Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by sva50233,

    It's come to my attention that ae82 and ae92 front brakes aere interchangeable. And I already have ae92 rear discs for my ae82 sohc ready to be installed. My question is, assuming that i install the rear discs, will ae92 coilovers now work on ae82 sohc, with only drilling of new holes on the strut boot towers (the three bolts that come out of the tower on top)? If not, how involved will the fitment of coilovers meant for an ae92 be, for an ae82 sohc?

  2. Started by new2rollas,

    hey are all parts of a twin cam rolla ae82 intergratable with the single cam ae82 such as steering wheels etc

    • 11 replies
    • 3.4k views
  3. Started by TheNOBBLER,

    Just wondering if anyone has rolled the inner lip of there 82 or similar front guards? I have recently dropped the car and would like to keep my 16's, but as it stands the front scrubs like no tomorrow. I have rolled the rear guards, that was no problem, but the front has the plastic splash guard in place and it bolts to the inner lip. That is where it is scrubbing. Any help is appreciated. Cheers, J.

    • 6 replies
    • 4.2k views
  4. Started by xdave,

    howdy all you suspension gurus out there :hmm: just wondering if anyone knows if a ae86 rear strut brace/bar will fit my ae82 twinky at this point my only options is a whiteline rear strut brace which is a bit pricey (especially considering i already have the brackets(?) in place) if the ae86 part is compatible then that definitely opens up my options alot more much appreciated guys and gals :jamie:

    • 4 replies
    • 11.2k views
  5. Started by new2rollas,

    hey was wondering what rims to fit to a ae82 sedan. i guessing 4x100 with about +40 or so offset?? And what is the biggest rim and trye combo before speedo starts playing up?? obviously can't exceed stock rolling diameter.

    • 11 replies
    • 28.9k views
  6. Started by ae20v,

    hi guys got a ae82 20v stock ecu starts fine but once it warms up wont idle till i turn it of and it cools down also does anyone know how to do the tacho mod so it stops cuting out at 7200rpm thanks

  7. Started by Le|Garage,

    Hey, I'm wanting to do a manual conversion for my ae71..what parts am i looking at? -t50 gearbox -clutch master and slave cylinder and hoses -pedal box (i can get a t18 pedal box, as far as i'm aware i just have to drill some holes in the firewall?) do i need the manual starter motor and tailshaft aswell? also, will i need a manual gearbox cross member? Or is the auto and manual one the same? cheers

  8. Started by ae71wagonater,

    Is there a lsd diff center available for the AE71 corolla? or do i have to change the diff in my 1984 AE71 wagon to a R31 diff or something? cheers. :hmm: i have a standard 4age 20v silvertop to install soon. :S

    • 18 replies
    • 27.2k views
  9. Started by MR AE92,

    Hey guys my Corolla CSi unfortunately has the rear drum brakes on it and i want to convert to disc brakes. Is this possible? And if so what would be my best options in doing this conversion? I mean conversion by actually swapping the whole entire rear axle... Cheers! Dave

    • 14 replies
    • 23.5k views
  10. Started by Calam05,

    hey guys, my old man used to drive this car but then it started havign troubles and instead of fixing it, just let it be run into the ground. The gears would change fine but you would have to rev the ring out of it to get it to drive. The car has been sitting in my yard for over a year now withour being started. I went down this morning and pumped the accel a few times and it started frist go. what great cars! but when put into gear it didnt drive, didnt even stall. I revved it real hihg, around 5k and got the car to lurch forward slightly. I have a ke55 so i don't know much about this model and I'm still a novice when it comes to cars. The engine still runs nice and smoo…

    • 16 replies
    • 4.9k views
  11. Started by ae92boi,

    Sup guys new here! First post questions: who makes springs and shocks(perferrably for street performance and a lil fun at times) for the ae92? other than magnaflow who makes a 2" inlet and outlet exhaust? and would you guys recommend gutting out the stock airbox then just dropping in a k&n universal filter? thanks!

    • 7 replies
    • 10.1k views
  12. Started by sirehan,

    Hi all New here from South Africa. Got an AE82 hatch with 20V silvertop(stock). Love the 3dr GT, unfortunately we never got it in our country. Anyway, what i'm looking for is the body dimensions for the AE82 hatch. The chassis mounting points in relation to each other or any other data concerning the body. Thanks

    • 0 replies
    • 2.1k views
  13. Started by gt88,

    When the car is first turned on and you make a sharp turn there is a squeaking noise. But after that first turn there is no more squeaking. It sometimes happens if the car hasnt been used for several hours. Any ideas what it is? My car is a 1997 Corolla. Cheers

    • 4 replies
    • 4.1k views
  14. Started by crazywhiteboy,

    Hey guys, I bought Stephens Corolla about a week ago, and now it's giving a whole lot of trouble, it's coughing up black smoke, and the timings out, I'm not so worried about the timing, but the black smoke worries me a lot, I think black smoke means that the motor gets too much fuel, if that's the problem, what can I do about it? If anyone can give me any advice, I would appreciate it so much. Thanks Quinton

  15. Started by redae71,

    ive hooked up most of the wiring for my ca18 conversion but i can't remember what the voltage regulator that is bolted to the passenger side suspension tower is for? any one know for sure? ive been told it may be for my cluster gauges but id like a definite answer to be sure. also i have connected the battery and my dash lights don't work...

    • 6 replies
    • 9.6k views
  16. Started by RWannabe,

    Hi All, I own a 1989 Holden Nova with the 4AFC engine. Yes, I realise it's not a corolla but I figure it's only a few badges and some glue away from it so... Are you willing to help out a poor rolla wannabe? I was recently driving along, not a care in the world, when all of a sudden the engine completely died. I got the car towed home and sure enough, the timing belt was gone. So my question is this, is the 4AFC an interference or a non-interference engine? In other words, will I just have to replace the belt or is it a head off job? Thanks guys!

    • 8 replies
    • 8.7k views
  17. Started by toyota_ae71,

    G'day everyone My good ol' ae82 starting to go soft (really soft) and was wondering what spring/inserts people have used for perfect tuning! it does a little bit of motorkhana and khanacross but is also a street driven car so if you could just tell me what ya have under your beast and how she handles that would be tops! :P Cheers Corey

    • 16 replies
    • 9.8k views
  18. Started by aroome,

    ok know i know its a stupid question though id thought id ask any way. are there any other corollas that have the same type of front quarter panels as the ae86 corolla eg will the ae82 front quarter panels match up or are they different, some help would be great. thanks in advance dean...

    • 2 replies
    • 2.3k views
  19. Started by Bowler,

    Howdy folks i have a query involving uprghts - whats the difference between the ae82, and ae92 rear uprights. We're looking at installing koni shocks into an ae82, but without a listing from koni, and little info on the webs, we're unsure as to what will work. In the front, easy - ae92 struts are the same as twinky struts - so jus get hold of some front twinky hubs, and she'll be apples. The rear - ??? Conversely, if anyone here has installed konis into standard ae82 struts, would be more than interested in finding out how Cheers in advance Andrew

    • 10 replies
    • 10k views
  20. Hi Guys I need some help / advice if you can. Cheers I have a strange problem with a 1986 CS-X sedan. 200K+, 4AC, AE82, three speed auto. This car is in pretty good nick, both inside and out. The geezer I got it from had just replaced a bunch of bit and pieces. Dizzy cap, tires, all filters, timing belt, heaps of vac lines etc. I just put a fresh battery in as well. It runs really well around town. I have it idling at 750rpm when in drive (and auto choke is off)...hopefully that's not too low. So here is the problem. I drove it 100km out of town. All good on the way out. However, on the way home, the first time I had to slow down for a light it ra…

    • 10 replies
    • 16.2k views
  21. Started by SKA80R,

    I can't seem to find any pdf's on the AE71 corolla workshop manual? Can any one steer me in the right direction

    • 11 replies
    • 37.4k views
  22. Started by ravecord,

    Ahoy! I purchased a nice AE92 corolla seca cs with a 4afc carby engine a few months ago. It needed some work so i got it quite cheaply, but it was all fairly easily fixable things, mechically its excellent. I put a new timing belt, brakes, wheel drums on the back wheels, muffler, tyres and replaced some seals/caps and oil filters n its lovely now. It does have a few issues however, which i am trying to attend to, and i think the vast amount of knowledge of the people in this forum would be the best place to start. Ive gotten conflicting information from mechanics, the internet and my own knowledge. Firstly, when i cold start the engine, it revs low and rattles. I…

    • 4 replies
    • 3.6k views
  23. Started by scott35,

    i need some help fitting sports seats into a a82 1985 model up on the sunshine coast. :)

    • 8 replies
    • 4.2k views
  24. Started by wolfmanoz,

    Anyone done a guard replacement on an AE92 sedan ? Using the new one as a guide it looks like I need to drop the front bar ... is this right. A step by step would be appreciated.

    • 1 reply
    • 1.6k views
  25. Started by jaserolla,

    hi new member hear just bought a 91 sx with a 4agze gear box and i am trying to find out were to get the right cable to conect it to the joiner that is coming out of the fire wall any info would be great thanks

    • 1 reply
    • 2.1k views
  26. Started by Conquest00,

    I have a Corolla AE112R with 56,000k's and it's current oil doesn't look quite like golden brown, it's more a darker brown. Because I just bought the car I was thinking to run an engine flush treatment through before adding new oil. Toyota reckon that I shouldn't use their engine flush treatment because it could clean the engine too much causing more bad than good. Is there perhaps another engine flush treatment that I could use or should I just not worry about it and change the oil and leave it at that?

    • 6 replies
    • 6.3k views
  27. Hey guys I was reading this on autospeed (great web site!!!) http://autospeed.com/A_110474/cms/article.html I email the guy and he said that they normally need 20 orders before they go into the making proces. He said that they will do the manifold and throtal bodies for less that $100 if we can get enough together this could be one more little peformance mod we could make to the Mighty 4age!! let me know email me on [email protected] also please post your thought for every one to look at cheers

    • 3 replies
    • 3.4k views
  28. Started by Conquest00,

    We've just bought a 2000 Corolla Conquest and I want to know which oil to use for it? Toyota told me that they used 20W-50 on them and they told me to keep using this grade oil. Should I buy the oil from Toyota? Which oil grade do I go for? Oh and shes done 55,000 on the odo :bash:

    • 10 replies
    • 55.1k views
  29. Started by Jester,

    Hey Guys, So i'm replacing the head on my AE82's 4AC, just trying to figure out what torque setting the head bolts need to be set at.

    • 3 replies
    • 2.8k views
  30. Started by generia,

    The drivers side rear brake backing plate on my ae71 is bent and the drum scored and i'm having trouble finding one to replace it. I have a t18 that i will be parting out soon, can i use the entire rear axle / diff / brakes from that? if so is it a straight swap?.. if not what other options do i have?. Pic of the damage. Any advice would be much appreciated, cheers!

    • 7 replies
    • 3.7k views
  31. Started by n0ve,

    heya the old motor is sounding a bit rough, and she needs a tune up.. what exactly do i do for a tune up? ive done a few oil changes, new plugs and leads what else is there?

    • 12 replies
    • 5.6k views
  32. Started by tim.duncan,

    hey guys just a quick one does anyone know the numbers for a front oil seal? normally these seals will have 3 numbers the outside diam, the inside diam. and how wide they are. All i can find is what looks like a part number but that is no good to me at the moment. cheers guys

    • 0 replies
    • 1.7k views
  33. Started by TidyBoi,

    Hey guys, just a quick question, I have a 1992 corolla sedan, now I wanna get an exhaust system for that nice sound. Seeing as it's a 1.6 litre, my dad was saying that just getting a muffler won't give it a good sound, I'll need extractors etc. Can anyone gimme a list of exactly what I'll need for the sound I'm after, I want a grunty sound, but no drone in the cabin. Thanks.

    • 4 replies
    • 3.2k views
  34. Started by RollaCharged,

    Hey guys this is me first time on here so i should be sayin hi to all u guys first so Hi! ;) Anyways, ive come across a corolla to my liking but but needs alot of work to be back on the road,has no exhaust as of yet and bottom end has smeg itself... and the previous owner has pulled the engine to pieces, and i was thinking of rebuilding to whole engine to make it fair tuff... the original idea from the original owner was to have a turbo and supercharged setup... all i know for sure is that it has a 10-15psi pully on it, haltech ecu, gauges all over the show, race seat and a few other goodies sittin in the boot. Owner gave me the option to buy the frontmount cooler fr…

    • 2 replies
    • 2.1k views
  35. Started by SoulSearcher,

    Well my clutch has been playing up for a while, and last night I couldn't select reverse....and I forgot about the severity of the problem this morning...couldn't select reverse... turned the car off, gear selection is fine with and without clutch.... put it into reverse, start car, reverse works! YAY.... but then I couldn't get it out of reverse...turn car off... select first, start car, drive off YAY.... oh wait.... can't get it out of first! you see where I'm going with this??! Thought it could be the hydraulics, but the reservoirs were both full....so I called the RAA to see if they could pin-point the exact problem.... and OMFG! you know what the guy said??!?…

    • 14 replies
    • 7.8k views
  36. Started by Jester,

    Ok so i finally got the 4AC power box turned over and running, but apparently it's revving out at round about 1800RPM, Now to be completely honest i haven't heard t yet so this post may need to be updated/changed or even remonved in the morning but the old man got her living and i can't turn her over to see for myself now as it's 2:33am and don't wanna make him or the neighbours, but a lot of replies happen on here late at night early morning so hate to miss this opportunity for opinions. So far I've checked the Vacuum hoses and the Intake but all look ok and plumbed up right.

    • 4 replies
    • 3.1k views
  37. Started by nageset,

    Hi all, I was wondering where I could get a spare key remote for my 98 hatch.....the orig is very touchy and I'm sure it's gonna give up the ghost soon....Cheers

    • 4 replies
    • 1.7k views
  38. Started by nageset,

    G'day all, I've been trolling the boards for a while looking for pretty mods for my 98 hatch and a lot of guys mention JDM Style Headlights with twin globes and HARO type headlights. Can anyone shed some light on an Aussie supplier?? Also seen some tinted tailights looking good is this just glass tint paint ....? Thanks

    • 7 replies
    • 5.4k views
  39. Started by redae71,

    hey all i have an ae71 with ca18det..... i had the tailshaft made up for the std diff open wheeler, am going to weld it but i have heard of axles twisting and snapping, how long do you reckon it would last at around 200hp? what experiences have you had with welding these i.e. drivability vs performance gain?

    • 10 replies
    • 6.6k views
  40. Started by grindley4,

    just wanted to know if a ae92 sx intrustment culster would plug in to a csi dash. :lolcry:

    • 4 replies
    • 8.3k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.