AExx Corolla Discussion
1398 topics in this forum
-
hi Folks, i have an 1990 sx seca liftback manual, i have done a search on the site but cannot find a comparible problem so the problem i have is this the engine warning light comes on when the thermostat kicks in,car appears to run ok, i do not drive it far!!! i have checked radiator level-good, checked engine oil-good, any suggestions/advice will be greatly appreciated. cheers mark
-
- 26 replies
- 36.5k views
- 1 follower
-
-
just simply, will ae86 coilovers fit into a rt142 corona. like are the two bolts that connect to the knuckle on the lca the same. or what do i need to do to put ae86 coilovers in. i will change the hats to suit aswell. thank you in advance to any help. cheers :) Andrew.
-
- 10 replies
- 8.7k views
-
-
just wondering does anyone know if a auto and manual ae71 tailshaft splines the same
-
-
- 1 reply
- 1.6k views
-
-
hey guys. i bought a ae95r a little while ago. ok I'm sick of changing this post when ever something new arises. so now its simply my i need help and keepin people upto date on the wagon thread... any help will be greatly appreciated daniel
-
- 21 replies
- 5.8k views
-
-
does anybody now were can get some replacement disc for a t series diff or a part number ??
-
- 3 replies
- 2.5k views
-
-
Recently I bought a second hand Corolla car, after buying only noticed that the gap of the rear car boot is quite big. Have some difficulties in closing it down - need to apply some force to push it down. What can we tell from this finding? Is that a design defect/flaw or the car has encountered an accident before? How to check the originality of the car boot? Finally, can it be repaired? Thanks. Regards...Rollazer
-
- 2 replies
- 2.1k views
-
-
Hi guys I have an 87 AE82 rolla with a 4ac engine, it came with A/C when my parents bought it yearssssss back. My dad decided to get the airconditioning regassed (don't know why, it seemed to work perfectly) a couple of months back & around two weeks later it stopped working... Whenever I switched on, the compressor/condensor would make an awful sound so I'm guessing that it is dead & obviously the cause of the A/C not working. Since then I have taken the belt off, just incase I ever feel the need to try it, switch it on causing something bad to happen... Summer is coming up! My question is, does anyone know of any sources for new/refurbished condens…
-
- 6 replies
- 2.6k views
-
-
Hi all, Just replaced brake pads, shoes and fluid on my housemate's 1988 AE82 Seca. Bendix bs1602 shoes (right) have about 5mm less width than the ones that came off. No drama, my parts guy said it's OK and that they probably use a different compound that gives the same stopping. Not that the rears do much anyway. The only thing is if they ever get replaced again the drums may need machining..... having said that, the brakes will probably outlive the car. what was more worrying and annoying was that the shoes didn't fit into the adjusting slots properly I had to file a bit off the slot (bendix on the right) so that they seated all the way. …
-
- 8 replies
- 7.1k views
-
-
Hi all, I am new to the world of FWD, having had KE70s for years. I have noticed that sometimes the temp gauge in my AE82 slowly creeps up to about 5/8. Seems normal, but I want to check before summer gets here. How do I test that the thermo fan is working ok? Is there something I can short out, or measure to see if it is kicking in? I know the other fan is for the A/C, but am learning on this beasty. Cheers Paul
-
- 7 replies
- 5.3k views
-
-
hi ive been having a lil bit of trouble with my 4AC dropping coolant, originally i though it was from the thermostat, but ive changed it twice in one day. upon closer inspection its leaking from something higher than that, as you can see from my pics, these are the spots i assume they are leaking from, yes leaking from 2 spots. what is this called? and is it a pain in the arse to change. ps. the pics are from my 4age motor just using it as an example, but they look identical Thanks
-
- 13 replies
- 7.6k views
-
-
Hey guys I'm about to become the owner of twinky and just want to find out what the maximum offsets I could run on it with flared guards, I'm thinking of some sports maxx wheels as they are multi stud and will also fit my sprinter, Id like the 15x8 but know that aint going to happen with out some flares but was hoping that maybe the 15x8 +15 or 15x7 + 15 ones would fit. thanks Julz
-
- 4 replies
- 3.8k views
-
-
I recently purchased a 94 Corolla Ae101 which has a silvertop 4age 20 valve engine. The engine is running great but the 5 speed gearbox in it seems to crunch when going from 3rd gear to 2nd gear. I think it might be due to a worn out synchromesh, is this correct to assume? If this is the case it means the gearbox will need to come out and get reconditioned which could get expensive. 1. would it be cheaper to just buy a 2nd hand gearbox and get it put in 2. Could I do it myself or does it require lots of expertise and mechanical knowledge. 3. Most importantly, what is the name of the gearbox in my AE101 seca, couldnt find the name anywhere. 4. Are there oth…
-
- 15 replies
- 32.7k views
- 1 follower
-
-
hey folk, i was wondering if anyone has tried to upgrade the rear discs on thier ae92? i converted the hubs to discs, now i was wondering if i can swap the front calipers (and discs and so forth) onto the rear without much trouble? has anyone tried this or looked into it? i read up a bunch but havent been under the car myself yet... please shed some light on it for me.
-
- 8 replies
- 3.3k views
- 1 follower
-
-
My speedo just stopped working but revs fuel and water temp still work.what could it be because I have checked the fuse and it's all good. Has anyone had this problem and can give me any ideas Thanks marti
-
- 16 replies
- 8.5k views
-
-
Hey guys, manual conversion is getting closer on red, but removal of the heater core is part of this task. I need advice on how to remove the original hoses without breaking the metal fittings to the core and tap and in addition the heater hoses themselves. Returning after a drive I sprayed all around the fittings making sure it soaked right through to the rubber. I thought this may assist in some way after a few sprays as it would free the stuck on hoses. I'd rather try and remove them properly before forking out dollars to Toyota buying a pair of hoses. Thanks in advance.
-
- 30 replies
- 45.7k views
- 1 follower
-
-
I got a ae71 running a big port 4age which was a fwd converted to a rwd. On cold starts it struggles to idle, when you start it you need to keep a bit of gas on to keep it idling otherwise it cuts out, after about 15 - 20 seconds it idles better, sitting around 900rpm. when warmed up though it sits around 1100 - 1150 and i have the little idle speed screw that adjusts the butterfly rest position opened fully. any ideas where i should start looking? has relatively new plugs ( <4000km), leads, clean oil and filter, clean air filter and running on 98. There are some water pipes that are meant to run into the intake under the TB that havn't been connected yet if that…
-
- 4 replies
- 2.9k views
- 1 follower
-
-
Hey guys, I'm having a few problems with my 4AC. I have set the idle to 850rpm when warm and if idles perfectly. Occasionally the idle dips down to 500-600rpm then stalls if no accelerator is applied, what could cause that? Also if the idle dips to 500-600rpm if I try to hold it at 1k it'll go to 1k then just drop down again, to get it to idle normally I got too rev it out to about 5k then it'll idle normally until it decides to play up again which can be 2-4 idles later. Thanks.
-
- 10 replies
- 12.8k views
-
-
I'm new to the forum as my daughter just brought her first car, an 89 CSX Seca, and I will be doing the maintenance on it. The first of what may be many questions, the car is fitted with a sunroof which the previous owner said had leaked in heavy rain. What is the best approach to dealing with this? Seal and tape the rubber surrounds, remove and fit new seals ?? Any feedback appreciated.
-
- 4 replies
- 3.3k views
-
-
having problems with my 4age smallport.as soon as i drive the car for say 15 mins and the engine gets warm the idling will get really low or stall if i take the car out of gear or come to a stop? any ideas.....
-
- 8 replies
- 10.1k views
-
-
the engine is a 4A-GE, i've read someware that if the throttle body coolant path has a air bubble in it it can cause high idle, can someone tell me how to bleed it? I have tryed buy removing the rear hose while engine running but that didn't seem to help..
-
- 4 replies
- 3.7k views
-
-
hey guys, check this out http://www.my105.com.au/classified.asp?id=16381&latest=1 looks the part, bet it goes all right too. i didn't realize they ran these as super tourer's?
-
- 6 replies
- 2.9k views
- 1 follower
-
-
Ive been trying to upload the videos onto youtube for AGES, and i just got the new iphone which lets me uploaded directly from the phone, so the quality is the best, but ill upload more videos as i go. Hope you like!
-
- 0 replies
- 2.2k views
-
-
hey ok so i parked my car on the hill today pulled it up to much and snapped the cable was due for it went to supercheap they don't have any need one asap please help its for a AE82 sedan Izak.
-
- 2 replies
- 1.5k views
-
-
I'm looking for some after market bucket seats and seat rails for my ae82 corolla.I would like a direct bolt in because I have been quoted $1000 to get some custom rails made up. I would like to use gtr or wrx seats. Thanks Marti
-
- 10 replies
- 21.1k views
-
-
well i was looking to buy a 97 trueno bz-r as i said in my other thread (dunno if making a new thread is frowned upon but i kinda need help fast here) the bloke selling it was the actual compliance workshop. he repeatedly said the vehicle was 'perfect' and i was welcome to get it inspected cos i wouldnt find anything. also apparently a 'friend of the family' was interested but they were overseas at the moment. well i almost bought it but decided to get an independant inspection done anyway... heres what it turned up... first, and most worrying is that he thinks there is a coolant leak between the head and block, over the starter motor. said he could barely see it…
-
- 3 replies
- 7.3k views
-
-
Hi everyone, Have been trying to do a conversion in a AE71 wagon to the 4-AGE engine. I got a donor engine from an AE82 (1987) Red top Big port engine from what I understand. Here is the story so far. We have got the wiring and everything in place and looks like it is all running correctly. Every test we have done indicates continuity, voltage and earthing are correct. We have injector pulse and ignition. Fuel delivery up to the engine is running fine at correct pressures. Problem: It will not increase the fuel mixture and run correctly i.e add throttle and it dies instantly. :) :D :blinks: Starts on cold start injectors... runs for about ten seconds…
-
- 11 replies
- 5.7k views
-
-
I am repairing my daughter AE82. I have the passenger side drive shaft out as it seems to be loose in the transaxle. I want to check the dimensions of the inner shaft as goes into the gearbox ? The previous owner did many bodgy things to this car. Tim
-
- 2 replies
- 2.2k views
-
-
Quick question (simply because the guy at the wreckers doesn't know, nor do I).. I'm 99% sure (yet not sure enough) that seats from a AE93 Seca will bolt straight in to a AE92 CS Hatch. Is this true? Because the seats there are absolutely grouse and I just got some cash so I am thinking about switching them over (my seats LOOK nice, but the are pretty shagged). Thanks guys and my apologies for being such a novice, I am fearful of wasting money.
-
- 2 replies
- 2k views
-
-
Hey, I've got a 1992 Toyota Corolla Csi Twincam and i need help getting more power and sound but keeping it n/a due to on p's. Would a 3a racing pod fit in the stock air box? If not is there a (write up/tuturial/article/how to) on making a enclosure? Any mods to make it a CAI? If i was to get a whole new exhaust system but with a good looking muffler and tail pipe or cannon what do you suggest? Is there any exterior stuff i can buy for the car like bodykits, lights, wings/spoilers, grills etc? What are the exterior/interior mods for this car? Many thanks, Patrick.
-
- 4 replies
- 8.7k views
-
-
hey guys, today after putting my new speakers in under the dash, i noticed a small, but annoying problem with the car.. for some reason, my engine check light, oil light and handbrake light no longer show up, the tacho, water and fuel gauges no longer work, and the heater and rear demister no longer work.. i didnt touch any wiring behind the cluster, and everything was working prior to putting new speakers and wiring in.. i have checked all the usual blade fuses in the right hand kick panel, and the ones in the engine bay.. anybody got any ideas on what iv missed that would stop all these things working? cheers Dave
-
- 2 replies
- 2.7k views
-
-
hey I'm thinking bout putting sierra shocks in the rear of my ae71. which model sierra short shocks go in. do u have to mod anything or do they bolts straight on. cheers
-
- 6 replies
- 3.7k views
-
-
hey its about time someone reposts for the milionth time now and ask all the noobie questions!! but at least i think mine are a bit more specific as ive read the first 5 pages of threads. ok so i picked up a ae71 recently and want to start playing around with it. it is a stock 4age and i bought it with a pod attached and a press bent 2inch exhaust, the rest of the car is stock from what i was told. So first things first I will be relocating the filter so its not so close to engine and closer to a cold air supply. I will be doing oil change to synthetics this w/e and in perth would 10 -40 be good all year round? any brand suggestions? my upgrades will generall…
-
- 13 replies
- 5.2k views
-
-
-
Hi people. The story goes that I've recently rebuilt my carbi, after 380000 kms, I thought it'd do it some good. So, on it went after the rebuild, but still no improvement in fuel economy. then, its started to breakdown on me, where the car loses power. I rectified this temporarily, by discovering that the plugs had been fouled by carbon. Enter problem - the carb appears to be overfueling. first thought that the fuel solenoids were to blame - causing fuel to be sucked in when the foot was released from the accelerator. replaced these, still over fueling. then went to pick-a-part, to source the carb that I initially pinched the solenoids off - and put that on. still ha…
-
- 10 replies
- 13.3k views
-
-
Hi rolla club people. I have an issue with my Ae82 twin cam seca. Its just started ildling funny. It sort of revs itself, going from about 2000rpm to 2700ish repeatedly. then after about 2 mins of that it drops down to 1000rpm up to 2000 rpm. its wierd it just goes vroom then backs off then vroom up again on its own, no pedal contact what so ever. does anyone have any ideas? starting points of investigation? It did it once while I was going through a bottle o on saturday, then it was ok, now its doing it again today and doesn't seem to want to correct itself anymore. thanks in advance,
-
- 3 replies
- 2.7k views
-
-
Hey guys.. finally got my car a warrant.. but, its still having issues.. engine is a 4agze from ae92 with AFM, and has CAS and coil packs.. problem is the car dies at low rpm when warm, when engine is cold, its fine, and it runs fine over 3000rpm, but anything under and it sucks.. i took it to my mechanic (midas porirua) and they spent 3 days going over it and couldnt find anything and said that its likely to need an aftermarket ecu and an auto sparky.. before i go down that route, has anybody got any ideas? was thinking of changing to distributor and single coil set up? dave
-
- 8 replies
- 8.4k views
-
-
Hey guys First thing is first, finally sold the Falcon :( Next Monday i'll be acquiring an AE92 Corolla CS Hatch :D Now.. The only thing I'm not 100% happy with is the lack of power steering. For me, this isn't an issue, but for my mother it could be :laff: Sooo.. Here's the question.. What would it cost me to have power steering put in? (If it is at all possible, I'd rather have a mechanic do it than me attempt it and fook it up) Thanks guys :D (P.S. Car is costing me $1900 with a rwc and rego till the end of September. Know what is amazing? This guy is spending $1000 on work at the mechanic for the rwc this week for me :hmm:, he's cashed …
-
- 5 replies
- 6.1k views
-
-
here is some photo about my car,i think that must be something missing that what mades my heater not working,is that anyone can show their engine room then i can fix it by myself? thanks a lot cheers
-
- 1 reply
- 1.2k views
-
-
We are disassembling in order to do a head gasket replacement on the AE92 4AFE engine in our 1991 Rolla (one of the last made with a carby); husband (a newbie mechanic, but doing well so far) cannot find the oxygen sensor he is to remove BEFORE taking off the exhaust manifold. Our Chilton's manual does not give photos for "little steps" like this. Any advice? Can send pix if that would be helpful. Thx, Kimby and James (brave battlers in the soggy shire)
-
- 1 reply
- 2.3k views
-
-
hey guys ok, myt mate and i finish working on my car and i accidently smashed into boat..yes dumbass i know lol anyways i need a front bumper for a AE82 sedan ASAP!!!! please help me as I'm f@$ked if i don't get one by sunday please help currently at burpengary anyprice up to $50 or swaps please contact: 0406043258 thanks a billion
-
- 1 reply
- 1.7k views
-