AExx Corolla Discussion
1398 topics in this forum
-
Just wondering, cause they look fairly similar. Anybody?
-
- 1 reply
- 2.7k views
-
-
i was woundering what 4age engine cam with a 89 ae93 seca as i have found one cheap just want to make sure its worth it cheers in advance
-
- 1 reply
- 2.1k views
-
-
So for the last couple of weeks I've been gathering parts for the air intake piping and unfortunately, the diameter on the turbo was too small for the fabulous new SFS Racing silicone hosing in red (good upto 20psi!!!) that I got (2 x 90 and 2 lots of straights plus groovy hose clamps) so I went to Toyota to see if they had a genuine part..... Toyota Spare Parts department: "yes we do" Me: Great! How much is it going to cost me? Toyota Spare Parts department: $920.00 Me: WHAT!!! 920 dollars, are you insane?! 920 dollars.... Toyota Spare Parts department: yeah, you don't want it do you? me: uhhh no..... So off to Auto Sport Engineering, and f…
-
- 4 replies
- 3.7k views
-
-
I'm about 1/2 way through my twin throttle body setup in my gze, but all the time ive wondered how am i going to control bother TB at once, i really don't want to go electronic (PWM and servos...), iv thought of using those cable splitter you get on bikes, but the mechanism is quite tight. Ive seen a few twin TB gze around but i could never figure out how they do it? Idear, suggestions? J PS the 2nd one goes at the arrow
-
- 15 replies
- 5k views
-
-
Hi All - A friend of mine wants me to rebuild his transaxle/transmission for him if I can get the appropriate information for it... The car is a 2000 Corolla (8th Gen) Ae112 Man 5 Speed 1.8 ltr 7AFE.... I have tried to find some info on these 5 sp transaxle/transmissions but seem to have drawn a blank so far... but don't know specificly what designation the transaxle/transmision is for this model - ????? ANYONE here have any information thay can pass on as far as specifications, rebuild kits, prices, etc.... Disassembly and Assembly files for downloading - I believe the Bearings are a bit dodgy and some of the syncros have gone to lunch..... …
-
- 2 replies
- 2.6k views
-
-
Not that I would consider doing this, but if one wanted to, could someone tell me a bit more specifically about removing all the performance restricting emissions stuff or rendering it useless. Stuff like what to block or what to remove or what to do with the exhaust butterfly etc. Thanks in advance, 200Boy.
-
- 7 replies
- 3.1k views
-
-
Hey guys, I'm Mikos' mate who grabbed his (working) spare 86kw motor to put into my own AE82 Twin cam, but i don't know what the base timing at idle should be set to. I've just started at 7deg BTDC and have been slowly advancing it every day but have stopped doing it because it keeps taking it and wont ping!!! I'm not 100% on if it is or not due to all the under-bonnet noise from inlet/zorst, so i just left it where it is untill i can get a timing light and another ear to see if its pinging or not. i'm very aware of what it sounds like but with all the other noises that arre going on. anyone know what they run as a good timing setting on 95RON?? Cheers, Pau…
-
- 4 replies
- 4.6k views
-
-
Hey, i was just wondering if it is possible in any way to lower the front seats. i'm 6"4" tall when i purchased the car i was as tall. Does anyone know if it can be done? Are mechanics able to do it?
-
- 7 replies
- 2.7k views
-
-
I've got a 1989 AE95 AWD corolla (also known as a Tercel and an SR5). Something in the rear is noisy (probably the diff) and a cheap rear end from an 1986 tercel has come up and I was wondering if it would fit on? Anybody know?
-
- 10 replies
- 4.7k views
-
-
Hi all, looking for a mechanic, specifically on the Gold Coast or nearby who knows exactly what to do with a 4age. I need a full rebuild with some performance mods, and i don't mind paying for it. Can someone please give me the heads up? I just don't need to be frigged around.
-
- 4 replies
- 2.3k views
-
-
Hi guys, just after some (very) basic info, little unsure about something. My GF has an '89 AE92 Toyota Corolla Seca TwinCam 1.6 Carby, the compliance plate says the engine is the 4A-FC, but a small silver tag on the front of the camcover has 4A 4A/T printed on it. It is definately the original engine. What's the dealy-o? Is it officially ID'd as the 4A-FC? Is the 4A 4A/T merely a reference to it being a 4A block on Automatic Trans? I need to get a manual on it, but so far a few of the manuals I've found are specific to only one engine. I know next to nothing about these engines however I am very mechanically minded. I believe this engine runs a master cam a…
-
- 5 replies
- 7.3k views
-
-
Hello everyone Been visiting this site for a while but first post. I have a AE91 rolla (Yes AE91, its an import, don't ask how i got it). Its an EFI since its a jap import Its a 5speed 1.5litre EFI, and gives something like 80WK Some Pics: Engine No. Engine Bay Grill I also put some nice LED brake lights at the back. Will take some pics one night to show how good its looks. Also put in some nice Gauge background but due to flash in my camera, the pics are a little stuffed.Will try a mates camera next time. I am interested in getting some mods on it. (just in case u are thinking i am a 17 or 18 yr old don't worry am 21 off my P's. Finally got insura…
-
- 3 replies
- 2.9k views
-
-
Hey guys i recently noticed that the reflector in one of my headlights has come out of place on one side, and is pushed up towards the front of the light, so that it is sitting crooked inside the lens. I was wondering if anyone knows of a DIY way of pushing it back into place (and holding it there), as i am concerned about roadworthy. While i have checked that it doesnt shine in the eyes of other motorists, i would rather fix it now. My car is an AE82 sedan, i will try and get some pictures of the light sometime tomorrow. Any help would be greatly appreciated.
-
- 1 reply
- 1.7k views
-
-
Hey just after a bit of info. I have a sx seca with the 4age 16 valve small port. Does anyone know what compression they are ment to have when they come out stock? also is there a way test what compression your engine has ? if anyone knows something about this and can help me that would be awesome. thanks butty
-
- 2 replies
- 3.4k views
-
-
hey I'm Rob, I'm new to the rolla club and i would love help on how to mod my seca sx. i own a toyota seca sx it already had a sports exhaust and a sports engine installed in it. It is has 4age motor. I want it to have grunt but be legal as I'm on my P's and seem to attract the police attention as i drive by. I'm happy with the interoir so if anyone has any pointers or advice for the exteroir or for modifing my seca would be appreciated
-
- 3 replies
- 4k views
-
-
I'm trying to get the engine out of my newly purchased AE71 spirit to clean up the engine bay, change the clutch, etc, however I've hit a bit of a snag. We cannot seem to get any amount of decent force onto the top bolt in the back of the gearbox on the drivers side (RHD). Does anyone have any tips as to an easy way to get the bolt undone? It seems that whenever we get a ring spanner onto the bolthead, the other end of the spanner is either hitting the firewall, or we can't get it onto the head as it's fouling on the back of the engine? Any help would be much appreciated. The only thing I can come up with is buying a longer ring spanner that's straighter than …
-
- 15 replies
- 6.3k views
-
-
Was just wondering if anyone out there knows where or could point me in the right direction, to find an aftermarket chip for my 4age 16 valve smallport. Any other infomation about this would be great. thanks Butty
-
- 8 replies
- 3.3k views
-
-
hi all just signed up to your forums. i have a sprinter atm but maybe possibly changin to a ae82 twincam, or ae82 and doin a 20v conversion(always like the twinkys). i know this prob wont work but just seing if it might be possible. i have some xr4's that are 15/7/ -1, and 15/7.5/ +5, they are 4x114.3 offset. i had a search and found that ae82's are 4x100 but not sure? if theydont straight fit can i use a hub or struts etc from anything else, another car to fit them. i know they will stick out a bit but flaring doesnt scare me. cheers sly
-
- 7 replies
- 4.6k views
-
-
Hello, I'm new to the forum. Hi to everybody :) I just got my wife's college car back from her sister when she got a new car, so we could have something to scoot around in while my car's in the shop. It's a '91 Corolla DX wagon- AE95 I believe. Well, after putting about $900 into a new exhaust system, front brakes, CV axle, hubcaps, inspection, and labor, the transmission locked up on me in traffic yesterday and seems to be shot. I was wondering what I can do. Obviously the car is worth about $1200 at best (aside from sentimental value, of course), so I would be looking to repair or replace the transmission for no more than $300 to $500 total and then keep for a whil…
-
- 6 replies
- 5.1k views
-
-
Hi guys, i am having a prob with the seat belt light indicator not lighting up. What should i look at to figure out why it may not be lighting up. thanks guys
-
- 1 reply
- 1.7k views
-
-
Hey Hey, I'm trying to research what cam profiles are suited more to a 4agze with a sc14 running 11 pound. So far i have found that the bigport 4agze cams have 232 degrees duration and 7.1mm of lift which is the same as stock smallport 4age, Stock 4age bigports have 240 degrees duration and 7.56mm of lift. Mattysshop on Ae86dc said you can notice a difference between the 232 degree and the 240 degree cams but i don't know how much of a difference it would make ? I'm thinking of just going 4age bigport cams but i want to know how much of a difference first. I alsp have part numbers from mattysshop: 232's - intake 13501-16030 232's - ex 13502-16020 …
-
- 2 replies
- 19.6k views
-
-
first, are the intake and exhaust manifolds on an fe on the same side as on an lc? if so, could I swap just the head and keep it carbed for now, till I get a full ag engine to swap? I ask because I know a guy that has one that is in perfect condition he will give to me for 5 usd...... secondly, what suspension parts off newer corollas, like 101's and on will convert to my 82 sedan? thanks for any suggestions.... and I know everyone is going to say just swap the engine, but right now I am trying to locate a low miles one, with the full front clip, for the right price, close enough I can pick it up....thanks again
-
- 16 replies
- 9.9k views
-
-
Bought some T3 cam wheels and they don't match up with the standard timing marks. With the original wheels in place the timing is right but when i put the t3 wheels in place this happens vvv. It should look like this one vvv
-
- 6 replies
- 6.6k views
-
-
I've searched everywhere and can't seem to find any specs on the volume of the piston dish for 4A-GZE pistons. I want to know this as I'd like to calculate what my compression ratio would be with a different head gasket. All that I have been able to establish so far is that the volume of each cylinder in a 4A-GE 16v's head is 39cc. Now all I need is the volume of the piston dish so I can do the calculation. If anyone knows this figure, or has a spare 4A-GZE piston sitting around that they can measure the volume with, could you please post the answer up here. BTW, if there are any of you guys that work for Toyota who could get a definite answer on this figure, it w…
-
- 10 replies
- 4.5k views
-
-
I now have a 1994 AE102R Corolla Sprinter with front end damage. What I want to know is if any other model front guards, bumper, lights an grille will fit this model? not that fussed about keeping it orig. just want to get it back on the road without costing large sums of money. It already has a new/used LH front guard fitted that has AE100S writtin on it but I can not seem to find info on the AE100S. Can anyone help me with this please? ;)
-
- 4 replies
- 3.7k views
-
-
Hi Guys, I have a GTi Rolla with the standard 4AGE Engine, and for some time the Oil Pressure Dial hasn't worked. I'd like to get it back up and working, but am unsure of whats caused it to fail. All the other gauges work with no problem. Has anyone else had a similar problems with the gauge or know what I should be looking for to see if the gauge is faulty or wether its the oil pressure sender (i'm not too sure where its located on the block ) Anyone know what the senders are roughly worth? As TwinCams at the wreckers are hard to come by... Cheers.. Chris.
-
- 1 reply
- 4.5k views
-
-
Hey guys, Just wondering if you could rewire a ae111 power fc to suit a 16v 4age. I have looked at both wiring diagrams and it all seems pretty well straight forward except for the ignition wiring at both ecu's. For example the 16v ecu has 3 crank sensor wires they are named NE, G+, and G-. And the ae111 ecu has four wires named NE, G-, G1, and G2. However at the 16v dizzy there are four wires 2 for the crank sensor and 2 for the top dead sensor. Is it just simply a matter of rewiring it from the dizzy back to the power fc or is there something else i can do to get the signal to the power fc... Thanks guys any help would be great...
-
- 0 replies
- 2k views
-
-
Hey Everyone! I've only just joined up but i was wondering if someone could help me out. I just picked up a stocko AE112 (for the moment, anyway), and was curious as to wether there is a strut brace available for it. If i can get genuine toyota or TRD that would be great, but any kind would do.
-
- 6 replies
- 6.2k views
-
-
Dears, I've toyoto corolla wagon L-Touring limited 1998, I need some help 1. How many liters ATF to be use when I want to replace it. 2. How many liters Gear Oil GL-5 to be use when I want to replace it. Please do your best Thanks Best Regards. Faisal
-
- 0 replies
- 2.4k views
-
-
hey guys...was wondering if any of u Sportivo owners have upgraded the factory FMIC to a bigger one?if so..what dimensions FMIC did u use thats working and fits nicely..pics would be great too... cheers!
-
- 6 replies
- 4.1k views
-
-
hey there. I was thinking about changing the air box on my 1992 sx seca 4age to a Pod filter, but am not sure about what you would do with the sensors in the box? is there a special pre made pipe or something you just replace the old one with? Also does a pod offer much more power then the stock set up.I have a K&N panel filter in it atm also. any advice would be much appreciated thanks.
-
- 8 replies
- 16.7k views
-
-
I have just brought my first ae71. I just did a search, i was gunna ask about putting a twin cam head on the 4ac, but heard it was a waste of time. mine is an auto and that was why i was trying to find out so i did'nt have to piss fart around with flywheels. Having said that, has anyone bolted a 4age up to the standard auto?. What is involved?
-
- 19 replies
- 10k views
-
-
Hey guys, Just wondering, the little lip that the AE112 Levin, Sportivo & possibly even Ultima have, can you buy them seperatly or are you up for a whole new bumper. I've seen a few rollas getting around with painted bumpers and just a black plastic lip, (see image below) which makes me think they're just an add-on to the stock bumper. Any help would be appreciated. Cheers.
-
- 2 replies
- 7.2k views
-
-
I have an AE72 sedan, and I'm assuming that it isn't much different than an AE71 with the same motor. If I'm reading a lot of the info I see correctly, then most parts from an AE86 will fit right on without difficulty. Am I giving myself false hope, or will it really work?
-
- 0 replies
- 1.9k views
-
-
I have a part that I need to source, if someone can give me the part number or what type of toyota its from that'll be great, as at the moment I don't know what car it is from. The mechanic pulled it out of my AE92 Corolla, but I'm still unsure about what engine/gearbox is in it. It is an AFM GZE, and its connected to either a 4AGE or 4AGZE gearbox (FWD). Is there a difference between the two in terms of selector cables? I need to know this information by Monday. Cheers.
-
- 0 replies
- 1.4k views
-
-
Hi all, I've got a 1987 Corolla Seca, AE82 single cam... I want to replace the heater hoses on my car but I'm not sure what their diameter is. I did a search and nothing came up, so my apologies if this has been covered before. I've done this job on my other cars (Chrysler Valiants), but I just want to ensure I use the right hose size for the Corolla. Thanks heaps, :jamie: Cheers.
-
Hey all, I have a problem... well, it can be viewed as a good thing if you like! My car is an AE82 twincam hatch running a 20valve bottom end with a std bigport head and efi setup... before you say it shouldnt work, it does and is fantastic to drive! After the engine swap, I have to say I was a little disapointed with the performance. But now it going crazy... The car used to hesitate when you hit the accelerator and then would slowly get going (well, not that slow) until the tvis point where it would go like a rocket. Now it revs freely and has much crisper acceleration and the induction noise is wild! I'm running a pod so it was great before but now I can't he…
-
- 17 replies
- 4.9k views
-
-
hello can any one here tell me where i can find some after market rear tail lights for my ae92
-
- 3 replies
- 3k views
-
-
Before you say search........ Ive been researching suspension set ups and I still can't find out what suspension I can put in the front of my 71 please help me it doesnt have to be road legal cause its going to be a pure drift car
-
- 6 replies
- 3.5k views
-
-
OK seems a pretty comon prob that 2nd gear syncro goes in an AE101 gear box i know mine has seen beter days, this may seem like a silly question but has any one looked in to why???, coz my father in laws has shit it self but he drives like a granny!!! coz I'm sure quick shift high revs from first to second will stuff any gear box but the 101 seems to be a little brittle!!! :jamie:
-
- 7 replies
- 3.4k views
-