AExx Corolla Discussion
1398 topics in this forum
-
two things in the title, thought i'd kill two birds with one stone. firstly i really wanna upgrade my brakes, right now they're the standard set. i heard that the 20v model (and gze) have bigger brakes (front disks) and i was wondering if anyone here knew what work was involved in fitting them. I'm getting the d2 coilovers soon (any advice on if/why d2 are bad?) so i'm not sure if that would complicate the upgrade. second, my clutch has about 5+cm of freeplay and it's driving me nuts. feels like i'm driving a short-ass, weak-ass clutch and it's really frustrating on slow moving traffic... i know where to adjust it, but the nut is 1. dam hard to get to unless you're a m…
-
- 6 replies
- 4.6k views
-
-
Hi All, It has been a very very long time since I've had to back flush a coolant system, and wanted to get some advice on how to do it on my AE82 Twin Cam. Had an overheating issue (found to be a dead thermo fan switch - thanks to Thomo - who if you're reading please check your PM) so figure while I'm replacing the fan switch I might as well replace the thermostat and radiator cap, flush the coolant and put in new coolant so I have a known quantity. Any advice appreciated. Cheers, Todd
-
- 11 replies
- 4.7k views
-
-
hi i'm new to rolla club and found the site just after i got my first car, a 1983 corolla AE71 with a 4a-c and 5 speed. ive been lookin around for tips to boost the horsepower on the 4a-c for awhile and the most ive found out is "just get a 4a-ge". so i wanted to start a project on trying to double the horsepower on my 4a-c before i get my license so i have enough money to do it before i have to start paying insurance for it. So far i've been saving up for a new set of pacesetter headers and a straight pipe back to a ractive muffler and a paradise racing power pack for the 4a-c. I'm also gunna replace the radiator fan with an electric one and take out the a/c. i was …
-
- 17 replies
- 10.5k views
-
-
Hi All, I have an AE82 Twin Cam with aircon - went to do my first oil filter change today. WTF?! Talk about impossible to get to the oil filter! Exhaust blocks it from top, air con compressor blocks from bottom - can sort of get to it going past starter and behind exhaust manifold. Is there a trick or a filter wrench that anyone can recommend? Mine just wasn't going to work. Ended up just doing an oil change... Cheers, Todd
-
- 7 replies
- 8.9k views
-
-
Hi All, In the process of putting new KYB Excel-G shocks and Lovells Sport Lows (a 25-40mm drop) springs in to my AE82 Twinky. Bought new Monroe Strut Mate kits for each corner to put new bump stops in. My question is, with the Lovells dropping the car down, do I need to cut the bump stops down? If so, how much by, and what will happen if I don't? Cheers, Todd
-
- 2 replies
- 3.2k views
-
-
Hi All, Replaced the rear shocks/springs in my AE82 Twinky last weekend, this weekend I'm going to tackle the fronts. Any hints or tips? I think I need to disconnect the brake lines to swap in the new struts - anything I'll need (besides an assistant to help me bleed the brakes after)? I think I remember reading somewhere I'll need a new compression washer? What brake fluid should I use? Cheers, Todd
-
- 1 reply
- 2.2k views
-
-
hi, i just signed up, had a look through prev topics and didn't see this so excuse me if i missed it. basically i've got a ae92 with supalows and 17s, it scrapes when i go over bumps kinda 'quicker' but if i got someone in back, it scrapes on smallish bumps even when goin slow... so i went round to see who could roll my guards and only found one place (dam hobart) said he would do it for 80 bucks, but he said he'd just bash em out with a rubber mallet...i could do that. anywho i'm just seeking some advice before i go ahead and bash it out a bit... hope you guys can get back to me asap before i ruin something on my car that i love so much. thanks, tibor ps. what …
-
- 10 replies
- 6.4k views
-
-
Hi All, Just wondering if anybody has fitted seats from other cars (eg: MR2, WRX) into an AE82 Twin Cam? The driver's seat in my car is pretty much shagged - trim worn through, too much movement in the seat back - high mileage car. So looking for low cost alternatives as the car is a cheapie - so buying new Sparco's doesn't make much sense. Any help/suggestions/photos much appreciated. Oh, and any suggestions on reco'ing the seat rails so they're not so sloppy appreciated as well. Cheers, Todd
-
- 4 replies
- 2.8k views
-
-
does anyone know if it is possible to fit a 4AGE into a AE80 East/west fwd corolla, I have only seen a 4AGE in pictures and my best guess would be yes but would be a tight fit, so hoping sombody out there has either tryed it or has heard/seen it done, ~coyote~
-
- 3 replies
- 3.5k views
-
-
Ive been looking around for a wile now and there no info on how to install them. I was going to ask the windscreen guy to put it in but he wanted about 120 and said it wasnt worth it, he told me how to do it and now i carnt really remeber what he said :rolleyes: he said something about putting 'rope' around the rubber seal and using selant and belting it in? Come some help please J ps ae71
-
- 7 replies
- 2.9k views
-
-
hey guys and girls my ae82 seca changes real nice when just cruising around but when pick up revs while racing somone or whatever it grinds and carrys on abit its only from 2nd to 3rd is it just me being a shity driver or is it the tranny telling me something important and I'm not listening.cheers :lolcry: oh yea and its a 5 speed
-
- 16 replies
- 9.8k views
-
-
Which way does the thrustbearing go on the bearing carrier? One sides got a slight slope on it and the other has a grove in the ID. I think the slight slope side should go facing the pressure plate. :) But i don't really know. Help please
-
- 6 replies
- 2.9k views
-
-
ok people.i have a ae92 half cut it has a 4agze in it.its AFM, DLI, CAS. i have looked in club4ag, i have been looking on the net for about 6 hours now and nothing.i tried toyota nothing, auto1 nothing, repco nothing.its got hks printed under the afm i tried them nothing.if i can't find a wiring diagram its off to the auto elec and lots of money goin to him.its goin into a ae82 seca. :P
-
- 5 replies
- 10.5k views
-
-
Hello! OK here's something weird that happened tonight....It was rainy and the roads were wet, a guy in front of me was turning and then braked half way through his turn (I have no idea why) but he didn't give much notice before slamming on his brakes and turning then stopping mid-turn. So I'm madly down shifting and thought I was going to come to a complete stop, but then he moved, so I was in first and I put my foot down and ACCIDENTALLY spun the wheels. I was going up-hill and I got the chugga chugga thing (vibrations from the front - which incidentally I don't think is normal, but has been happening since I had the last lot of work done) well...after my spin and…
-
- 6 replies
- 4k views
-
-
i'm working with a mate on his ae112, and we're looking to try and get as much power out of it as possible. at the moment, he's wanting an increase in the lower end power, and wants to improve responsiveness as best he can. he's currently got a 2" catback and pod filter atm, but a CAI is coming very shortly. being a noob with toyotas, what sort of things can we do to squeeze out any extra power? i think its the 4afe engine?
-
- 15 replies
- 8.9k views
-
-
Hey guys I was wondering if anyone had replaced the green tinged screen on their AE71/KE70 instrument clusters? coming from a T-18 the green tinge really shits me off Its flat and only glued on, looks like itll be simple to replace, anyone done this, any pics? Phill
-
- 8 replies
- 4.3k views
-
-
I have a problem with my microtech lt8 running my ST 20 v. When I turn the lights on and off the revs change not just the lights also the central locking heater etc. My tuner said this is a common thing with microtech? Is this true.
-
- 2 replies
- 2.6k views
-
-
Hi, I have a problem with my AE82 Twin Cam rolla. The car has lost almost all low down grunt. It still runs as per usual above 4400rpm, and will still rev cleanly to redline but anything below that point is just a joke. From taking off at traffic lights to overtaking, its almost dangerous Has anyone had this problem before? I was thinking that the TVIS butterflies are stuck open? Any ideas?
-
- 11 replies
- 4.4k views
-
-
Hello, I am the owner of 7AFE powered AE102 Corolla in the US.. I've recently got wind that you guys have a factory turbocharged Corolla! I'm really intrested in the mechanics and engineering behind it.. from what I understand Toyota simply bolted on a turbo kit to a stock block and upgraded the fuel managment leaving the block and internals untouched.. And with that the factory boost is set to 8psi? Well I am thinking about building my own turbo kit but I am running into problems with intercooler plumbing.. Like how did Toyota bend the chargepipes around the factory foglights for the intercooler? Any pictures or infomation would be much appeciated!
-
- 11 replies
- 19.1k views
-
-
Which one do i use for my ae71? they bolt holes for the larger one (assuming ae86) line up with the ae71 car but only use the extruded holes.. they both look the same in profie but I'm asking to to make sure can i use either (rather use the smaller one as it would be eaiser to mount due to not having empty bolt holes n shit)
-
- 1 reply
- 2.4k views
-
-
Hey does any body know what the name of the thing the throwout bearings sits on? It has two little prongs were the clucth fork touches? I really need one as the Gbox i got didnt have one and where would i get one, ive beein ringing around and no one has a fuking clue what I'm talking about BTW its a T50
-
- 5 replies
- 14.3k views
-
-
as the title suggests, i'm interested in some bodykit parts for my AE112. if anyone knows if aftermarket kits exist or are available please let me know, thanks.
-
- 14 replies
- 24.6k views
-
-
Hi, I got me a alarm kit today and i was planning on installing it myself. I was wondering if anyone has done this in a AE92 or knows what to do? Some of the things i need help with is where i need to mount all the components, What type of door lock unit i have (Pos+ or Neg-), any other help or photos would be great. even drawings in paint :dance:. Its a Csi AE92 with standard central locking. its a "steel mate" brand of alarm if that helps. its got these cool pager keyring things. so any help would be great. thanks guys! It has a Sh*t load of wires and the little book isnt much help.
-
- 11 replies
- 8.5k views
-
-
hi, coils? can someone please help in explaining coils and every thing that goes with them to me.. I got my hands on a new bosch gtr 40 i think its called, installed it just how the original coil came out. The car was running pretty shotty, on accel in the 5,500-7,000 rpm range it would miss and splutter and carry on. Is this because its not being grounded very well? Also, what is the little cylindrical shaped thingy that is attached to the positive terminal of the coil via a wire, its bolted to a bracket on the actual coil bracket. i took it off and it did nothing....? Cylinder 3 spark plug is loosening off by itself, i don't kno why Any help with any of th…
-
- 0 replies
- 2.1k views
-
-
I'm getting rid if my monster taco and I want to wire up the oem item. The signal now comes from microtech how do I work out which wire to join it to in the loom to get the stock taco going again.
-
- 3 replies
- 2.9k views
-
-
Need help. A hose fell off my silvertop 4age and I don't know what should go there, or where it should go. It is on the rocker cover RHS looking from the front. My car runs microtech so I don't have an air box, I have looked at some photos of similar motors the hose runs into the air box . I don't have one so where should I run it? Should I run a short length of hose to a small filter ?
-
- 4 replies
- 2.7k views
-
-
Just wondering how much these diffs can handle (hp) I pressume their are plently of centres available as well lsd 2-ways etc. Lastly what is the measurment from disc fdace to disc face. (where back of wheel touches on each side) Cheers Robbo
-
- 6 replies
- 4.7k views
-
-
hey people, i have a ae82 and my rear drivers side drum keeps sticking, i have replaced wheel cylinders, fluid and pads and it still does it so does anyone have any ideas why its still doin it. :jealous:
-
- 11 replies
- 5.9k views
-
-
I've been hearing (and feeling) a bit of a knock somewhere in the front of the car for about 2 weeks now, and finally decided to take a look today, and found that the front left wheel was loose and i could wobble it around a fair bit. My first thought was that the wheel nuts were loose, but this wasnt the case, the whole hub/strut was wobbling round, so i took the wheel off and discovered that where the hub connects to the tie rod is loose as can be seen below: So now i'm just wondering whether there is meant to be some sort of bush in there or is it stuffed. thanks in advance to whoever can help me as i am a noob at this sort of stuff Lammi
-
- 2 replies
- 2.7k views
-
-
Hurro, WELL, I took broomdey into Toyota for it's 60,000klm service, and I asked them to look into the noise in the front end. Well it turns out that the car needs a new Driveshaft and other bits, total cost $800 including labour....*heart stopped* then I remembered...I've got warranty!!!! So I asked if it was covered, and it WAS!!! So, next week I'm getting new driveshaft and front bits! I love Toyota's and their extended warranty! So, here's the silly question..... What exactly is the driveshaft?? Is that the bit that the CV joints join onto on each side?? Lesley :P
-
- 5 replies
- 3.5k views
-
-
i know there is some hardcore toyota tech heads on here!!! so what does a t series weigh (t18 series 2) complete with centre, axles, drums etc.
-
- 2 replies
- 1.9k views
-
-
-
i have a ae82 seca it had a 4a-c clunker in it now it has a 4a-fc do i need a mod plate or anything like that somefella told me cause I'm replacing a 4a motor with a 4a motor that i don't need one but this fella isnt very reputable. cheers
-
- 2 replies
- 3.2k views
-
-
Hi All, Just trying to work out what size tyres were on the AE82 Twin Cam bin lid alloys. I currently have 175/65R14 on front and 195/65R14 on back - cheap and nasties so looking to replace. Had a major moment in the wet the other day... And also what is a popular replacement tyre size? I'm sticking to the factory 14" mags - no money for 15"s and the look is growing on me. Oh, and anyone had any experience with Dunlop Le Mans LM600s? Cheers, Todd
-
- 3 replies
- 8.8k views
-
-
hi ive got a auto 1.3 ae80 which is slow as ?%#@ but it handles well and i like it. i want too put a 4A motor or the twin cam that was available with the ae80 (i think) does any one know if there are any difficulies with an auto to manual conv. or a twin cam that would fit, like does the 4AGE fit? thanks :D :jealous:
-
- 1 reply
- 2.9k views
-
-
i was wondering if the engine mounts in the ae80 are the same as those found in the ae82 twin cam...? iv just bought an ae80 with a 1.3 sohc carby and want to dump a 4agze in it. i kno i could of started with the ae82 but this car has 60,000 klms on the clock and its in supreme condition. Any help is much appreciated.
-
- 4 replies
- 4.2k views
-
-
hi I'm looking for a place in melbourne where i can get parts for me Ae 92 rolla with the 6a engine. took me ages to find the replacement engine, but parts seem to be like hens teeth. if you can help that would be great :harhar:
-
- 8 replies
- 5.2k views
-
-
hi all i recently purchased a 1989 corolla seca witha 4agze (advertised on this site). now its had all the gear (supercharger, brakes, box,LSD etc) now as he was driving to our place of trade he said that a rock hit the O2 sensor or sumthing, and now it runs crapply, like it runs and stuff but it uses a shit load of fuel, halfa a tank to go 110kms, and has hardly ne power at all!!! so is it the o2 sensor or something else?? ASAP!!!!! pauly [email protected]
-
- 25 replies
- 34.8k views
-
-
Hey guys, just picked up my second corolla, a stock as a rock 87 CS, it's nice to burn around until you try to hit a corner with speed and then it all goes out the window. So basically I'm looking for a cheap suspension upgrade, nothing too wild as its just gonna be my Daily driver. so far I'm thinking.... Install the front Strut from a twin cam as the CS came without one replace all the bushes new springs and shocks (prob pedders sportsryder pack) Rear Strut (anyone know a good dealer pref. in SA) And eventually Swaybars (anyone got suggestions as to what works well with what I'm looking for?) Plus i will soon have some 15's to replace the stock 13" r…
-
- 3 replies
- 22.8k views
-
-
Hi! I'm new to this site, and would like to try and get some information on a 4AGE engine swap. I purchased a 4AGE engine complete with wiring harness's, computer, the whole nine yards, supposedly from came from Japan. Came out of a Corolla, and or a Levin? Something like that. Anyway,.. Now... my question is... I purchased the engine to swap it into a 2001 Corolla S body. I wanted to try and find out, what I needed if anything, to do this swap. What problems, if any, I can anticipate, and if this is something that could be done. The Engine depot that I purchased the engine from, said it is definitely a swap, but couldn't really give me any additional supporting informa…
-
- 3 replies
- 8.1k views
-