from a gt4 celica. any clues to what it might be? i just want to upgrade the rear sway bars for better handling
-
- 0 replies
- 2.6k views
-
-
Some little so n so amateurs tried to break in through my boot the other week. Destroyed the lock and surrounds. Anyone seen the rear garnish in good nick at a wreckers/auto spares place? Pick n Payless had one but sold it the other day :jamie: Anyone know what the rough cost would be?
-
- 1 reply
- 1.5k views
-
-
hey guys, just wondering if any one could clarify if an aftermarket AE86 exhaust will fit a AE71 properly, i don't want to spend a bucket load on a off the shelf exhaust system to then need some dodgy guy mangle it to fit, i understand that it might be defferent near the cat but thats not a major problem, just the mounting points really, i have been looking at buddy club, megan and hks exhausts if any one has had any experiance, i will be going hks headers aswell thanks for all your help, casey
-
- 7 replies
- 10.1k views
-
-
I'm changing the discs, pads and brake fluid on my 1997 Corolla 1.8 Conquest. I bought the Castrol dot4 fluid but when I took off the brake fluid cap it says to use dot 3 only. The Castrol dot4 fluid says it can be used in dot3 and dot4 specified products. But also says except where dot3 is specified. Is it safe to use the Castrol dot4 fluid or should i buy a dedicated dot3 fluid? Cheers
-
- 18 replies
- 19.9k views
-
-
hey guys changing the gasket on my mates ae82 just need to know if there's any hidden secret to it. for example my dads n13 pulsar you had to replace the bolts everytime you take them out cos they stretch. i don't have a manual I'm basically adlibing this whole thing so some hints would be a hoot. and if any1 knows the torque setting for the bolts that would be awesome too. cheers
-
- 7 replies
- 5.8k views
-
-
I'm changing the pads on my 97 corolla conquest. This is for the rear wheels: I have removed 3 bolts, 2 that hold the caliper braket and one at the bottom of the caliper. Still the caplier isnt coming off. There doesnt seem to be any other bolts that i can remove. There is nothing at the top of the caliper. there seems to be a round thing where a bolt would normally sit but there is no way to remove it. However the front calipers have bolts holding the top and the bottom in. What bolt am I missing for the rears?
-
- 13 replies
- 3.4k views
-
-
Hi Everyone, i am after extra long Lug bolts for my AE92 Corolla they are for the rear wheels, because i had to fit 5mm spacers in the back so that the 17' wheels fit, the nuts "just" fit. spacers weren't required for the front they fit just fine, for peace of mind i would need longer bolts than the stock bolts for the rear. where can i get them? the rear brakes are drum. please help me out. thanks heaps! :)
-
- 16 replies
- 30.1k views
-
-
Hey guys! i have a ae92r with a 4afe my exhaust is falling to bits... i wanted to replace it with something less restrictive.. i heard a rumour that a 4age manifold bolts straight on...? is this true??? cheers scotty
-
- 2 replies
- 3.3k views
-
-
Hi All... need to get my Valve Clearances checked... are there any settings i should reccomend to my mech?
-
- 5 replies
- 10.8k views
-
-
Hey guys, just bought an ae112. Its at 150k, just timing, clutch and full service done. Got some new wheels and some new tyres. Got the stereo system going on in the 14th. But i ordered some extractors off ebay, they will probably come wednesday also. Upon looking under my heat shield. I see extractors? What I think are extractors? The lady who had it before me was old and would not have had them fitted. Does the AE112 come stock with extractors? Or extractor look-alike heads or something? If they are extractors, will there be any use putting the ones i have bought on? Thanks, Chris.
-
- 7 replies
- 11.3k views
-
-
Hi Everyone, I was just wondering, if i had a Lube service in my car, topped the oil levels to the max.. 3000kms later, is all the oil mean to vanish completely? or should the oil level have diminished by little? i am suspecting there may be a problem with the engine.. unless I'm completely wrong. can someone please shed some light on this. thanks
-
- 21 replies
- 8.5k views
-
-
I've decided to chuck a 16v in my ae82 seca. I was wondering which gen 16v would be easier to get my hands on, is there more of one version than the other in Aus? Btw I'm wanting a front cut for the job. I was going to keep the original gearbox from the ae82, good move? Or should I use the 16v box? Thanks.
-
- 6 replies
- 3.9k views
-
-
Hey all, I was just wondering if it is fairly straight forward to change an auto to a manual in a ae71. I know you have to get a pedal box, Gear box, Gear box cross member and master cylinder into the fire wall. Do you need a new tail shaft aswel? or a bitsa one?
-
- 5 replies
- 5.2k views
-
-
Hey AE93 Seca with a 7A-FE engine fitted. Having never had the tappet cover off an A series engine, can anybody advise me on the (I'm)possibilities of changing the valve stem seals without removing the head off the engine? I've been told that you cannot physically do it as the valves are too constrained by the lack of space around the cylinder head. Anybody got around this? can you hold the valves in place with a leakdown tester, remove the camshaft and the shim/bucket assembly and then carefully push on the top valve retainer with a large screwdriver, remove the collets, remove valve spring and replace seal and then reassemble? reckon it would be possible? I…
-
- 9 replies
- 16.6k views
-